Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Replacement carving blades for MSG
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	Collet Set for accurate use on round components
1 x	Combi cutter 6.5/2.5mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Five piece HSS chisel set
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
3 x	Precision steel vice PM 40
3 x	Blade guides separately
2 x	sanding belts for BBS/s Grit 150
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Brass brushes
2 x	Independent four jaw chuck for the DB 250
2 x	Multiform grindstone
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cone shaped milling cutter
2 x	sanding belts for BBS/s Grit 80
3 x	Bandsaw blade of bimetal for MBS 240/E
2 x	MICROMOT Mains Adapter NG 2/S
2 x	Drill chuck with sliding sleeve for the tailstock
1 x	Diamond blade for MBS 240/E
1 x	Centre Turning Attachment
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Sanding Drums
1 x	HSS drill bits 1.2mm
1 x	HSS drill bits 0.8mm
2 x	MICROMOT drill stand MB 200
2 x	Protective device for hand-operated MICROMOT
1 x	Screwdriver bit set. 49-piece.
2 x	Mill/Drill Unit BFB 2000.
2 x	Super-Cut
1 x	Sanding bands 14x13mm
1 x	HSS drill bits 1.6mm
1 x	Sanding Drums
1 x	Sanding Discs
1 x	High quality corundum grinding bits
2 x	MICROMOT steel collet set
1 x	Diamond Twist Drills
1 x	Nylon Fleece Brushes
2 x	Diamond Coated
3 x	Three piece thread cutting set
1 x	Tungsten carbide drills Ø1,5mm
2 x	MICROMOT extension cord. 300cm.
1 x	High quality corundum grinding bits
1 x	HSS drill bits 1.0mm
4 x	Aluminium Die-Cast
2 x	Footswitch FS
1 x	Tungsten carbide drills Ø1mm
2 x	MICROMOT tool holder
5 x	14-piece parallel supports set
1 x	Tungsten carbide drills Ø2mm
2 x	Flexishaft MICROMOT 110/BF
1 x	Metal Cutting Blades
1 x	HSS drill bits 0.5mm
2 x	Flexishaft MICROMOT 110/P
2 x	Diamond-coated cutting disc for MIC
2 x	2-speed scroll saw DSH
1 x	Three-jaw steel drill chuck
2 x	10-piece wood router cutter set
2 x	Ball shaped milling cutters
2 x	Angle polisher WP/E
2 x	Bench drill machine TBM 220
1 x	Angle cutter 45 °
1 x	DIL44/QFN44-2 ZIF-CS
1 x	Micro Compound Table KT 70
2 x	Bench drill press TBH
1 x	Ball-shaped diamond coated 3.2mm
2 x	Bench Circular Saw KS 230
3 x	Supercut jig saw blades of special steel
3 x	Jig saw blades made of HSS
2 x
2 x	Band knife of hardened spring band steel (without teeth)
1 x	sanding belts for BBS/s Grit 240
2 x	Blade for Steel and brass
2 x	Belt sander BS/E
2 x	Ball-shaped diamond coated 2.2mm
2 x	Ball-shaped diamond coated 1.2mm
1 x	Three jaw chuck for the lathe DB 250
2 x	Belt sander BBS/S
2 x	Backing disc for LWS
1 x	Step clamps made of steel
1 x	Tungsten carbide cutters set
1 x	Machine Vice MS 4
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Diamond-coated cutting and roughing disc
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Table Sawr TKS 315 E
1 x	BGA-Bottom-207
2 x	Table Saw TKS 2500 SC
1 x	BGA-Bottom-209
3 x	Vacum SAA 901
1 x	surface planing and thicknessing ADH 200
1 x	Wood Lathe DB450
1 x	Wood Lathe DB900
3 x	BGA-0245/0242
2 x	surface planing and thicknessing ADH 250
2 x	Flexible silicon discs
1 x	BGA-Bottom-202
2 x	Flexible polishing pad set
1 x	Flexible silicon discs
1 x	BGA-Bottom-105
2 x	HSS boring tool set, 6 pieces
1 x	DIL48/PLCC52 ZIF-CS 68HC11
2 x	Precision lathe PD 250/E
2 x	Flexible silicon discs
2 x	Lathe System PD 400
2 x	Felt polishers
3 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	BGA-Bottom-20
2 x	Fluted filter for CW-matic
1 x	BGA-Bottom-9
1 x	BGA-Bottom-174
1 x	ESD Tweezers 5-194
1 x	BGA-Bottom-126
1 x	BGA-Bottom-10
1 x	ESD Tweezers 5-195
1 x	BGA-Bottom-192
1 x	BGA-Bottom-177
1 x	BGA-Bottom-118
1 x	BGA-Bottom-165
1 x	BGA-Bottom-164
1 x	BGA-Bottom-171
1 x	BGA-Bottom-19
1 x	BGA-Bottom-102
1 x	ESD Tweezers 5-192
1 x	BGA-Bottom-11
1 x	BGA-0245/0241
1 x	BGA-Bottom-111
1 x	BGA-Bottom-195
1 x	EUROline-Conductive set of pliers
1 x	ESD Tweezers 5-191
1 x	BGA-Bottom-166

€24,849.73