Top » Catalog » Programmers and acessories » GANG programmers » 60-0053

€3,320.00 + VAT

BeeHive204
[60-0053]

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
four independent universal programming modules (BeeProg2 based) in one unit
two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
powerful independent pin driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
Very low voltage support for latest Flash memory chips
ESD protection on each pin of the sockets
USB (up to 480 Mbit/s) interface to PC
comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
approved by CE laboratory to meet CE requirements
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews

Shopping Cart

1 x	Solid carbide saw blade
1 x	Super-fine sanding discs grain 400
1 x	BGA-Bottom-196
1 x	MICROMOT 50/E
1 x	MICRO Heat gun MH 550
1 x	sandpaper for PS 13 Grit 400
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	BGA-Bottom-214
1 x	Blade holders for DS 460
2 x	MICROMOT Mains Adapter NG 5/E
1 x	BIT-SET
1 x	MICROFLAME burner MFB/E
2 x	BGA-Bottom-111
2 x	Tungsten Carbide Tipped (TCT)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Jig saw blades made of HSS
1 x	BGA-Bottom-209
1 x	Machine Vice MS 4
3 x	BeeHive208S
1 x	sandpaper for PS 13 Grot 180
1 x	Bench drill machine TBM 220
1 x	BGA-Bottom-2
1 x	MICROMOT 50/EF
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Precision steel vice PM 40
1 x	BGA-Bottom-21
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	MICROMOT Mains Adapter NG 2/S
2 x	BGA-0246/0244
1 x	Hot wire cutter THERMOCUT 650
1 x	BGA-Bottom-211
2 x	Router base OFV
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Complete Engraving Kit with trial glass
1 x	sandpaper for PS 13 Grit 240
1 x	MICROFLAM gas soldering set MGS
1 x	MICRO Miller FF 500
1 x	Precision drill grinder FBS 12/EF
1 x	Hot wire cutter THERMOCUT 230/E
1 x	ACCENT SERVICE TOOLS SET
1 x	MICRO Miller MF 70
1 x	Precision Drill/Grinder FBS 240/E
1 x	BGA-Bottom-212
2 x	BGA-0245/0242
2 x	Engraving tool GG
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	BGA-Bottom-10
1 x	MICRO-screwdrivers
1 x	BGA-Bottom-198
2 x	Glass fibre contact cleaner brush
1 x	MICROMOT 50
1 x	Bench drill press TBH
3 x	BGA-Bottom-102
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	BGA-Bottom-194
1 x	MICRO Miller FF 230
3 x	BGA-Bottom-106
1 x	Tungsten carbide cutters set
1 x	BGA-Bottom-207
1 x	Hot wire cutter THERMOCUT 12/E
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Mill/Drill System BFW 40/E
1 x	Universal holder UHZ
1 x	BGA-Bottom-20
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Supercut jig saw blades of special steel
1 x	MICROMOT glue gun HKP 220
1 x	BGA-Bottom-199
2 x	Step clamps made of steel
1 x	Long neck straight drill/grinder LB/E
2 x	BGA-Bottom-216
2 x	EUROline-Conductive set of pliers
1 x	Glass fibre contact cleaner brush
1 x	BGA-Bottom-208
2 x	BGA-Bottom-217
1 x	BGA-Bottom-201
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
3 x	BGA-0246/0243
1 x	BGA-Bottom-215
1 x	Professional Drill/Grinder IBS/E
1 x	MICROMOT 230/E
1 x	BGA-Bottom-202
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	BGA-Bottom-101
1 x	surface planing and thicknessing ADH 200
1 x	Independent four jaw chuck for the DB 250
1 x	Flap Wheels
1 x	sanding belts for BBS/s Grit 80
1 x	Silicon-Carbide.
2 x	Beeprog2C
1 x	Replacement carving blades for MSG
1 x	Blade guides separately
1 x	BGA-Bottom-221
1 x	End side cutters EUROline-Conductive
1 x	sanding belts for BBS/s Grit 150
1 x	BGA-Bottom-8
1 x	Replacement belts for BSL 220/E
1 x	End side cutters 45º EUROline-Conductive
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	BeeProg2
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Diamond blade for MBS 240/E
2 x	Centre Turning Attachment
1 x	BGA-Bottom-224
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Grinding and Polishing Machine SP/E
1 x	BGA-Bottom-229
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Three-jaw steel drill chuck
1 x	Chuck for TBM 220
1 x	BGA-Bottom-222
1 x	BGA-Bottom-88
1 x	Disc Sander TG 125/E
1 x	Gear Chuck
1 x	Disc Sander TG 250/E
1 x	HSS cutting blade for OZI
1 x	Fixed Steady
1 x	Replacement belts for BSL 220/E
1 x	Special Fused Alumina (Hardness N).
1 x	Sanding pads for OZI 220/E grit 240
1 x	Belt sander BS/E
1 x	Belt sander BBS/S
2 x	Universal and oil siphoning pump AP 12
1 x	Bottom PSOP44 NOR-1
2 x	Pensander PS 13
2 x	Replacement glue sticks for HKP 220
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Angle polisher WP/E
1 x	Sanding pads for OZI 220/E grit 80
1 x
1 x	Side cutters EUROline-Conductive
1 x	BGA-Bottom-1
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Three jaw chuck for the lathe DB 250
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Delta sander OZI/E
1 x	BGA-Bottom-225
1 x	HSS immersion saw blades for OZI
1 x	Sanding pads for OZI 220/E grit 150
1 x	BGA-Bottom-22
1 x	Four Jaw Chuck
1 x	HSS immersion saw blades for OZI
1 x	Band knife of hardened spring band steel (without teeth)
1 x	BGA-Bottom-231
1 x	Dividing attachment TA 230 for PF 250
2 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-223
1 x	Blade for Wood and Plastics
1 x	Polishing machine PM 100
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Top-5 ZIF-CS
1 x	Multiform grindstone
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Vacum SAA 901
1 x	Collet Set for accurate use on round components
1 x	surface planing and thicknessing ADH 250
1 x	BGA-Top-132 ZIF-CS
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-9
1 x	Diamond cutting blade for OZI
1 x	Mini side cutters EUROline-Conductive
1 x	Blade for Steel and brass
1 x	Replacement belts for BSL 220/E
1 x	Mini side cutters EUROline-Conductive
1 x	BGA-Bottom-5
1 x	Tool holder for rotary tools
1 x	sanding belts for BBS/s Grit 240
1 x	BeeHive204
1 x	Long neck angle grinder LHW
1 x	ESD-handling ser 9-361
1 x	BGA-Bottom-144
1 x	BGA-Bottom-132
1 x	BGA-Bottom-15
1 x	Super-Cut
1 x	Grinding mop cylinder grit 120
1 x	Footswitch FS
1 x	Slot cutter 6.5mm
1 x	BGA-Bottom-126
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	BGA-Bottom-13
1 x	Slot cutter 3.2mm
1 x	BGA-Bottom-127
1 x	BGA-Bottom-151
1 x	10-piece wood router cutter set
1 x	Half round cutter 13mm
1 x	BGA-Bottom-138
1 x	BGA-Bottom-139
1 x	Rounding over cutter 6.4mm
1 x	Combi cutter 6.5/2.5mm
1 x	BGA-Bottom-150
1 x	BGA-Bottom-146
1 x	Spare cutting wire
1 x	Super safety and specialty bit set, 75-piece
1 x	Rebating cutter 6.4mm
1 x	MICROMOT Mains Adapter NG 2/E
1 x	ESD-handling set
1 x	BGA-Bottom-147
1 x	BGA-Bottom-149
1 x	V-slot cutter 6.5mm
1 x	Grinding mop cylinder grit 240
1 x	Diamond Coated
1 x	Wood Lathe DB900
1 x	Angle cutter 45 °
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-140
1 x	BGA-Bottom-141
1 x	Grinding mop cylinder grit 120
1 x	BGA-Bottom-148
1 x	Screwdriver bit set. 49-piece.
1 x	BGA-Bottom-135
1 x	DIL20/PLCC20 ZIF-CS
1 x	Bottom PSOP44 NOR-2
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Scroll saw DS 230/E
1 x	Super jig saw STS/E
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	MICRO Band Saw MBS 240/E
1 x	Multipurpose Vices Primus100
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Sanding fleece for LWS
1 x	Brass contact cleaner brush
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Corundum bound cutting disc for LWS
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Table Sawr TKS 315 E
1 x	BGA-Bottom-11
1 x	DIL20W/PLCC20 ZIF
1 x	BGA-Bottom-105
1 x	Corundum grinding disc for LWS
1 x	DIL24/QSOP24 ZIF 150mil
1 x	Bench Circular Saw KS 230
1 x	Tungstein carbide rasp - and cutting disc
1 x	Diamond-coated cutting and roughing disc
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Bottom PSOP44 NOR-3
1 x	Thicknesser DH 40
1 x	Corundum sanding discs for LWS

€56,263.71