Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL44/TQFP44-1 Zif
1 x	4-jaw chuck individually clamping 125mm
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	4-jaw chuck individually clamping 80mm
1 x	DIL40/TQFP64 ZIF CC-1
1 x	BGA-Bottom-1
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	DIL40/TQFP44 ZIF EM652X
1 x	BGA-Bottom-101
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	4-jaw chuck individually clamping 100mm
2 x	Parting tool 10mm
1 x	DIL48/TQFP64-2 ZIF ST7-1
1 x	DIL48/TQFP64-2 ZIF HC908-2
1 x	BGA-Bottom-10
1 x	DIL48/TQFP64 ZIF MSC1210
1 x	DIL48/TQFP64-1 ZIF ST7-1
1 x	DIL48/TQFP64 ZIF HC908-2
1 x	BGA-Bottom-105
1 x	sclcr2525M12
2 x	Sanding Drums
1 x	quantum revolving center CM1
2 x	BIT-SET
1 x	Precision magnetic gauge stand
1 x	Boring Bar for CCMT 16mm
2 x	Nylon Fleece Brushes
1 x	Sanding Drums
1 x	Revolving center with replacement lathe centers
1 x	Sanding Discs
1 x	quantum revolving center CM2
1 x	Sanding Drums
1 x	centrically clamping 125mm
1 x	centrically clamping 100mm
1 x	Boring Bar for DCMT 10mm
2 x	Sanding Drums
2 x	Flap Wheels
2 x	Sanding Discs
2 x	Sanding bands 14x13mm
1 x	Turning inserts SCMT09T304
2 x	Tungsten carbide drills Ø1,5mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Broca de alta duração de 0.9mm
1 x	BGA-Bottom-157
1 x	Wood Lathe DB900
1 x	BGA-Bottom-165
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Three piece thread cutting set
1 x	Turning inserts VCMT070204
1 x	Screwdriver bit set. 49-piece.
2 x	Threading inserts 60º
2 x	Diamond Twist Drills
1 x	Fibre-Cut Discs
3 x	Diamond Cutting Discs
1 x	Flexible polishing pad set
2 x	Fibre-Cut Discs
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	TCMT110204
2 x	Metal Cutting Blades
2 x	HSS drill bits 1.0mm
1 x	Flexible polishing pad set
1 x	BGA-Bottom-192
1 x	Lathe System PD 400
3 x	High quality corundum grinding bits
1 x	BGA-Bottom-177
1 x	BGA-Bottom-167
1 x	Diamond Grinding Bits 1mm
2 x	High quality corundum grinding bits
1 x	Insert LGTN-3
1 x	BGA-Bottom-164
1 x	BGA-Bottom-191
1 x	Ball-shaped diamond coated 3.2mm
1 x	Diamond Grinding Bits 5mm
2 x	Milling cutter set (6 - 10mm)
1 x	HSS drill bits 0.8mm
1 x	Tungsten carbide drills Ø2mm
2 x	Fibre-Cut Discs
1 x	BGA-Bottom-153
2 x	DCMT070204
1 x	BGA-Bottom-180
2 x	SCMT09T304
1 x	HSS twist drill set with centring pin
1 x	Five piece HSS chisel set
2 x	HSS drill bits 1.6mm
3 x	Diamond Cutting Discs
2 x	TCMT090204
1 x	Diamond Grinding Bits 1,8mm
1 x	Tungsten carbide cutters set
1 x	BGA-Bottom-19
1 x	Insert LGTN-2
3 x	Diamond Cutting Discs
2 x	Tungsten carbide drills Ø1mm
1 x	Threading inserts 60º
1 x	HSS boring tool set, 6 pieces
1 x	14-piece parallel supports set
2 x	High quality corundum grinding bits
2 x	HSS drill bits 1.2mm
2 x	Fibre-Cut Discs
2 x	SCMT060204
1 x	Diamond Grinding Bits 1,8mm
2 x	High quality corundum grinding bits
3 x	Diamond Cutting Discs
1 x	Turning inserts CCMT060204
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
1 x	BGA-Bottom-16
2 x	Milling cutter set (2 - 5mm)
1 x	BGA-Bottom-171
1 x	Ball-shaped diamond coated 2.2mm
1 x	Fibre-Cut Discs
1 x	Turning inserts WCMX050308F
1 x	Threading inserts 60º
2 x	Replacement carving blades for MSG
1 x	Turning inserts CCMT09T304
1 x	BGA-Bottom-174
2 x	WCMT050308
1 x	Angle cutter 45 °
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	DCGT 070202F-AL
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL8/SOIC8-1 ZIF 170mil
1 x	Insert CCGT060202-AK
1 x	Beeprog2C
1 x	CM2 - B16 - M10
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL8W/SOIC8 ZIF 150mil
1 x	DIL48/SOIC20 ZIF LPC-1
1 x	Multiform grindstone
1 x	DIL3/SOT23-3 ZIF-CS
2 x	Sanding fleece for LWS
1 x	Insert CCGT120404-AK
1 x	Magnetic base
1 x	DIL8/SOIC8 ZIF 200mil
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	lathe tools 12mm
1 x	DIL28W/SOIC28 ZIF 300mil
2 x	SCLCR1010E06
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	DIL32/SOIC32 ZIF 445mil
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Flexible silicon discs
1 x	Polishing Set
1 x	Stainless steel brushes
1 x	HSS twist drill set to DIN 338
1 x	Professional set for finish grinding and polishing
1 x	Flexible silicon discs
2 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Cutting disc, with reinforcement
1 x	HSS cutting blade for OZI
1 x	Diamond-coated cutting disc for MIC
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	Diamond-coated cutting and roughing disc
1 x	Engraving tool GG
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Diamond cutting blade for OZI
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	Stainless steel cups
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Corundum bound cutting disc for LWS
1 x	Super-Cut
1 x	Diamond Coated
1 x	Flap Wheels
1 x	Corundum fan sander for LWS
1 x	Super-fine sanding discs grain 2000
1 x	Bench drill press TBH
1 x	Centre Turning Attachment
1 x	Footswitch FS
1 x	Super safety and specialty bit set, 75-piece
1 x	Backing disc for LWS
2 x	Conjunto de três brocas de ponto
1 x	Router base OFV
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	DIL48/PLCC52 ZIF-CS 68HC05BX
1 x	Wheels brushes
1 x	Tungsten Carbide Tipped (TCT)
1 x	Hot wire cutter THERMOCUT 650
1 x	Replacement glue sticks for HKP 220
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Cups brushes
1 x	Thicknesser DH 40
1 x	broca de alta duração de 0,6mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Chuck for TBM 220
1 x	Independent four jaw chuck for the DB 250
1 x
1 x	Corundum grinding disc for LWS
1 x	Stainless steel wheels
1 x	BGA-Bottom-108
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Corundum grinding disc for LWS
1 x	Corundum sanding discs for LWS
1 x	Brass brushes
1 x	Universal and oil siphoning pump AP 12
1 x	Replacement belts for BSL 220/E
1 x	HSS drill bits 0.5mm
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Super-fine sanding discs grain 000
1 x	Flexible silicon discs
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL48/PLCC84 ZIF 68HC11
1 x	Three-jaw steel drill chuck

€15,989.68