Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	surface planing and thicknessing ADH 250
1 x	Router base OFV
1 x	Broca de ponto 3.15 x 1.25
1 x	Cutting disc, with reinforcement
1 x	Wood Lathe DB900
1 x	BIT-SET
1 x	Fluted filter for CW-matic
1 x	Sanding fleece for LWS
1 x	SCLCR1010E06
1 x	Insert CCGT060202-AK
1 x	V-slot cutter 6.5mm
1 x	Corundum sanding discs for LWS
1 x	Multipurpose Vices Primus100
1 x	surface planing and thicknessing ADH 200
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Three jaw chuck for the lathe DB 250
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Spare cutting wire
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	sanding belts for BBS/s Grit 240
1 x	Insert CCGT120404-AK
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Hand magnifier with LED light 3X
1 x	Slot cutter 3.2mm
1 x	Independent four jaw chuck for the DB 250
1 x	sclcr2525M12
2 x	MICROFLAM gas soldering set MGS
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Diamond-coated cutting and roughing disc
1 x	Slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	sanding belts for BBS/s Grit 80
1 x	Corundum grinding disc for LWS
1 x	Blade holders for DS 460
1 x	Wood Lathe DB450
1 x	10-piece wood router cutter set
2 x	sanding belts for BBS/s Grit 150
1 x	Screwdriver bit set. 49-piece.
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Lathe tools 10mm pastilhados
1 x	Precision steel vice PM 40
2 x	Table Sawr TKS 315 E
1 x	Corundum grinding disc for LWS
1 x	Precision Vice FMS 75
1 x	Angle cutter 45 °
1 x	Chuck for TBM 220
1 x	Combi cutter 6.5/2.5mm
1 x	Warding files set, 6pcs
1 x	6pcs Double Open End wrench set
1 x	Super safety and specialty bit set, 75-piece
1 x	Slot cutter 5.0mm
1 x	Backing disc for LWS
1 x	Universal and oil siphoning pump AP 12
1 x	Corundum fan sander for LWS
1 x	Machine Vice MS 4
1 x	Core box bit 3.2mm
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Corundum fan sander for LWS
1 x	Corundum sanding discs for LWS
1 x	Sanding fleece for LWS
1 x	Vacum SAA 901
1 x	Hot wire cutter THERMOCUT 650
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Flexishaft MICROMOT 110/BF
1 x	Flexishaft MICROMOT 110/P
1 x	Centre Turning Attachment
1 x	Combination pliers 190mm
1 x	Micro Compound Table KT 70
1 x	Protective device for hand-operated MICROMOT
1 x	Conj 5 pinças ESD
1 x	Aluminium Die-Cast
1 x	Plastic magnifying glass
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Side cutters 195mm
1 x	Side cutters 160mm
1 x	MICROMOT tool holder
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Multiform grindstone
1 x	Footswitch FS
1 x	MICROFLAME burner MFB/E
1 x	Universal holder UHZ
1 x	Dividing attachment TA 230 for PF 250
1 x	Combination pliers 210mm
1 x	Table Saw TKS 2500 SC
1 x	Three-jaw steel drill chuck
1 x	Engraving tool GG
1 x	14-piece parallel supports set
1 x	Collet Set for accurate use on round components

€7,860.85