Top » Catalog » ESD Tools » EUROline-Conductive pliers » 3-654-15

€31.24 + VAT

Side cutters EUROline-Conductive
[3-654-15]

SPECIAL ELECTRONIC PLIERS

EUROline-Condutive

Box joint
Double leaf spring
High quality steel
Fine polished and bright burnished
For dazzle-free working, high corrosion protection
Ergonomically formed bicoloured hand-guard from conductive anti-slide material

The pliers of this program have been tested with good results by a well-known electronic group adequate to IEC 61340

With slim, rounded head

Size: 125 mm

Cutting capacity

Copper-wire: 1.5 mm
Soft wire: 1.0 mm
Hard wire: 0.4 mm

Reviews

Customers who bought this product also purchased

EUROline flat nose pliers

EUROline round nose pliers

Super safety and specialty bit set, 75-piece

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
  ESD bracelet and accessories
  ESD Brushes
  ESD Tool set
  ESD workbench pad
  ESD/EGB electronics Screwdrivers->
  ESD/EGB TWEEZERS
  EUROline-Conductive pliers
  Floor cover ESD
  Screwdrivers set ESD
  Severals
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Supercut jig saw blades of special steel
1 x	Jig saw blades made of HSS
1 x	Spare cutting wire
1 x	Crosscut 'Super-Cut' blade
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Solid carbide saw blade
1 x	Saw blade made of high-alloy special steel
1 x	Footswitch FS
1 x	Revolving center with replacement lathe centers
1 x	quantum revolving center CM1
1 x	Tungsten tipped saw blade
1 x	EUROline snipe nose pliers
1 x	quantum revolving center CM2
1 x	Diamond blade
2 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 120
1 x	Micro Compound Table KT 70
1 x	Tungsten carbide cutters set
1 x	Replacement belts for BSL 220/E
1 x	Slot cutter 6.5mm
1 x	Polishing Set
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICRO-screwdrivers
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Grinding mop cylinder grit 80
1 x	Grinding mop cylinder grit 240
1 x	Independent four jaw chuck for the DB 250
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Sanding fleece for LWS
1 x	MICRO Heat gun MH 550
1 x	Router base OFV
1 x	Backing disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Corundum fan sander for LWS
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Edge cutter with pin 6.4mm
1 x	MICROFLAME burner MFB/E
1 x	Slot cutter 3.2mm
1 x	Three piece thread cutting set
1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	EUROline end cutter
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	MICROMOT glue gun HKP 220
1 x	Half round cutter 13mm
1 x	Combi cutter 6.5/2.5mm
1 x	Corundum sanding discs for LWS
1 x	Universal and oil siphoning pump AP 12
1 x	Diamond-coated cutting disc for MIC
1 x	Silicon-Carbide.
1 x	Slot cutter 5.0mm
1 x	Special Fused Alumina (Hardness N).
1 x	Core box bit 3.2mm
1 x	Corundum grinding disc for LWS
1 x	Replacement glue sticks for HKP 220
1 x	Precision lathe PD 250/E
1 x	Angle cutter 45 °
1 x	Five piece HSS chisel set
1 x	Rounding over cutter 6.4mm
1 x	HSS boring tool set, 6 pieces
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	Rebating cutter 6.4mm
1 x	Lathe System PD 400
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	10-piece wood router cutter set
1 x	Universal holder UHZ
1 x	Corundum bound cutting disc for LWS
1 x	Corundum grinding disc for LWS
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Step clamps made of steel
1 x	Complete Engraving Kit with trial glass
1 x	Machine Vice MS 4
1 x	V-slot cutter 6.5mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Blade holders for DS 460
1 x	Engraving tool GG
1 x	Diamond-coated cutting and roughing disc
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Precision steel vice PM 40
1 x	MICROFLAM gas soldering set MGS
1 x	Super safety and specialty bit set, 75-piece
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	4-jaw chuck individually clamping 100mm
1 x	centrically clamping 125mm
1 x	Dial gauge
1 x	Cutter head for copy and surface milling MT3
1 x	3-jaw chuck centrically clamping 100mm
1 x	Polishing felt, medium hard

€5,618.27