Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	EUROline round nose pliers
2 x	Independent four jaw chuck for the DB 250
1 x	Telephone pliers stright 165mm
2 x	MICROMOT drill stand MB 200
2 x	Three jaw chuck for the lathe DB 250
1 x	Footswitch FS
2 x	MICROMOT tool holder
1 x	Precision Vice FMZ
2 x	Protective device for hand-operated MICROMOT
2 x	Flexishaft MICROMOT 110/BF
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	14-piece parallel supports set
1 x	Screwdriver 1.5
1 x	Screwdriver 1.0
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	MICROMOT steel collet set
1 x	EUROline top cutter
1 x	Telephon pliers straight 200mm
1 x	Cross-recess Screwdrivers 1
2 x	Five piece HSS chisel set
1 x	Flat nose pliers 185mm
1 x	Cross-recess Screwdrivers 000
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Telephone pliers stright 205mm
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 000
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Telephone pliers bent 205mm
1 x	Telephone pliers bent 165mm
1 x	EUROline end cutter
2 x	Aluminium Die-Cast
1 x	Precision steel vice PM 40
1 x	Cross-recess Screwdrivers 2
1 x	Telephon pliers bent 160mm
1 x	Telephone pliers straight 205mm
1 x	EUROline side cutter rounded head
1 x	Flat nose pliers 160mm
1 x	EUROline flat nose pliers
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	MICROMOT extension cord. 300cm.
1 x	Screwdriver 1.2
1 x	Cross-recess Screwdrivers 1
1 x	Multipurpose Vices Primus100
1 x	Mill/Drill Unit BFB 2000.
1 x	Screwdriver 0.8
1 x	Cross-recess Screwdrivers 00
1 x	Cross-recess Screwdrivers 1
1 x	Flat nose pliers 165mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Screwdriver 2.5
1 x	Telephon pliers bent 200mm
1 x	Cross-recess Screwdrivers 00
1 x	FREEZER-TOP 200ml
1 x	Sanding Drums
1 x	Cutting tool 10 mm
1 x	Sanding Discs
1 x	Sanding bands 14x13mm
1 x	Corundum fan sander for LWS

€2,265.98