Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Spare cutting wire
Replacement cutting wire for the THERMOCUT 12/E	Hot wire cutter THERMOCUT 12/E	Hot wire cutter THERMOCUT 230/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	HSS immersion saw blades for OZI
1 x	Super-fine sanding discs grain 000
1 x	Super-fine sanding discs grain 400
1 x	Backing disc for LWS
1 x	Replacement belts for BSL 220/E
1 x	Lambswool polishing disc
1 x	Super-fine sanding discs grain 2000
1 x	Microfibre cloth
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Replacement belts for BSL 220/E
2 x	Cylindrical cutters
1 x	Rebating cutter 6.4mm
1 x	Half round cutter 13mm
1 x	Edge cutter with pin 6.4mm
1 x	Combi cutter 6.5/2.5mm
2 x	Slot cutter 6.5mm
2 x	Tungsten carbide cutter 3.0mm
2 x	Core box bit 3.2mm
3 x	Side cutters EUROline-Conductive
1 x	V-slot cutter 6.5mm
2 x	Disc cutters
2 x	Cylinder shaped milling cutters
1 x	Rounding over cutter 6.4mm
2 x	Tungsten carbide cutter 2.0mm
1 x	Angle cutter 45 °
1 x	Slot cutter 5.0mm
2 x	Set of precision cutters
1 x	Cone shaped milling cutter
1 x	Wolfram vanadium steel milling bits
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutter 1.0mm
1 x	Solid carbide stylus for engraving
1 x	Polishing paste
1 x	EUROline-Conductive set of pliers
1 x	Fluted filter for CW-matic
1 x	Special Fused Alumina (Hardness N).
1 x	End side cutters 45º EUROline-Conductive
2 x	Felt polishers
1 x	sandpaper for PS 13 Grit 400
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Silicon-Carbide.
1 x	Polishing Set
1 x	Flexible polishing pad set
2 x	Felt polishers
1 x	Fine dust paper filter for CW-matic
1 x	Flexible polishing pad set
1 x	Round nose pliers 45º EUROline-Conductive
3 x	Cotton polishers
1 x	Felt polishers
1 x	Cotton polishers
1 x	Mini side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Replacement belts for BSL 220/E
2 x	Flexible silicon discs
1 x	Mini side cutters EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	Three-jaw steel drill chuck
2 x	Felt polishers
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Flexible silicon discs
3 x	Cotton polishers
1 x	Earthing module
1 x	Crocodile clip
1 x	Earth wire with dummy Schunko-plug
1 x	Earth wire
1 x	Contact bracelet with spiral cord

€1,183.47