Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->
Torque Screwdriver

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	Replacement glue sticks for HKP 220
1 x	Steel wheels
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Tungsten carbide drills Ø1mm
1 x	HSS drill bits 1.2mm
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Crosscut 'Super-Cut' blade
1 x	HSS drill bits 0.5mm
1 x	Blade for Wood and Plastics
1 x	Blade guides separately
1 x	Diamond-coated cutting disc for MIC
1 x	Tungsten tipped saw blade
1 x	Diamond blade
1 x	Conjunto de três brocas de ponto
1 x	Stainless steel cups
1 x	Spare cutting wire
1 x	Diamond blade for MBS 240/E
1 x	Wheels brushes
1 x	HSS drill bits 0.8mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Cups brushes
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Stainless steel wheels
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Brass brushes
1 x	Tungsten carbide drills Ø1,5mm
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Steel brushes
1 x	Saw blade made of high-alloy special steel
1 x	HSS twist drill set with centring pin
1 x	HSS drill bits 1.0mm
1 x	Stainless steel brushes
1 x	HSS drill bits 1.6mm
1 x	Blade for Steel and brass
2 x	Tungsten carbide cutters set
1 x	Silicon-Carbide.
1 x	Three-jaw steel drill chuck
1 x	MICROMOT tool holder
1 x	Tungsten Carbide Tipped (TCT)
1 x	MICROMOT steel collet set
1 x	Supercut jig saw blades of special steel
1 x	Sanding pads for OZI 220/E grit 80
1 x	Flexishaft MICROMOT 110/BF
1 x	Protective device for hand-operated MICROMOT
1 x	Cutting disc, with reinforcement
1 x	Step clamps made of steel
1 x	Footswitch FS
1 x	MICROMOT extension cord. 300cm.
1 x	Mill/Drill Unit BFB 2000.
1 x	Aluminium Die-Cast
2 x	Machine Vice MS 4
1 x	Polishing Set
1 x	HSS immersion saw blades for OZI
1 x	PLCC Extractor
1 x	PLCC Puller
1 x	14-piece parallel supports set
1 x	Diamond cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 150
1 x	Dividing attachment TA 230 for PF 250
1 x	Flexishaft MICROMOT 110/P
1 x	HSS immersion saw blades for OZI
1 x	Diamond Grinding Bits 1,8mm
1 x	Set of precision cutters
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Tungsten carbide cutter 2.0mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Cone shaped milling cutter
1 x	Disc cutters
1 x	Diamond Cutting Discs
1 x	Ball shaped milling cutters
1 x	Ball-shaped diamond coated 1.2mm
1 x	Diamond Cutting Discs
1 x	Flame shaped milling cutters
1 x	Wolfram vanadium steel milling bits
1 x	Diamond Cutting Discs
1 x	Ball-shaped diamond coated 2.2mm
1 x	Solid carbide stylus for engraving
1 x	Diamond Cutting Discs
1 x	Ball-shaped diamond coated 3.2mm
1 x	Magnetic base
1 x	Cylinder shaped milling cutters
1 x	Cylindrical cutters
1 x	Diamond Grinding Bits 1mm
1 x	Chuck for TBM 220
1 x	Diamond Twist Drills
1 x	Tungsten carbide cutter 3.0mm
1 x	Diamond Grinding Bits 5mm
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Fixed Steady
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Tool holder for rotary tools
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Collet Set for accurate use on round components
1 x	Blade holders for DS 460
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Centre Turning Attachment
1 x	Four Jaw Chuck
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	BeeHive204
1 x	BGA-Bottom-1
1 x	BGA-0245/0242
1 x	BGA-Bottom-125
1 x	BGA-Bottom-105
1 x	BGA-Bottom-118
1 x	BGA-0245/0243
1 x	BGA-Bottom-111
2 x	Precision Vice FMS 75
1 x	BGA-0246/0244
1 x	BGA-Bottom-106
1 x	BGA-Bottom-10
1 x	BGA-Bottom-103
1 x	BGA-Bottom-108
1 x	BeeHive208S
2 x	Multipurpose Vices Primus 75
2 x	Precision Vice FMZ
1 x	Super jig saw STS/E
1 x	Multipurpose Vices Primus100
1 x	2-speed scroll saw DSH
1 x	MICRO cutter MIC
1 x	Thicknesser DH 40
1 x	Motor-driven carving device MSG
1 x	Cut off/mitre saw KGS 80
1 x	Jig saw STS 12/E
1 x	Surface planer AH 80
1 x	MICRO shaper MP 400
1 x	Scroll saw DS 230/E
1 x	Table Saw FET

€18,003.79