€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Cutting disc, with reinforcement
1 x sandpaper for PS 13 Grot 180
1 x Replacement belts for BSL 220/E
1 x Replacement belts for BSL 220/E
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Angle cutter 45 °
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Footswitch FS
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x HSS boring tool set, 6 pieces
1 x 10-piece wood router cutter set
1 x Rebating cutter 6.4mm
1 x Diamond blade for MBS 240/E
1 x Chuck for TBM 220
1 x Micro Compound Table KT 70
1 x Combi cutter 6.5/2.5mm
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Felt cloth polishing disc (100 x 15mm)
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Three piece thread cutting set
1 x Slot cutter 6.5mm
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Spare cutting wire
1 x Edge cutter with pin 6.4mm
1 x Rounding over cutter 6.4mm
1 x Blade for Steel and brass
1 x Silicon-Carbide.
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Polishing Set
1 x Blade guides separately
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Special Fused Alumina (Hardness N).
1 x Band knife of hardened spring band steel (without teeth)
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Half round cutter 13mm
1 x Slot cutter 5.0mm
1 x Side cutters 160mm
1 x Telephon pliers straight 160mm
1 x Wire strippers 160mm
1 x Telephon pliers bent 200mm
1 x Telephon pliers straight 200mm
1 x Coarse-toothed (25 TPI per 25mm)
1 x Flat nose pliers 160mm
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Combination pliers 205mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x Round nose pliers 160mm
1 x Telephon pliers bent 160mm
€1,221.76
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook