Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Lambswool polishing disc
1 x	Replacement carving blades for MSG
1 x	Edge cutter with pin 6.4mm
1 x	Grinding mop cylinder grit 120
1 x	V-slot cutter 6.5mm
1 x	Slot cutter 3.2mm
1 x	Grinding mop cylinder grit 120
1 x	Super-fine sanding discs grain 400
1 x	Grinding mop cylinder grit 240
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Rebating cutter 6.4mm
1 x	sandpaper for PS 13 Grit 240
1 x	Five piece HSS chisel set
1 x	10-piece wood router cutter set
1 x	Super-fine sanding discs grain 000
1 x	sandpaper for PS 13 Grot 180
1 x	Slot cutter 6.5mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Professional polishing sponge
1 x	Independent four jaw chuck for the DB 250
1 x	Core box bit 3.2mm
1 x	sandpaper for PS 13 Grit 400
1 x	Rounding over cutter 6.4mm
1 x	Angle cutter 45 °
1 x	Three jaw chuck for the lathe DB 250
1 x	Professional set for finish grinding and polishing
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Sanding fleece for LWS
1 x	EUROline mini side cutter
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	EUROline side cutter pointed head
1 x	HSS cutting blade for OZI
1 x	Corundum grinding disc for LWS
1 x	Sanding pads for OZI 220/E grit 80
1 x	Fluted filter for CW-matic
1 x	Polishing Set
1 x	Corundum sanding discs for LWS
1 x	Inpection mirror 1-978
1 x	EUROline snipe nose pliers
1 x	Corundum fan sander for LWS
1 x	Collet Set for accurate use on round components
1 x	Tool holder for rotary tools
1 x	HSS immersion saw blades for OZI
1 x	EUROline top cutter
1 x	Centre Turning Attachment
1 x	EUROline side cutter rounded head
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)

€953.59