Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Flap Wheels
1 x	Corundum grinding disc for LWS
1 x
1 x	Diamond-coated cutting and roughing disc
1 x	Diamond-coated cutting disc for MIC
1 x	Independent four jaw chuck for the DB 250
1 x	Three-jaw steel drill chuck
1 x	Corundum fan sander for LWS
1 x	Insulation Resistance Tester MG500
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Replacement carving blades for MSG
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Silicon-Carbide.
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Multiform grindstone
1 x	Polishing Set
1 x	Corundum sanding discs for LWS
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Special Fused Alumina (Hardness N).
1 x	Dividing attachment TA 230 for PF 250
1 x	Corundum fan sander for LWS
1 x	Engraving tool GG
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Replacement glue sticks for HKP 220
1 x	Tungstein carbide rasp - and cutting disc
1 x	Three jaw chuck for the lathe DB 250
1 x	Chuck for TBM 220
1 x	Step clamps made of steel
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Pensander PS 13
1 x	Crimping plier for BNC
1 x	Centre Turning Attachment
1 x	Insulation Resistance Tester MG125
1 x	Backing disc for LWS
1 x	Sanding fleece for LWS
1 x	Router base OFV
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Corundum bound cutting disc for LWS
1 x	Sanding fleece for LWS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Collet Set for accurate use on round components
1 x	IC Test clip 20 pins
1 x	Safety insulated screwdrivers 14-606 VDE

€1,886.86