€295.00 + VAT

Insulation Resistance Tester MG500
[MG500]

Insulation Resistance Tester MG500

Allows you to measure insulation resistance more safely by avoiding operation mistakes!!

Hot-line state detection
In any range (MΩ), the hot-line state (30 V minimum) can be detected through the buzzer sound and the red LED illumination. If you press the MEASURE button by mistake in this state, no test voltage will be generated. Thus, the measuring circuit and the equipment involved will not be affected adversely.

Large bolt mark
During the measurement of MΩ, a large bolt mark is illuminated on the LCD with the buzzer sound, allowing you to find that voltage is generated.

More ingenuity
To select the highest test voltage range, you need to turn the rotary switch while holding down the 0Ω ADJ button. This design feature prevents the highest test voltage from being generated by an operation mistake.

Easy to use & tough body
An easy-to-hold body with a portrait design has been adopted to ensure stable measurements. The tester comes with a strap, and uses less slippery elastomeric material for its lateral sides so that the user can grip the tester more firmly.

Automatic data hold
After measurements have been finished, the last measured value can be held automatically. Unlike an analog tester, you do not need to check the reading during measurements and therefore can comfortably concentrate on the object under measurement.

Bargraph just like analog meter
A large logarithmic bar graph is provided to enable the user to check the measured value like using an analog tester.

Large display with backlight
The backlight allows you to check the measured value even in a dark place. Since the rated voltage output can be checked with the green LED, you can find whether the measurement is being carried out properly.

General Specification

MG500 


Reviews
Manufacturers
2 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Morse taper MT2 - B16
2 x MICRO-screwdrivers
1 x 14-piece parallel supports set
2 x Router base OFV
1 x Table Saw FET
1 x MICROFLAM gas soldering set MGS
1 x Dividing attachment TA 230 for PF 250
2 x MICROFLAME burner MFB/E
2 x Engraving tool GG
1 x Protective device for hand-operated MICROMOT
1 x Micro Compound Table KT 70
2 x Universal holder UHZ
1 x ESD Tweezers 5-193
1 x EUROline-Conductive set of pliers
1 x Three-jaw steel drill chuck
1 x Super jig saw STS/E
1 x EUROline end cutter
1 x Flexishaft MICROMOT 110/BF
1 x Bench Circular Saw KS 230
1 x Mill/Drill Unit BFB 2000.
1 x TU 1503V
2 x MICRO Heat gun MH 550
2 x MICROMOT glue gun HKP 220
2 x Compact workshop vacuum cleaner CW-matic
1 x Floor cover ESD
1 x ESD Tweezers 5-191
1 x Contact bracelet with spiral cord
1 x sandpaper for PS 13 Grit 240
1 x MICROMOT drill stand MB 200
2 x Conj 5 pinças ESD
1 x sandpaper for PS 13 Grot 180
2 x Complete Engraving Kit with trial glass
1 x Surface planer AH 80
1 x Jig saw STS 12/E
1 x ESD Brushe
1 x Cut off/mitre saw KGS 80
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x MICRO cutter MIC
1 x MICROMOT steel collet set
1 x Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x Scroll saw DS 230/E
1 x Collet chuck ER32 for D250X550
1 x Follow rest for D250X550
1 x Steady rest for D250X550
1 x machine base with shelves for D250X550
1 x Screwdriver bit set. 49-piece.
1 x DIL8/SOT23-6 ZIF-CS PIC
1 x IC tweezers
1 x Face clamping disc for D250X550
1 x Earth wire
2 x Universal and oil siphoning pump AP 12
1 x Lathe chuck flange for D250X550
1 x Collet chuck ER25 for D250X550
1 x Quick-action tool holder kit SWH AA
1 x BeeProg2
1 x DIL40/TQFP44-1 ZIF MCS51
€7,403.19
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
SANWA-METER
SANWA-METER Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook