Top » Catalog » Optimum » 3420310

€1,400.00 + VAT

TU 2004V
[3420310]

Convincing arguments: quality, efficiency and price

  • Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
  • Main spindle hardened and bedded in readjustable precision taper roller bearings
  • Hardened spindle nose (DIN 6350)
  • The tailstock may be shifted +/- 2.5 mm for taper turning
  • Wide threading range due to change gear kit
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Induction-hardened and ground prismatic bed made from cast iron
  • All guideways adjustable without clearance due to adjustable gibs
  • Powerful, maintenance-free motor
  • Right and left hand motion with zero adjustment
  • Manufactured to DIN 8606 (toolmaker´s precision)
  • Cost-efficient, precise and of stable value
     

  • Main spindle hardened and bedded in adjustable precision taper roller bearings
  • Taper roller bearings in P5 quality
  • Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
  • Change gear mechanism
  • Continuous speed control

  • Precision-machined slide
  • Handwheels with adjustable precision scaling
  • Quadruple tool holder
  • All guideways adjustable without clearance due to adjustable gibs
  • Rolled trapezoid spindle


  • Tailstock adjustable for taper turning
  • Tailstock sleeve and handwheel with adjustable precision scaling


  • Induction-hardened solid prismatic bed

 

Extent of supply:

  • 3-jaw chuck Ø 80 mm
  • Steady centre MT 2
  • Steady centre MT 3
  • Lathe chuck protection
  • Rear splash guard
  • Chip pan
  • Quadruple tool holder
  • Operating tools
  • Change gear kit

Technical data 
Motor power 600 W 230 V ~50 Hz
Center height 100 mm
Center width 300 mm
Turning diameter (max.) 200 mm
Ø circulation via slide 110 mm
Spindle speed 150 - 2,500 rpm
Number of steps 2 steps
Spindle taper  MT 3
Spindle hole 21 mm
Passage 3-jaw chuck 20 mm 
Bed width 100 mm
Top slide - travel 55 mm
Compound slide - travel 75 mm
Tailstock taper MT 2
Tailstock sleeve travel 65 mm
Longitudinal feed 0.1/0.2 mm/rev
Pitch - Metric (11) 0.5 - 3 mm/rev
Pitch - Inch (8) 44 - 10 threads/1“
Quadruple tool holder Seat height . 12 mm
Dimensions (L x W x H) 830 x 396 x 355 mm
Net weight 55 kg

 

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x High quality corundum grinding bits
2 x High quality corundum grinding bits
2 x High quality corundum grinding bits
2 x ACCENT SERVICE TOOLS SET
2 x High quality corundum grinding bits
2 x High quality corundum grinding bits
2 x High quality corundum grinding bits
1 x Wrench Keys 0.9
1 x Wrench Keys 1.3
1 x Polishing Set
1 x Wrench Keys 0.7
1 x Socket Wrenches 2.0
1 x Grinding and Polishing Machine SP/E
1 x Socket Wrenches 1.5
1 x Socket Wrenches 3.5
1 x Socket Wrenches 3.0
1 x Socket Wrenches 4.0
1 x Socket Wrenches 4.5
1 x Socket Wrenches 2.5
1 x Socket Wrenches 5.5
1 x Socket Wrenches 3.2
1 x Wrench Keys 1.5
1 x Socket Wrenches 5.0
1 x Saw blade made of high-alloy special steel
2 x Sanding Drums
2 x Sanding Drums
2 x Sanding Discs
2 x Sanding Drums
2 x Sanding Drums
2 x Sanding bands 14x13mm
3 x Inspector mirror
2 x Hand magnifier with LED light 3X
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x Inpection mirror 1-978
2 x Plastic magnifying glass
2 x PRECISION WIRE STRIPPER ESD-PLUS
2 x Mini side cutters EUROline-Conductive
3 x Mini side cutters EUROline-Conductive
1 x Crimping plier for BNC
2 x IC tweezers
2 x Hand Magnifier 2-293
1 x EUROline-Conductive set of pliers
1 x Earth wire with dummy Schunko-plug
2 x Precision caliper square
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x Round nose pliers 45º EUROline-Conductive
3 x PLCC Extractor
1 x Crocodile clip
1 x End side cutters EUROline-Conductive
1 x Glass fibre contact cleaner brush
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Floor cover ESD
4 x magnifier 3.25 x Ø 45mm with additional lens
1 x Earth wire
1 x Earthing module
1 x Earth wire
2 x Flat nose pliers 45º EUROline-Conductive
1 x Glass fibre contact cleaner brush
1 x MICRO-screwdrivers
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Screwdriver 1.5
1 x Surface planer AH 80
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Cross-recess Screwdrivers 2
3 x Ball-shaped diamond coated 2.2mm
1 x BIT-SET
1 x Cross-recess Screwdrivers 2
1 x ESD-handling ser 9-361
1 x Screwdriver 2.0
4 x Milling cutter set (2 - 5mm)
1 x Screwdriver 1.8
1 x Precision steel vice PM 40
1 x ESD-handling set
2 x Broca de alta duração de 2.7mm
1 x Screwdriver 1.2
1 x Cross-recess Screwdrivers 00
1 x Cross-recess Screwdrivers 000
2 x Broca de alta duração de 3.0mm
2 x Broca de alta duração de 2.6mm
3 x Diamond Grinding Bits 1,8mm
2 x Broca de alta duração de 2.8mm
1 x Cross-recess Screwdrivers 1
2 x 10-piece wood router cutter set
1 x Screwdriver 0.8
1 x Micro Compound Table KT 70
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Cross-recess Screwdrivers 0
1 x Cross-recess Screwdrivers 1
1 x Snipe nose pliers 45º EUROline-Conductive
1 x surface planing and thicknessing ADH 250
1 x MICROMOT Mains Adapter NG 5/E
2 x MICROMOT drill stand MB 200
4 x Replacement glue sticks for HKP 220
2 x Broca de alta duração de 0.4mm
2 x DIL48/TSOP56 ZIF 18.4mm Flash-3
3 x Diamond Cutting Discs
1 x IC Test clip 20 pins
1 x MICRO Band Saw MBS 240/E
1 x Blade holders for DS 460
1 x Broca de ponto 5.00 x 2.00
2 x Broca de alta duração de 1.1mm
2 x Diamond Grinding Bits 5mm
1 x Drill chuck with sliding sleeve for the tailstock
1 x DIL8/SOIC8 ZIF 150mil
2 x Corundum sanding discs for LWS
2 x Broca de alta duração de 2.0mm
2 x 14-piece parallel supports set
1 x Broca de alta duração de 1.5mm
1 x Broca de alta duração de 1.2mm
2 x Broca de alta duração de 2.5mm
2 x Broca de alta duração de 1.4mm
1 x Broca de alta duração de 2.2mm
1 x Broca de alta duração de 1.3mm
2 x Pensander PS 13
1 x Broca de alta duração de 2.1mm
3 x Broca de alta duração de 0.5mm
1 x Broca de alta duração de 2.3mm
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x Broca de alta duração de 0.7mm
1 x Broca de alta duração de 0.3mm
1 x Machine Vice MS 4
2 x Broca de alta duração de 2.4mm
1 x Broca de alta duração de 0.9mm
1 x broca de alta duração de 0,6mm
1 x broca de alta duração de 0,2mm
1 x Broca de alta duração de 0.8mm
2 x Broca de alta duração de 1.0mm
1 x Bandsaw blade of bimetal for MBS 240/E
1 x HSS drill bits 1.2mm
2 x Diamond Twist Drills
1 x Diamond Grinding Bits 1,8mm
1 x Ball-shaped diamond coated 1.2mm
1 x Metal Cutting Blades
2 x Diamond-coated cutting disc for MIC
1 x Aluminium Die-Cast
1 x Diamond Grinding Bits 1mm
1 x Tungsten carbide drills Ø1mm
1 x DIL48/TSOP48 ZIF 15.4mm
1 x High quality corundum grinding bits
1 x Screwdriver bit set. 49-piece.
2 x Diamond Cutting Discs
2 x Diamond Cutting Discs
1 x HSS drill bits 1.0mm
1 x Nylon Fleece Brushes
1 x Tungsten carbide drills Ø1,5mm
1 x Grinding mop cylinder grit 120
1 x Sanding Discs
1 x HSS drill bits 0.8mm
1 x Tungsten carbide drills Ø2mm
1 x HSS drill bits 0.5mm
1 x HSS drill bits 1.6mm
1 x Three piece thread cutting set
1 x Ball-shaped diamond coated 3.2mm
1 x Flap Wheels
1 x Angle polisher WP/E
2 x Diamond Cutting Discs
1 x Fibre-Cut Discs
1 x MICROMOT steel collet set
1 x Replacement carving blades for MSG
3 x MICRO woodturning lathe DB 250
1 x HSS twist drill set with centring pin
4 x Tungsten carbide cutters set
1 x Flexible polishing pad set
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Fibre-Cut Discs
2 x DIL24/QSOP24 ZIF 150mil
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x DIL48/TQFP64-2 ZIF ST7-1
1 x Flexible polishing pad set
1 x MICRO cutter MIC
1 x DIL40/VQFP64 ZIF AWM-1
1 x Five piece HSS chisel set
1 x Fibre-Cut Discs
1 x HSS boring tool set, 6 pieces
1 x Fibre-Cut Discs
1 x DIL44/MLF44-1 ZIF-CS
1 x Fibre-Cut Discs
1 x High quality corundum grinding bits
2 x Bottom PSOP44 NOR-3
1 x Mill/Drill Unit BFB 2000.
1 x Wolfram vanadium steel milling bits
1 x Sanding bands 14x13mm
1 x Fibre-Cut Discs
1 x Replacement belts for BSL 220/E
1 x HSS twist drill set to DIN 338
1 x Protective device for hand-operated MICROMOT
1 x Replacement belts for BSL 220/E
1 x Collet Set for accurate use on round components
1 x Wolfram vanadium steel milling bits
1 x Felt polishers
1 x Replacement belts for BSL 220/E
1 x Super-Cut
1 x Backing disc for LWS
1 x Corundum fan sander for LWS
1 x Bench drill press TBH
1 x Super-fine sanding discs grain 400
1 x Corundum grinding disc for LWS
3 x Milling cutter set (6 - 10mm)
1 x Flap Wheels
1 x Replacement cutting disc for MICRO cutter MIC
1 x Flexible silicon discs
1 x Conjunto de três brocas de ponto
2 x End milling cutter kit HSS 12 pcs
1 x Corundum fan sander for LWS
3 x End milling cutter kit HSS 20 pcs
1 x Hot wire cutter THERMOCUT 650
1 x Super-fine sanding discs grain 000
1 x Super-fine sanding discs grain 2000
1 x Corundum bound cutting disc for LWS
1 x Tungsten Carbide Tipped (TCT)
1 x Diamond cutting blade for OZI
1 x Diamond-coated cutting and roughing disc
1 x Diamond Coated
1 x Flexible silicon discs
1 x Professional set for finish grinding and polishing
1 x Hot wire cutter THERMOCUT 12/E
1 x Sanding fleece for LWS
1 x Corundum grinding disc for LWS
1 x Corundum sanding discs for LWS
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Lambswool polishing disc
1 x Cutting disc, with reinforcement
1 x Tungsten tipped saw blade
1 x Supercut jig saw blades of special steel
1 x HSS cutting blade for OZI
1 x DIL48/TQFP144 ZIF ST10-1
1 x Super safety and specialty bit set, 75-piece
1 x Sanding fleece for LWS
2 x Turning inserts WCMX050308F
1 x precision machine vices FMS125
1 x TCMT090204
1 x TCMT110204
1 x SCMT09T304
1 x SCMT060204
1 x WCMT050308
1 x Turning inserts SCMT09T304
1 x precision machine vices FMS200
1 x Threading inserts 60º
2 x DIL40/TQFP44 ZIF AWM-1
1 x quantum revolving center CM2
1 x RT150 - Horizontal-vertical circular dividing table
2 x Turning inserts VCMT070204
1 x Threading inserts 60º
1 x DIL24/TSSOP24 ZIF 170mil
1 x DIL48/TQFP64-2 ZIF HC908-2
€13,022.73
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Grinding mop cylinder grit 120
Grinding mop cylinder grit 120
€8.33
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online