€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	HSS immersion saw blades for OZI
1 x	Sanding pads for OZI 220/E grit 150
1 x	Multiform grindstone
1 x	Sanding pads for OZI 220/E grit 80
1 x	Belt sander BS/E
2 x	Three piece thread cutting set
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Three jaw chuck for the lathe DB 250
3 x	Five piece HSS chisel set
1 x	sanding belts for BBS/s Grit 240
1 x	Independent four jaw chuck for the DB 250
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	HSS boring tool set, 6 pieces
1 x	Corundum grinding disc for LWS
1 x	Combi cutter 6.5/2.5mm
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Core box bit 3.2mm
1 x	Slot cutter 3.2mm
1 x	Cutting disc, with reinforcement
1 x	Crosscut 'Super-Cut' blade
1 x	Corundum fan sander for LWS
2 x	Replacement glue sticks for HKP 220
1 x	Angle cutter 45 °
2 x	Corundum sanding discs for LWS
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Cotton polishers
1 x	Cut off/mitre saw KGS 80
1 x	Cylinder shaped milling cutters
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Slot cutter 6.5mm
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Rounding over cutter 6.4mm
1 x	Cylinder sander WAS/E
1 x	V-slot cutter 6.5mm
1 x	Lathe System PD 400
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cotton polishers
2 x	Corundum grinding disc for LWS
1 x	Precision lathe PD 250/E
1 x	Conjunto de três brocas de ponto
1 x	Replacement belts for BSL 220/E
1 x	High quality corundum grinding bits
1 x	Backing disc for LWS
1 x	TIP SPT-3
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Sanding bands 14x13mm
1 x	Universal and oil siphoning pump AP 12
1 x	Milling cutter set (6 - 10mm)
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Engraving tool GG
1 x	Three-jaw steel drill chuck
1 x	Corundum fan sander for LWS
1 x	Sanding Drums
1 x	Replacement belts for BSL 220/E
1 x	Protective device for hand-operated MICROMOT
1 x	Fibre-Cut Discs
1 x	Replacement belts for BSL 220/E
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Dividing attachment TA 230 for PF 250
1 x	Plastic magnifying glass
1 x	Hot wire cutter THERMOCUT 650
1 x	Diamond Cutting Discs
1 x	Diamond-coated cutting and roughing disc
1 x	TIP SPT-9
1 x	Tungsten carbide cutters set
1 x	TIP SPT-6
1 x	MICROMOT drill stand MB 200
1 x	TIP SPT-4
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Professional set for finish grinding and polishing
1 x	High quality corundum grinding bits
1 x	Mill/Drill Unit BFB 2000.
1 x	High quality corundum grinding bits
1 x	Collet Set for accurate use on round components

€5,298.39