€73.98 + VAT

MICRO Screwdriver MIS 1. Complete with 16 inserts.
[28690]

MICRO Screwdriver MIS 1. Complete with 16 inserts.

With torque adjustable from 0.35 - 2.0 Nm. Quiet, light and with sensitive clutch. Used in electronic assembly lines, machine assembly and by model builders and clock makers.

The three stage planetary gearbox offers a reduction ration of 93:1, yielding the ideal speed of 200 - 250 rpm (depending on mains adapter used). The clutch is adjustable in the range 0.35 to 1.0 Nm in 5 steps. Tightening torques can be selected precisely. The six stage bypasses the clutch and yields approx. 2 Nm. An ideally positioned rocker switch provides on/off/reverse. Fibreglass reinforced NYLON lends high impact resistance to the housing. A Roehm chuck facilitates acceptance of all bit shanks, including 6 mm and 1/4". A 160 cm flexible cord ensures perfect mobility. The rear mounted metal hook is used with the optional balancer.

Available as a complete set, with plastic case and 16 bits (Chrome Molybdenum Steel). Weight 375 g. Overall length: 150 mm. Supplied in durable plastic case with 16 bits. We recommend the use of MICROMOT mains adapters (1.0 A, 12 V) with or without speed control

Note for industrial use:
At torques below 2.0 Nm, the MIS 1 powered screwdriver is superior to tools powered by compressed air. And not only because of low energy costs. It works quietly and is cleaner (no lubricated compressed air escapes into the working place). And its highly flexible spiral cable makes the unit comfortable to use.

Reviews

Customers who bought this product also purchased

MICROMOT Mains Adapter NG 5/E

Super-Cut

Shopping Cart

3 x	MICROMOT Mains Adapter NG 5/E
3 x	Precision steel vice PM 40
3 x	MICROMOT Mains Adapter NG 2/S
3 x	Gear Chuck
3 x	MICRO Miller FF 230
3 x	Bench drill machine TBM 220
3 x	Long neck straight drill/grinder LB/E
1 x	Corundum sanding discs for LWS
3 x	Professional Drill/Grinder IBS/E
1 x	Hot wire cutter THERMOCUT 650
3 x	Long neck angle milling/drilling unit LWB 220/E
3 x	Collet Set for accurate use on round components
3 x	MICRO Miller FF 500
3 x	Four Jaw Chuck
1 x	MICROFLAM gas soldering set MGS
2 x	Replacement cutting wire for the THERMOCUT 12/E
4 x	Centre Turning Attachment
3 x	MICRO Miller MF 70
1 x	Multiform grindstone
1 x	Machine Vice MS 4
1 x	Multipurpose Vices Primus100
2 x	Bench drill press TBH
2 x	Tungsten Carbide Tipped (TCT)
2 x	Mill/Drill System BFW 40/E
2 x	MICROMOT 50/EF
1 x	Precision Vice FMZ
3 x	Diamond Coated
3 x	Delta sander OZI/E
3 x	Pensander PS 13
3 x	Disc Sander TG 250/E
2 x	MICROMOT 50
1 x	Multipurpose Vices Primus 75
2 x	Long neck angle grinder LHW
1 x	Tool holder for rotary tools
2 x	Precision Drill/Grinder FBS 240/E
3 x	Belt sander BBS/S
1 x	MICROMOT 230/E
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Replacement carving blades for MSG
2 x	Polishing machine PM 100
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Chuck for TBM 220
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Blade holders for DS 460
2 x	Disc Sander TG 125/E
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Super-Cut
1 x	Blade for Wood and Plastics
2 x	Combi cutter 6.5/2.5mm
2 x	Cone shaped milling cutter
2 x	Brass brushes
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	sanding belts for BBS/s Grit 240
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Blade guides separately
1 x	sanding belts for BBS/s Grit 80
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Grinding and Polishing Machine SP/E
1 x	Diamond-coated cutting and roughing disc
1 x	Slot cutter 3.2mm
3 x	Diamond Twist Drills
2 x	Diamond Cutting Discs
1 x	Grinding mop cylinder grit 120
1 x	14-piece parallel supports set
2 x	Diamond Cutting Discs
2 x	Diamond Grinding Bits 1,8mm
1 x	Slot cutter 6.5mm
1 x	Rounding over cutter 6.4mm
2 x	Edge cutter with pin 6.4mm
2 x	Diamond Grinding Bits 1mm
1 x	Diamond-coated cutting disc for MIC
2 x	HSS drill bits 1.6mm
2 x	Half round cutter 13mm
2 x	Tungsten carbide drills Ø1,5mm
1 x	Screwdriver bit set. 49-piece.
2 x	Diamond Grinding Bits 1,8mm
1 x	Grinding mop cylinder grit 120
1 x	Metal Cutting Blades
2 x	HSS drill bits 0.8mm
1 x	Footswitch FS
2 x	Diamond Grinding Bits 5mm
2 x	High quality corundum grinding bits
2 x	High quality corundum grinding bits
1 x	Slot cutter 5.0mm
2 x	Tungsten carbide drills Ø2mm
2 x	Sanding pads for OZI 220/E grit 80
1 x	10-piece wood router cutter set
2 x	High quality corundum grinding bits
2 x	HSS drill bits 1.2mm
1 x	Flexishaft MICROMOT 110/BF
1 x	Flexible polishing pad set
1 x	Sanding Discs
1 x	Flexishaft MICROMOT 110/P
1 x	Diamond blade for MBS 240/E
1 x	Nylon Fleece Brushes
1 x	Sanding Drums
1 x	Flexible polishing pad set
2 x	Diamond Cutting Discs
2 x	Tungsten carbide drills Ø1mm
2 x	Disc cutters
2 x	Cylindrical cutters
1 x	Flap Wheels
1 x	Core box bit 3.2mm
1 x	Diamond blade
1 x	Fluted filter for CW-matic
1 x	Grinding mop cylinder grit 240
2 x	HSS immersion saw blades for OZI
1 x	Sanding Drums
1 x	Flexible silicon discs
2 x	HSS drill bits 1.0mm
1 x	Flexible silicon discs
1 x	Sanding bands 14x13mm
1 x	Angle cutter 45 °
2 x	Diamond Cutting Discs
1 x	V-slot cutter 6.5mm
1 x	Flexible silicon discs
2 x	HSS drill bits 0.5mm
1 x	Three piece thread cutting set
1 x	Rebating cutter 6.4mm
1 x	Grinding mop cylinder grit 80
1 x	Cylinder shaped milling cutters
1 x	Set of special steel cutters
1 x	Ball shaped milling cutters
1 x	Tungsten carbide cutter 2.0mm
1 x	Wolfram vanadium steel milling bits
1 x	Set of precision cutters
2 x	Flame shaped milling cutters
1 x	Stainless steel wheels
1 x	Tungsten carbide cutters set
1 x	Solid carbide stylus for engraving
1 x	Milling cutter set (6 - 10mm)
1 x	Tungsten carbide cutter 1.0mm
1 x	Steel cups
1 x	Milling cutter set (2 - 5mm)
1 x	Stainless steel cups
1 x	Cups brushes
1 x	Stainless steel brushes
1 x	Steel brushes
1 x	Solid carbide stylus for engraving
1 x	Tungsten carbide cutter 3.0mm
1 x	Wolfram vanadium steel milling bits
1 x	Wheels brushes
1 x	Steel wheels
1 x	HSS twist drill set with centring pin
1 x	Fibre-Cut Discs
1 x	Conjunto de três brocas de ponto
1 x	Sanding pads for OZI 220/E grit 240
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	HSS cutting blade for OZI
1 x	Fibre-Cut Discs
2 x	Engraving tool GG
1 x	High quality corundum grinding bits
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Felt polishers
1 x	Felt polishers
1 x	Fine dust paper filter for CW-matic
1 x	Fibre-Cut Discs
3 x	Dividing attachment TA 230 for PF 250
1 x	HSS immersion saw blades for OZI
1 x	High quality corundum grinding bits
1 x	Fibre-Cut Discs
1 x	Flap Wheels
1 x	Fixed Steady
1 x	High quality corundum grinding bits
1 x	HSS twist drill set to DIN 338
1 x	Fibre-Cut Discs
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	High quality corundum grinding bits
1 x	Ball-shaped diamond coated 3.2mm
1 x	Sanding pads for OZI 220/E grit 150
1 x	Three jaw chuck for the lathe DB 250
1 x	Felt polishers
1 x	Independent four jaw chuck for the DB 250
1 x	Ball-shaped diamond coated 1.2mm
1 x
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Diamond cutting blade for OZI
1 x	Felt polishers
1 x	Replacement glue sticks for HKP 220
1 x	High quality corundum grinding bits
1 x	Three-jaw steel drill chuck
1 x	Ball-shaped diamond coated 2.2mm
1 x	Step clamps made of steel
1 x	Fibre-Cut Discs
1 x	Router base OFV

€19,242.07