€73.98 + VAT

MICRO Screwdriver MIS 1. Complete with 16 inserts.
[28690]

MICRO Screwdriver MIS 1. Complete with 16 inserts.

With torque adjustable from 0.35 - 2.0 Nm. Quiet, light and with sensitive clutch. Used in electronic assembly lines, machine assembly and by model builders and clock makers.

The three stage planetary gearbox offers a reduction ration of 93:1, yielding the ideal speed of 200 - 250 rpm (depending on mains adapter used). The clutch is adjustable in the range 0.35 to 1.0 Nm in 5 steps. Tightening torques can be selected precisely. The six stage bypasses the clutch and yields approx. 2 Nm. An ideally positioned rocker switch provides on/off/reverse. Fibreglass reinforced NYLON lends high impact resistance to the housing. A Roehm chuck facilitates acceptance of all bit shanks, including 6 mm and 1/4". A 160 cm flexible cord ensures perfect mobility. The rear mounted metal hook is used with the optional balancer.

Available as a complete set, with plastic case and 16 bits (Chrome Molybdenum Steel). Weight 375 g. Overall length: 150 mm. Supplied in durable plastic case with 16 bits. We recommend the use of MICROMOT mains adapters (1.0 A, 12 V) with or without speed control

Note for industrial use:
At torques below 2.0 Nm, the MIS 1 powered screwdriver is superior to tools powered by compressed air. And not only because of low energy costs. It works quietly and is cleaner (no lubricated compressed air escapes into the working place). And its highly flexible spiral cable makes the unit comfortable to use.

Reviews

Customers who bought this product also purchased

MICROMOT Mains Adapter NG 5/E

Super-Cut

Shopping Cart

3 x	Step clamps made of steel
3 x	Tungsten tipped saw blade
1 x	Polishing machine PM 100
2 x	MICRO shaper MP 400
2 x	Disc Sander TG 250/E
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Belt sander BBS/S
3 x	2-speed scroll saw DSH
3 x	Bench Circular Saw KS 230
1 x	Belt sander BS/E
2 x	Motor-driven carving device MSG
2 x	Disc Sander TG 125/E
1 x	Pensander PS 13
3 x	Engraving tool GG
2 x	Surface planer AH 80
3 x	Grinding mop cylinder grit 120
3 x	Grinding mop cylinder grit 240
3 x	Grinding mop cylinder grit 120
3 x	Thicknesser DH 40
2 x	Slot cutter 6.5mm
4 x	Grinding mop cylinder grit 80
2 x	Diamond blade
2 x	Four Jaw Chuck
2 x	Angle cutter 45 °
3 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Cut off/mitre saw KGS 80
1 x	Rounding over cutter 6.4mm
2 x	Half round cutter 13mm
3 x	Compact workshop vacuum cleaner CW-matic
1 x	Long neck angle grinder LHW
2 x	MICRO Heat gun MH 550
2 x	Combi cutter 6.5/2.5mm
2 x	MICROFLAM gas soldering set MGS
2 x	Rebating cutter 6.4mm
1 x	Delta sander OZI/E
2 x	V-slot cutter 6.5mm
2 x	MICROFLAME burner MFB/E
2 x	Saw blade made of high-alloy special steel
2 x	Gear Chuck
2 x	Router base OFV
1 x	Angle polisher WP/E
1 x	Universal holder UHZ
2 x	Universal and oil siphoning pump AP 12
3 x	Super safety and specialty bit set, 75-piece
1 x	Complete Engraving Kit with trial glass
1 x	Three piece thread cutting set
1 x	Edge cutter with pin 6.4mm
3 x	Fluted filter for CW-matic
2 x	Corundum sanding discs for LWS
4 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Slot cutter 5.0mm
2 x	Corundum fan sander for LWS
1 x	HSS boring tool set, 6 pieces
2 x	Fine dust paper filter for CW-matic
1 x	Sanding fleece for LWS
1 x	Sanding fleece for LWS
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Corundum sanding discs for LWS
1 x	Corundum grinding disc for LWS
2 x	Blade holders for DS 460
1 x	Backing disc for LWS
1 x	Tungsten carbide cutters set
2 x	Corundum fan sander for LWS
1 x	Slot cutter 3.2mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Core box bit 3.2mm
2 x	Coarse-toothed (25 TPI per 25mm)
1 x	Machine Vice MS 4
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	10-piece wood router cutter set
3 x	Tungsten Carbide Tipped (TCT)
1 x	Precision steel vice PM 40
1 x	Cutting tools of high quality cobalt HSS steel, ground
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	MICRO Miller FF 500
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Cutter head for copy and surface milling MT2
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Replacement cutting disc for MICRO cutter MIC
2 x	Diamond-coated cutting disc for MIC
2 x	Blade for Wood and Plastics
1 x	Polishing Set
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	sandpaper for PS 13 Grot 180
2 x	Blade guides separately
2 x	Bandsaw blade of bimetal for MBS 240/E
2 x	sanding belts for BBS/s Grit 240
1 x	Jig saw blades made of HSS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	sandpaper for PS 13 Grit 240
1 x	Silicon-Carbide.
1 x	sandpaper for PS 13 Grit 400
1 x	Special Fused Alumina (Hardness N).
2 x	sanding belts for BBS/s Grit 80
3 x	Lambswool polishing disc
2 x	Professional polishing sponge
1 x	Flexible silicon discs
1 x	High quality corundum grinding bits
1 x	Microfibre cloth
1 x	Conjunto de três brocas de ponto
1 x	Super-fine sanding discs grain 2000
1 x	Flexishaft MICROMOT 110/BF
1 x	Super-fine sanding discs grain 000
1 x	BGA-Top-5 ZIF-CS
1 x	Corundum grinding disc for LWS
1 x	Diamond Coated
1 x	Flexishaft MICROMOT 110/P
1 x	Flexible silicon discs
2 x	Professional set for finish grinding and polishing
1 x	Footswitch FS
1 x	Super-Cut
1 x	Polishing felt, medium hard

€13,287.14