Top » Catalog » PROXXON » 28512

€29.67 + VAT

MICROMOT 50/EF
[28512]

MICROMOT 50/EF

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design.  The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/EF

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Manufacturers
1 x Grinding mop cylinder grit 120
1 x 6-piece TORX-screwdriver-set
1 x 6-piece screwdriver and cross-recess set
1 x Bench drill press TBH
1 x 6-piece screwdriver and cross-recess set
2 x DIL44/TSOP44-II ZIF 400mil
2 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Steel brushes
1 x Angle cutter 45 °
1 x Tungsten carbide cutter 2.0mm
1 x Cylindrical cutters
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
2 x Top PSOP44 ZIF 600mil
3 x Bottom PSOP44 NOR-3
1 x Footswitch FS
2 x DIL48/TSOP48 ZIF 15.4mm
2 x Fibre-Cut Discs
1 x Tungsten carbide cutters set
2 x DIL40/TSOP40 ZIF 18.4mm
2 x DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x DIL32/TSOP32 ZIF 18.4mm Flash
2 x DIL32/TSOP32 ZIF 12.4mm Flash
1 x BeeProg2
1 x Solid carbide stylus for engraving
1 x Wolfram vanadium steel milling bits
2 x DIL48/TSOP56 ZIF 18.4mm Flash-2
2 x DIL48/TSOP48 ZIF 18.4mm
1 x Replacement carving blades for MSG
2 x Three-jaw steel drill chuck
1 x Ball shaped milling cutters
2 x DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x Bottom PSOP44 NOR-2
1 x Disc cutters
1 x DIL20W/PLCC20 ZIF
1 x HSS cutting blade for OZI
1 x Bench Circular Saw KS 230
1 x BGA-Bottom-148
1 x BGA-0245/0242
1 x DIL40/PLCC52 ZIF AWM-1
1 x DIL40/PLCC68 ZIF DS87C550
1 x BGA-Bottom-126
1 x BGA-Bottom-147
2 x BGA-Bottom-125
1 x DIL40/PLCC28 ZIF AWM-1
1 x BGA-Bottom-132
1 x BGA-Bottom-138
1 x DIL48/LQFP64 ZIF M38039/M39049
1 x DIL28/TSOP28 ZIF 11,8mm Flash
1 x End mill for aluminium 3mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x DIL32/PLCC32 ZIF-CS NOR-1
1 x Stainless steel cups
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x BGA-Bottom-139
1 x BGA-0246/0243
1 x Sanding pads for OZI 220/E grit 150
1 x Corundum fan sander for LWS
1 x BGA-Bottom-11
2 x BGA-Bottom-154
1 x DIL28/TSOP28 ZIF 11.8 mm
2 x BGA-Bottom-151
1 x DIL40/PLCC52 ZIF DS87C530
1 x HSS immersion saw blades for OZI
2 x Blade for Wood and Plastics
2 x BGA-Bottom-101
2 x BGA-Bottom-140
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x DIL40/PLCC68 ZIF AWM-1
1 x BGA-Bottom-153
1 x BGA-Bottom-135
1 x BGA-Bottom-141
1 x Stainless steel brushes
1 x BGA-Bottom-10
1 x End mill for aluminium 4mm
1 x BGA-Bottom-145
1 x Radius Cutting Attachment, complete with pointed tool
1 x BGA-Bottom-149
1 x DIL28/PLCC28 ZIF-CS
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Wheels brushes
1 x DIL40/TSOP40 ZIF-CS 12.4mm
1 x Crosscut 'Super-Cut' blade
1 x Multiform grindstone
1 x Protective device for hand-operated MICROMOT
1 x DIL40/PLCC52 ZIF AWM-2
1 x BGA-Bottom-1
1 x centrically clamping 100mm
1 x 6-piece set of ESD/EGB tweezers
1 x Rebating cutter 6.4mm
1 x BGA-Bottom-20
1 x BGA-Bottom-171
1 x BGA-Bottom-195
1 x PROTECTION 200ml
1 x BGA-Bottom-19
1 x Conj 5 pinças ESD
1 x BGA-Bottom-198
1 x DIL40/QFP80 ZIF M37702
1 x SPRAYOIL 200ml
1 x Insert LGTN-3
1 x ANTISTATIC 200ml
1 x BGA-Bottom-207
1 x PRINTER 200ml
2 x BGA-Bottom-209
1 x Ceramic-tipped tweezers and ESD 5-096
1 x POLISHER 200ml
1 x DIL28/QFP52 ZIF-CS SX52
1 x DIL48/QFP100 ZIF PLD-1
1 x DIL40/QFP64-3 ZIF NEC-1
1 x DIL48/QFP100 ZIF NEC-1
1 x DIL40/QFP64-2 ZIF-CS NEC-1
1 x BGA-0245/0243
1 x ESD Tweezers 5-192
1 x Cotton polishers
1 x SCREEN 200ml
1 x End side cutters EUROline-Conductive
1 x DIL40/QFP64-4 ZIF NEC-1
1 x DIL48/QFP100 ZIF PLD-2
1 x DIL48/QFP100 ZIF MB90F-1
1 x DIL48/QFP100 ZIF MSP430-1
1 x BGA-0245/0241
1 x OPTI BF20 VARIO
1 x BGA-Bottom-221
1 x DIL32/QFP64 ZIF H8-1
€18,920.77
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook