Top » Catalog » BERNSTEIN » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Felt polishers
1 x	Felt polishers
1 x	Conjunto de três brocas de ponto
1 x	HSS twist drill set to DIN 338
1 x	HSS drill bits 0.8mm
1 x	HSS drill bits 1.6mm
1 x	Flexible silicon discs
1 x	Tungsten carbide drills Ø2mm
1 x	Felt polishers
1 x	Mini side cutters EUROline-Conductive
1 x	Tungsten carbide drills Ø1mm
1 x	Flexible silicon discs
1 x	HSS twist drill set with centring pin
1 x	Tungsten carbide drills Ø1,5mm
1 x	HSS drill bits 0.5mm
1 x	HSS drill bits 1.0mm
1 x	Cotton polishers
1 x	Cotton polishers
1 x	Flexible polishing pad set
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	HSS drill bits 1.2mm
1 x	Wheels brushes
1 x	Steel brushes
1 x	High quality corundum grinding bits
1 x	Stainless steel wheels
1 x	High quality corundum grinding bits
1 x	Steel cups
1 x	High quality corundum grinding bits
1 x	Stainless steel cups
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Stainless steel brushes
1 x	Cups brushes
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Steel wheels
1 x	Brass brushes
1 x	High quality corundum grinding bits
1 x	Table Saw TKS 2500 SC
3 x	EUROline round nose pliers
2 x	Milling cutter set (6 - 10mm)
2 x	surface planing and thicknessing ADH 200
1 x	Milling cutter set (2 - 5mm)
2 x	Wood Lathe DB900
2 x	surface planing and thicknessing ADH 250
2 x	Vacum SAA 901
2 x	Table Sawr TKS 315 E
2 x	EUROline mini side cutter
1 x	Set of precision cutters
1 x	Disc cutters
1 x	Cylindrical cutters
1 x	Wolfram vanadium steel milling bits
1 x	Solid carbide stylus for engraving
1 x	Tungsten carbide cutter 3.0mm
1 x	Tungsten carbide cutter 1.0mm
1 x	Wolfram vanadium steel milling bits
1 x	Set of special steel cutters
1 x	Solid carbide stylus for engraving
1 x	Flame shaped milling cutters
2 x	Tungsten carbide cutters set
1 x	Cone shaped milling cutter
1 x	Ball shaped milling cutters
1 x	Diamond Cutting Discs
1 x	Screwdriver 2.0
1 x	EUROline top cutter
1 x	Fibre-Cut Discs
2 x	Screwdriver 2.5
1 x	Diamond Cutting Discs
2 x	Screwdriver 1.0
1 x	Screwdriver 2.5
1 x	Fibre-Cut Discs
1 x	Multiform grindstone
1 x	Fibre-Cut Discs
1 x	Screwdriver 3.0
1 x	Sanding fleece for LWS
1 x	Screwdriver 1.5
1 x	Fibre-Cut Discs
2 x	Screwdriver 3.0
1 x	EUROline mini side cutter
1 x	Mill/Drill System BFW 40/E
1 x	EUROline flat nose pliers

€7,696.21