€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

1 x	Contact bracelet with spiral cord
1 x	DIL14W/SOIC14 ZIF 150mil
2 x	BeeProg2
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	Diamond Cutting Discs
1 x	BGA-Bottom-1
1 x	BGA-Bottom-115
1 x	Crocodile clip
1 x	BGA-Bottom-103
1 x	BGA-Bottom-111
1 x	BGA-0245/0243
1 x	BGA-0245/0241
1 x	DIL24/QSOP24 ZIF 150mil
1 x	BeeHive204
1 x	BGA-Bottom-11
1 x	BGA-Bottom-102
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	Earth wire
1 x	End mill for aluminium 6mm
1 x	End mill for aluminium 4mm
1 x	Earthing module
1 x	DIL28/PLCC28 ZIF-CS
2 x	BeeHive208S
1 x	DIL28/PLCC28 ZIF
1 x	BGA-0246/0243
1 x	BGA-Bottom-106
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL28/PLCC84 ZIF HS538ESC01H
2 x	BGA-0245/0242
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Earth wire with dummy Schunko-plug
2 x	BGA-Bottom-108
1 x	BGA-Bottom-105
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL20/SOIC20 ZIF 200mil
1 x	DIL24/TSSOP24 ZIF 170mil
2 x	BGA-Bottom-10
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	BGA-0246/0244
1 x	DIL20/PLCC20 ZIF-CS
1 x	BGA-Bottom-101
1 x	DIL20W/PLCC20 ZIF
1 x	DIL28/QFN28-2 ZIF-CS
1 x	End mill for aluminium 3mm
1 x	Earth wire
1 x	Beeprog2C
1 x	Felt polishers
1 x	Fluted filter for CW-matic
1 x	MICROMOT extension cord. 300cm.
1 x	Flexible polishing pad set
1 x	BGA-Bottom-118
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Flexible polishing pad set
1 x	Cotton polishers
1 x	Cotton polishers
1 x	Sanding pads for OZI 220/E grit 240
1 x	Grinding mop cylinder grit 120
1 x	Footswitch FS

€27,808.99