Top » Catalog » Elnec » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Hot wire cutter THERMOCUT 12/E
1 x BGA-Bottom-224
1 x Precision steel vice PM 40
1 x BGA-Bottom-221
1 x sandpaper for PS 13 Grot 180
1 x BGA-Top-4 ZIF-CS
1 x BGA-Bottom-9
1 x BGA-Bottom-225
1 x BGA-Top-132 ZIF-CS
1 x BGA-Bottom-22
1 x BGA-Bottom-88
1 x BGA-Bottom-217
1 x BGA-Top-5 ZIF-CS
1 x BGA-Bottom-223
1 x BGA-Bottom-216
1 x sandpaper for PS 13 Grit 400
1 x Bottom PSOP44 NOR-1
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x sandpaper for PS 13 Grit 240
1 x Diamond Coated
1 x BGA-Bottom-5
1 x Tungsten Carbide Tipped (TCT)
1 x Super-Cut
1 x Hot wire cutter THERMOCUT 650
1 x Hot wire cutter THERMOCUT 230/E
1 x Broca de alta duração de 0.8mm
1 x BGA-Bottom-149
1 x Cross-recess Screwdrivers 2
1 x Tungstein carbide rasp - and cutting disc
1 x Corundum sanding discs for LWS
1 x Broca de alta duração de 0.5mm
1 x BGA-Bottom-135
1 x Corundum bound cutting disc for LWS
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x End side cutters 45º EUROline-Conductive
1 x Earthing module
1 x Broca de alta duração de 2.1mm
1 x 
1 x BGA-Bottom-145
1 x BGA-Bottom-148
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x BeeHive208S
1 x Silicon-Carbide.
1 x BGA-Bottom-138
1 x Broca de alta duração de 2.4mm
1 x MICROMOT Mains Adapter NG 5/E
1 x BeeProg2
1 x Broca de alta duração de 2.0mm
1 x Cross-recess Screwdrivers 1
1 x Crocodile clip
1 x Cross-recess Screwdrivers Pozidriv 2
1 x Felt cloth polishing disc (100 x 15mm)
1 x Sanding fleece for LWS
1 x Earth wire
1 x BGA-Bottom-146
1 x Cross-recess Screwdrivers 000
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Earth wire
1 x Cross-recess Screwdrivers 000
1 x Broca de alta duração de 0.9mm
1 x Three jaw chuck for the lathe DB 250
1 x Polishing Set
1 x MICROMOT Mains Adapter NG 2/S
1 x BGA-Bottom-144
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Broca de alta duração de 0.4mm
1 x broca de alta duração de 0,2mm
1 x Cross-recess Screwdrivers Pozidriv 1
1 x Cross-recess Screwdrivers 2
1 x Cross-recess Screwdrivers 00
1 x Corundum grinding disc for LWS
1 x Corundum grinding disc for LWS
1 x TIP SPT-9
1 x BGA-Bottom-151
1 x BGA-Bottom-147
1 x Earth wire with dummy Schunko-plug
1 x Broca de alta duração de 2.3mm
1 x Cross-recess Screwdrivers 1
1 x Broca de alta duração de 1.3mm
1 x Broca de alta duração de 1.5mm
1 x Cross-recess Screwdrivers 1
1 x BGA-Bottom-14
1 x Broca de alta duração de 1.1mm
1 x Special Fused Alumina (Hardness N).
1 x Backing disc for LWS
1 x BGA-Bottom-15
1 x BGA-Bottom-140
1 x Sanding fleece for LWS
1 x BGA-Bottom-127
1 x Independent four jaw chuck for the DB 250
1 x Broca de alta duração de 1.4mm
1 x Cross-recess Screwdrivers 00
1 x BGA-Bottom-132
1 x Drill chuck with sliding sleeve for the tailstock
1 x Broca de alta duração de 0.3mm
1 x Universal polishing paste
1 x Diamond-coated cutting and roughing disc
€12,914.79
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook