€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	Fixed Steady
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Brass contact cleaner brush
1 x	Collet Set for accurate use on round components
1 x	Multipurpose Vices Primus100
2 x	sanding belts for BBS/s Grit 150
3 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Glass fibre contact cleaner brush
1 x	MICROMOT Mains Adapter NG 2/E
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Replacement carving blades for MSG
1 x	Micro Compound Table KT 70
2 x	Cross-recess Screwdrivers 2
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	ESD Brushe
2 x	Cross-recess Screwdrivers 00
1 x	Tool holder for rotary tools
1 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	Chuck for TBM 220
1 x	Screwdriver 1.2
1 x	Screwdriver 2.0
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Screwdriver 0.8
1 x	Screwdriver 1.5
2 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Cross-recess Screwdrivers 000
2 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.8
1 x	ACCENT SERVICE TOOLS SET
1 x	Corundum fan sander for LWS
2 x	Core box bit 3.2mm
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Corundum bound cutting disc for LWS
1 x	Cotton polishers
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cutting disc, with reinforcement
1 x	Corundum grinding disc for LWS
1 x	Cut off/mitre saw KGS 80
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cotton polishers
1 x	Corundum sanding discs for LWS
1 x	Cylinder shaped milling cutters
1 x	Corundum grinding disc for LWS
1 x	ESD Tweezers 5-195
1 x	OPTI BF16 Vario
1 x	Cups brushes
1 x	Conjunto de três brocas de ponto
1 x	Corundum fan sander for LWS
2 x	Crosscut 'Super-Cut' blade
3 x	Disc Sander TG 250/E
1 x	Hand Magnifier 2-293
1 x	Four Jaw Chuck
1 x	Sanding pads for OZI 220/E grit 80
1 x	Solid carbide stylus for engraving
1 x	Angle polisher WP/E
1 x	Rounding over cutter 6.4mm
1 x	Slot cutter 3.2mm
2 x	Belt sander BS/E
1 x	Slot cutter 6.5mm
1 x	Edge cutter with pin 6.4mm
1 x	Long neck angle grinder LHW
1 x	Pensander PS 13
2 x	Delta sander OZI/E
1 x	Rebating cutter 6.4mm
3 x	Belt sander BBS/S
1 x	Glass fibre contact cleaner brush
2 x	Broca de alta duração de 2.9mm
1 x	Polishing machine PM 100
1 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	Multiform grindstone
1 x	Solid carbide stylus for engraving
1 x	Cylindrical cutters
1 x	Screwdriver 4.0
2 x	Disc Sander TG 125/E
1 x	Slot cutter 5.0mm
1 x	Angle cutter 45 °
1 x	Combi cutter 6.5/2.5mm
1 x	Diamond Grinding Bits 5mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Grinding and Polishing Machine SP/E
1 x	V-slot cutter 6.5mm
2 x	Cross-recess Screwdrivers 0
1 x	DIL28/PLCC28 ZIF-CS
1 x	BGA-Bottom-106
1 x	Tungsten tipped saw blade
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	BGA-Bottom-103
1 x	BeeHive204
1 x	BGA-Bottom-105
1 x	BGA-Bottom-9
1 x	Bottom PSOP44 NOR-2
1 x	Bottom PSOP44 NOR-1
1 x	BeeHive208S
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-0245/0243
1 x	BGA-Bottom-217
1 x	BGA-Bottom-218
1 x	BGA-Bottom-229
2 x	BGA-0246/0243
1 x	BGA-Bottom-5
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Bottom PSOP44 NOR-3
1 x	sandpaper for PS 13 Grot 180
1 x	sanding belts for BBS/s Grit 240
1 x	BGA-Bottom-115
1 x	Corundum sanding discs for LWS
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL24/QSOP24 ZIF 150mil
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	sanding belts for BBS/s Grit 80
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-0245/0241
1 x	BeeProg2
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	BGA-Bottom-11
1 x	Diamond blade
1 x	BGA-Bottom-231
1 x	BGA-Top-132 ZIF-CS
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Solid carbide saw blade
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BGA-Bottom-223
1 x	BGA-Bottom-221
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	BGA-Bottom-222
1 x	BGA-0245/0242
1 x	BGA-Bottom-8
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	DIL28/PLCC28 ZIF
1 x	DIL20W/PLCC20 ZIF
1 x	BGA-Bottom-108
1 x	BGA-Bottom-101
1 x	BGA-Bottom-88
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	BGA-Bottom-22
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	BGA-Bottom-225
1 x	BGA-Bottom-224
1 x	BGA-Bottom-111
1 x	Saw blade made of high-alloy special steel
1 x	BGA-Bottom-157
1 x	BGA-Bottom-167
1 x	BGA-Bottom-174
1 x	Steel cups

€25,684.44