€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	BIT-SET
1 x	BGA-Bottom-15
1 x	Flexible polishing pad set
2 x	Broca de alta duração de 1.1mm
2 x	Broca de alta duração de 2.5mm
2 x	Broca de alta duração de 1.3mm
1 x	BGA-Bottom-148
1 x	BGA-Bottom-216
2 x	Metal Cutting Blades
1 x	Cross-recess Screwdrivers 1
2 x	Broca de alta duração de 2.3mm
1 x	Inspector mirror
1 x	Glass fibre contact cleaner brush
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	PVC-insulated tweezers 5-121-6
3 x	Plastic magnifying glass
1 x	BGA-Bottom-195
1 x	High quality corundum grinding bits
1 x	Cotton polishers
1 x	BGA-0245/0242
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	BGA-Bottom-103
1 x	SmartProg2
1 x	BGA-Bottom-207
1 x	BGA-Bottom-21
1 x	BGA-Bottom-141
1 x	Slot cutter 5.0mm
1 x	Cross-recess Screwdrivers 00
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BGA-Bottom-10
1 x	Screwdriver 2.0
2 x	Broca de alta duração de 0.4mm
1 x	Screwdriver 1.5
1 x	Diamond-coated cutting and roughing disc
1 x	BGA-Bottom-102
2 x	Broca de alta duração de 1.5mm
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-214
2 x	Broca de alta duração de 2.4mm
2 x	Broca de alta duração de 1.0mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	BeeHive204
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	BGA-Bottom-198
1 x	EUROline-Conductive set of pliers
1 x	Screwdriver 0.8
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Flexible silicon discs
1 x	6pcs Double Open End wrench set
1 x	Diamond Cutting Discs
1 x	Handy 1515
2 x	Broca de alta duração de 2.2mm
1 x	Felt polishers
1 x	BGA-Bottom-11
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	BGA-Bottom-135
1 x	Felt polishers
1 x	Cross-recess Screwdrivers 2
1 x	Screwdriver 1.0
1 x	Mini side cutters EUROline-Conductive
1 x	Cross-recess Screwdrivers 2
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Turning inserts VCMT070204
1 x	High quality corundum grinding bits
1 x	ACCENT SERVICE TOOLS SET
1 x	BGA-Bottom-151
2 x	broca de alta duração de 0,2mm
1 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Broca de alta duração de 2.1mm
2 x	Broca de alta duração de 2.0mm
1 x	BGA-Bottom-139
1 x	Slot cutter 3.2mm
1 x	Broca de alta duração de 1.4mm
2 x	6-piece screwdriver and cross-recess set
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-208
1 x	Glass fibre contact cleaner brush
1 x	EUROline side cutter rounded head
1 x	6-piece TORX-screwdriver-set
1 x	BGA-Bottom-194
1 x	BGA-0245/0241
1 x	WCMT050308
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
2 x	broca de alta duração de 0,6mm
1 x	BGA-Bottom-138
1 x	BGA-Bottom-217
1 x	BGA-Bottom-150
1 x	BGA-Bottom-211
1 x	PVC-insulated tweezers 5-117-6
1 x	Cross-recess Screwdrivers 1
1 x	BGA-Bottom-146
1 x	Screwdriver 1.8
1 x	BGA-Bottom-115
2 x	Hand magnifier with LED light 3X
1 x	BGA-Bottom-20
1 x	BGA-Bottom-215
1 x	BGA-Bottom-212
1 x	PLCC Puller
1 x	Half round cutter 13mm
1 x	Cotton polishers
1 x	Core box bit 3.2mm
1 x	BGA-Bottom-2
1 x	BGA-Bottom-131
1 x	High quality corundum grinding bits
1 x	Flexible polishing pad set
1 x	BGA-0245/0243
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Broca de alta duração de 0.7mm
1 x	MICRO Miller FF 230
1 x	Cross-recess Screwdrivers 000
1 x	Felt polishers
1 x	Cross-recess Screwdrivers 00
1 x	BGA-Bottom-111
1 x	BGA-Bottom-149
1 x	IC tweezers
1 x	Round nose pliers 185mm
1 x	High quality corundum grinding bits
1 x	BGA-0246/0244
1 x	Cotton polishers
1 x	BGA-0246/0243
1 x	Beeprog2C
1 x	Fibre-Cut Discs
1 x	Mini side cutters EUROline-Conductive
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	BGA-Bottom-144
1 x	Screwdriver 2.0
1 x	BGA-Bottom-1
2 x	Broca de alta duração de 1.2mm
1 x	Mini side cutters EUROline-Conductive
2 x	Broca de alta duração de 0.5mm
1 x	6-piece TORX-screwdriver-set ESD
1 x	BGA-Bottom-108
2 x	Broca de alta duração de 0.9mm
1 x	High quality corundum grinding bits
1 x	Precision lathe PD 250/E
1 x	BGA-Bottom-196
1 x	Screwdriver 2.0
1 x	BGA-Bottom-132
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Brass contact cleaner brush
1 x	BGA-Bottom-127
1 x	BGA-Bottom-140
2 x	Broca de alta duração de 0.8mm
1 x	Polishing paste
1 x	Round nose pliers 160mm
1 x	Screwdriver 1.2
1 x	BGA-Bottom-106
1 x	Cylinder sander WAS/E
1 x	Flexible silicon discs
1 x	BGA-Bottom-209
1 x	Floor cover ESD
1 x	Inpection mirror 1-978
1 x	6-piece screwdriver and cross-recess set
1 x	High quality corundum grinding bits
1 x	6-piece set of ESD/EGB tweezers
1 x	BGA-Bottom-199
1 x	BGA-Bottom-201
1 x	BGA-Bottom-204
1 x	Cross-recess Screwdrivers 1
1 x	Felt polishers
2 x	Fibre-Cut Discs
1 x	Flat nose pliers 160mm
1 x	PVC-insulated tweezers 5-107-6
1 x	Antiallergical Tweezers 5-107-1
1 x	Angle cutter 45 °
1 x	Fibre-Cut Discs
1 x	Universal holder UHZ
1 x	BeeHive208S
2 x	Fibre-Cut Discs
1 x	Turning inserts WCMX050308F
1 x	PLCC Extractor
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Hand Magnifier 2-293
1 x	10-piece wood router cutter set
1 x	BGA-Bottom-202
2 x	Fibre-Cut Discs
1 x	Ceramic tweezers 5-081
1 x	6-piece screwdriver set ESD
1 x	Round nose pliers 45º EUROline-Conductive
1 x	BGA-Bottom-145
1 x	Antiallergical Tweezers 5-117-1
1 x	6-piece screwdriver and cross-recess set ESD
1 x	BeeProg2
1 x	Cross-recess Screwdrivers 000
1 x	Screwdriver 1.5
1 x	BGA-Bottom-126
1 x	BGA-Bottom-101
1 x	BGA-Bottom-147
1 x	Round nose pliers 165mm
1 x	Blade holders for DS 460
2 x	Broca de alta duração de 0.3mm
1 x	Flexible silicon discs
1 x	TORX-screwdrivers T5
1 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/P
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	TORX-screwdrivers T6
1 x	TORX-screwdrivers T9
2 x	Diamond Cutting Discs
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	TORX-screwdrivers T8
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	6-piece screwdriver and cross-recess set
1 x	Three-jaw steel drill chuck

€24,715.52