€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Ball shaped milling cutters
1 x	Nylon Fleece Brushes
1 x	Tungsten carbide drills Ø1mm
1 x	HSS drill bits 0.5mm
1 x	Set of precision cutters
1 x	HSS drill bits 1.0mm
1 x	Disc cutters
1 x	Cone shaped milling cutter
1 x	Solid carbide stylus for engraving
1 x	Sanding Drums
1 x	Solid carbide stylus for engraving
1 x	Tungsten carbide cutter 1.0mm
1 x	Cylinder shaped milling cutters
2 x	Tungsten carbide cutters set
1 x	HSS drill bits 1.2mm
1 x	Sanding Drums
1 x	HSS twist drill set with centring pin
1 x	Sanding Drums
1 x	HSS twist drill set to DIN 338
1 x	Conjunto de três brocas de ponto
1 x	Corundum grinding disc for LWS
1 x	Flame shaped milling cutters
1 x	Sanding fleece for LWS
1 x	Steel wheels
1 x	Cups brushes
1 x	Brass brushes
1 x	Wheels brushes
1 x	Stainless steel wheels
1 x	Stainless steel brushes
1 x	Steel cups
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Handy 1515
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	Coarse-toothed (18 TPI per 25mm)
2 x	Replacement glue sticks for HKP 220
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Polishing Set
1 x	Grinding mop cylinder grit 240
1 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Corundum fan sander for LWS
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Tungstein carbide rasp - and cutting disc
2 x	Special Fused Alumina (Hardness N).
1 x	Grinding mop cylinder grit 120
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Grinding mop cylinder grit 120
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Silicon-Carbide.
1 x	Grinding mop cylinder grit 80
1 x	Super-Cut
1 x	BGA-Bottom-151
1 x	Dividing attachment TA 230 for PF 250
1 x	BGA-Bottom-147
1 x	MICROMOT steel collet set
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	BGA-Bottom-150
1 x	Aluminium Die-Cast
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Dial gauge
1 x	MICROMOT tool holder
1 x	BGA-Bottom-14
2 x	Machine Vice MS 4
1 x	BGA-Bottom-131
1 x	BGA-Bottom-140
1 x	Precision Vice FMS 75
1 x	BGA-Bottom-141
1 x	BGA-Bottom-139
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Multipurpose Vices Primus 75
1 x	Precision steel vice PM 40
1 x	Hot wire cutter THERMOCUT 230/E
1 x	BGA-Bottom-144
1 x	Footswitch FS
1 x	BGA-Bottom-132
1 x	BGA-Bottom-148
1 x	Protective device for hand-operated MICROMOT
1 x	Diamond-coated cutting disc for MIC
1 x	BGA-Bottom-126

€3,096.77