€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

2 x	TOP-PIN 200ml
1 x	SILICONE 200ml
1 x	Universal and oil siphoning pump AP 12
1 x	POLISHER 200ml
2 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	FLUX-OFF 400ml
1 x	Diamond Cutting Discs
1 x	Flap Wheels
1 x	BeeProg2
3 x	ANTISTATIC 200ml
2 x	HSS drill bits 1.0mm
1 x	BGA-Bottom-11
2 x	HSS drill bits 0.5mm
2 x	VASELINE 200ml
1 x	BGA-Bottom-105
1 x	BGA-Bottom-108
1 x	Independent four jaw chuck for the DB 250
1 x	Tungsten carbide drills Ø2mm
1 x	Centre Turning Attachment
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	HSS boring tool set, 6 pieces
2 x	HSS twist drill set with centring pin
1 x	CD-CLEANER 200ml
2 x	Router base OFV
1 x	TUNER 200ml
3 x	DUSTER-BR 200ml
1 x	SCREEN 200ml
2 x	Replacement belts for BSL 220/E
2 x	Conjunto de três brocas de ponto
1 x	BGA-Bottom-115
2 x	Diamond cutting blade for OZI
1 x	MULTI 200ml
1 x	FREEZER-BR 200ml
2 x	Pensander PS 13
2 x	Dividing attachment TA 230 for PF 250
1 x	PROLUB 200ml
1 x	Diamond Cutting Discs
1 x	HSS cutting blade for OZI
1 x	Disc Sander TG 250/E
1 x	BGA-Bottom-101
2 x	HSS twist drill set to DIN 338
2 x	HSS drill bits 0.8mm
1 x	HSS immersion saw blades for OZI
1 x	Diamond blade for MBS 240/E
1 x	SPRAYOIL 200ml
1 x	Engraving tool GG
1 x	Three jaw chuck for the lathe DB 250
1 x	BGA-0245/0241
1 x	Diamond-coated cutting and roughing disc
1 x	Diamond Grinding Bits 1,8mm
1 x	BGA-0246/0243
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Tungsten carbide drills Ø1,5mm
1 x	HSS drill bits 1.6mm
1 x	VIDEOCLEAN 200ml
1 x	BGA-Bottom-10

€4,032.11