€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	DIL32/QFP64 ZIF H8-1
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL40/TQFP64 ZIF EM652X
1 x	DIL48/QFP100 ZIF NEC-2
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	DIL48/QFP100 ZIF NEC-1
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	DIL48/QFP100 ZIF PLD-3
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	DIL48/QFP100 ZIF PLD-1
1 x	DIL8/QFN8-1 ZIF-CS
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	SCLCR1010E06
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL32/PLCC32 ZIF
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL40/QFP144 ZIF LPC-1
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL48/TQFP48-1 ZIF
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL44/SSOP44 ZIF 240mil
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL48/MQFP80 ZIF C500
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	BGA-Bottom-8
2 x	Three-jaw steel drill chuck
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL44/TQFP44-1 Zif
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL48/QFN48 ZIF-CS
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL48/SSOP48 ZIF 300mil
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	DIL40/TQFP64 ZIF CC-1
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL40/QFP144 ZIF H8S-1
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	Top PSOP44 ZIF 600mil
1 x	Fixed Steady
1 x	Four Jaw Chuck
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Slot cutter 6.5mm
1 x	Machine Vice MS 4
2 x	Router base OFV
1 x	Ball-shaped diamond coated 3.2mm
2 x	Ball-shaped diamond coated 1.2mm
2 x	Diamond Cutting Discs
2 x	Diamond Twist Drills
1 x	Diamond Cutting Discs
3 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1mm
1 x	Diamond Cutting Discs
2 x	Diamond Grinding Bits 5mm
1 x	Grinding mop cylinder grit 240
1 x	Milling cutter set (2 - 5mm)
1 x	IC tweezers
1 x	Rebating cutter 6.4mm
1 x	Cutting disc, with reinforcement
1 x	Aluminium Die-Cast
2 x	Sanding Drums
3 x	Sanding Discs
2 x	Flap Wheels
1 x	Brass contact cleaner brush
2 x	Sanding bands 14x13mm
1 x
1 x	Corundum fan sander for LWS
2 x	Sanding bands 14x13mm
1 x	Flap Wheels
2 x	Sanding Drums
2 x	TIP SPT-3
2 x	TIP SPT-9
3 x	Hot wire cutter THERMOCUT 230/E
2 x	TIP SPT-10
1 x	Nylon Fleece Brushes
1 x	Sanding Discs
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	TIP SPT-6
2 x	Wood Lathe DB900
1 x	Ball-shaped diamond coated 2.2mm
1 x	Independent four jaw chuck for the DB 250
1 x	TIP SPT-4
2 x	Combi cutter 6.5/2.5mm
1 x	TIP SPT-2
3 x	Table Sawr TKS 315 E
1 x	Table Saw TKS 2500 SC
1 x	Replacement cutting wire for the THERMOCUT 12/E
3 x	Wood Lathe DB450
3 x	Vacum SAA 901
1 x	End milling cutter kit HSS 12 pcs
1 x	Cross-recess Screwdrivers 2
1 x	6-piece screwdriver and cross-recess set ESD
1 x	6-piece wrench key set ESD
2 x	Surface planer AH 80
1 x	Screwdriver 2.0
1 x	Tungsten carbide drills Ø2mm
1 x	BIT-SET
1 x	Antiallergical Tweezers 5-155-1
1 x	6pcs Double Open End wrench set
2 x	6-piece TORX-screwdriver-set
1 x	6-piece screwdriver and cross-recess set
1 x	6-piece screwdriver and cross-recess set
1 x	HSS drill bits 1.2mm
1 x	HSS twist drill set to DIN 338
1 x	HSS drill bits 1.6mm
1 x	surface planing and thicknessing ADH 200
1 x	Ceramic tweezers 5-081
1 x	6-piece socket wrenches ESD
3 x	6-piece screwdriver and cross-recess set
1 x	6-piece TORX-screwdriver-set ESD
1 x	Cross-recess Screwdrivers 000
1 x	Antiallergical Tweezers 5-117-1
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 2.5
1 x	FREEZER-BR 200ml
1 x	6-piece set of ESD/EGB tweezers
2 x	Screwdriver bit set. 49-piece.
1 x	Cross-recess Screwdrivers 1
1 x	Antiallergical Tweezers 5-125-1
1 x	Antiallergical Tweezers 5-121-1
1 x	Screwdriver 2.0
1 x	HSS drill bits 0.5mm
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 000
1 x	Cross-recess Screwdrivers 00
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 1
1 x	Antiallergical Tweezers 5-107-1
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Lathe System PD 400
1 x	Precision lathe PD 250/E
1 x	Cylindrical cutters
1 x	Cutter head for copy and surface milling MT2
1 x	Cutter head for copy and surface milling MT3
1 x	Blade guides separately
1 x	Blade for Steel and brass
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Blade for Wood and Plastics
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Diamond blade for MBS 240/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Chuck for TBM 220
1 x	Crimping plier for BNC
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Micro Compound Table KT 70
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Fibre-Cut Discs
1 x	Broca de alta duração de 0.3mm
1 x	Diamond Grinding Bits 1,8mm
1 x	MICROMOT glue gun HKP 220
1 x	Backing disc for LWS
1 x	PROLUB 200ml
1 x	TOP-PIN 200ml
1 x	MULTI 200ml
1 x	Super jig saw STS/E
1 x	ANTISTATIC 200ml
1 x	Universal and oil siphoning pump AP 12
1 x	End milling cutter kit HSS 20 pcs
1 x	VASELINE 200ml
1 x	SPRAYFLON 200ml
1 x	SILICONE 200ml
1 x	SPRAYOIL 200ml
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Belt sander BBS/S
1 x	BGA-Bottom-140
1 x	BGA-Bottom-141
1 x	BGA-Bottom-148
1 x	BGA-Bottom-118
1 x	sanding belts for BBS/s Grit 80
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	BGA-Bottom-145
1 x	Conjunto de três brocas de ponto
1 x	BGA-Bottom-138
1 x	BGA-Bottom-13
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	MICROFLAME burner MFB/E

€28,015.53