€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

3 x	BeeHive204
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	MICROMOT drill stand MB 200
2 x	Coarse-toothed (25 TPI per 25mm)
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x	6-piece screwdriver set ESD
2 x	Morse taper MT2 - B16
1 x	Corundum grinding disc for LWS
3 x	TORX-screwdrivers T10
2 x	Disc Sander TG 125/E
3 x	ESD-handling set
2 x	Cutting tool 10 mm
1 x	Backing disc for LWS
3 x	ESD-handling ser 9-361
2 x	3-jaw chuck centrically clamping 125mm
2 x	machine base with shelves for D250X550
2 x	lathe tools 10mm
2 x	TU 2004V
2 x	Lathe chuck flange for D250X550
2 x	Footswitch FS
2 x	TORX-screwdrivers T10
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Super safety and specialty bit set, 75-piece
1 x	Four Jaw Chuck
2 x	6-piece socket wrenches ESD
2 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Tool holder for rotary tools
1 x	centrically clamping 125mm
1 x	Side cutters EUROline-Conductive
1 x	4-jaw chuck individually clamping 125mm
1 x	6-piece screwdriver and cross-recess set ESD
1 x	TU 2404
1 x	Wrench Keys 2.0
1 x	TORX-screwdrivers T9
1 x	6-piece TORX-screwdriver-set ESD
1 x	Diamond blade for MBS 240/E
1 x	6-piece wrench key set ESD
1 x	TU 1503V
1 x	Corundum sanding discs for LWS
1 x	Wrench Keys 0.7
1 x	Slot cutter 3.2mm
1 x	TORX-screwdrivers T20
1 x	Wrench Keys 1.3
1 x	BeeHive208S
1 x	Wrench Keys 2.5
1 x	Wrench Keys 1.5
1 x	Wrench Keys 0.9
1 x	TORX-screwdrivers T15
1 x	Professional Drill/Grinder IBS/E
1 x	Cotton polishers
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Flexible silicon discs
1 x	Flexishaft MICROMOT 110/BF
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Felt polishers
1 x	Felt polishers
1 x	Blade holders for DS 460
1 x	Flexible silicon discs
1 x	Felt polishers
1 x	Polishing paste
1 x	Cotton polishers
1 x	Flexible polishing pad set
1 x	Cotton polishers
1 x	sandpaper for PS 13 Grit 400
1 x	Flexible silicon discs
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-131
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	BGA-Bottom-13
1 x	EUROline-Conductive set of pliers
1 x	BGA-Bottom-148
1 x	Tungsten carbide drills Ø2mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Sanding Discs
1 x	BGA-Bottom-147
1 x	BGA-Bottom-140
1 x	Diamond Grinding Bits 1,8mm
1 x	Nylon Fleece Brushes
1 x	BGA-Bottom-125
1 x	HSS drill bits 1.2mm
1 x	Cross-recess Screwdrivers 2
1 x	Flap Wheels
1 x	HSS drill bits 1.0mm
1 x	Diamond Grinding Bits 5mm
1 x	Tungsten carbide drills Ø1,5mm
1 x	Sanding Drums
1 x	Diamond Cutting Discs
1 x	BGA-Bottom-146
1 x	BGA-Bottom-14
1 x	Tungsten carbide drills Ø1mm
1 x	BGA-Bottom-127
1 x	Flap Wheels
1 x	Sanding bands 14x13mm
1 x	HSS twist drill set to DIN 338
1 x	BGA-Bottom-149
1 x	BGA-Bottom-118
1 x	BGA-Bottom-132
1 x	Sanding bands 14x13mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Diamond Cutting Discs
1 x	Cross-recess Screwdrivers 000
1 x	Ball-shaped diamond coated 1.2mm
1 x	ACCENT SERVICE TOOLS SET
1 x	Sanding Discs

€28,982.28