Top » Catalog » Elnec » 60-0052

€999.00 + VAT

BeeProg2
[60-0052]

BeeProg2

Very fast universal USB/LPT interfaced programmer.


If you're looking for lower price universal programmer, please take a look at BeeProg2C programmer.

 
Short description:

  • supported devices from manufactures
  • extremely fast programming, one of the fastest programmers in this category. Sustainable programming speed greater than 5 MBytes per second. Programs 2 GB eMMC NAND Flash in less than 365 sec.
  • 48-pins powerful pindrivers, no adapter required for any DIL devices
  • ISP connector for in-circuit programming
  • connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
  • after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
  • comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • Multiprogramming possible by attaching more programmers to one PC
  • made in Slovakia
  • warranty - 3 years

""

More Information here: http://www.elnec.com/products/universal-programmers/beeprog2/

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x 
1 x BGA-Bottom-22
1 x BGA-Bottom-221
1 x Ball shaped milling cutters
1 x Bench Circular Saw KS 230
2 x Backing disc for LWS
1 x BGA-Top-132 ZIF-CS
2 x Bench drill machine TBM 220
2 x Aluminium Die-Cast
1 x BGA-Bottom-216
1 x BGA-Bottom-223
1 x BGA-Top-3 ZIF-CS
1 x Band knife of hardened spring band steel (without teeth)
1 x BGA-Top-5 ZIF-CS
1 x Ball-shaped diamond coated 2.2mm
1 x sandpaper for PS 13 Grit 240
1 x BGA-Bottom-5
1 x Belt sander BS/E
2 x Bench drill press TBH
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Blade for Steel and brass
1 x Angle polisher WP/E
1 x BGA-Bottom-217
1 x BGA-Bottom-88
1 x sandpaper for PS 13 Grit 400
1 x BGA-Bottom-225
2 x 10-piece wood router cutter set
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Ball-shaped diamond coated 1.2mm
1 x Ball-shaped diamond coated 3.2mm
2 x 14-piece parallel supports set
1 x BGA-Bottom-231
1 x BGA-Bottom-224
1 x BGA-Bottom-9
1 x BGA-Top-4 ZIF-CS
1 x BGA-Bottom-218
1 x Felt cloth polishing disc (100 x 15mm)
1 x 2-speed scroll saw DSH
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x BGA-Bottom-8
1 x Belt sander BBS/S
2 x Angle cutter 45 °
1 x BGA-Bottom-222
1 x Universal polishing paste
1 x sandpaper for PS 13 Grot 180
1 x Bottom PSOP44 NOR-1
1 x BGA-Bottom-229
1 x DIL28/PLCC28 ZIF
1 x Drill chuck with sliding sleeve for the tailstock
1 x Dividing attachment TA 230 for PF 250
2 x Micro Compound Table KT 70
1 x Supercut jig saw blades of special steel
1 x Grinding mop cylinder grit 120
1 x DIL20/PLCC20 ZIF-CS
1 x DIL14W/SOIC14 ZIF 150mil
1 x DIL16/SOIC16 ZIF 200 mil
1 x MICROMOT drill stand MB 200
1 x Jig saw blades made of HSS
1 x MICROMOT tool holder
1 x Five piece HSS chisel set
1 x Mill/Drill Unit BFB 2000.
1 x Independent four jaw chuck for the DB 250
1 x Replacement cutting disc for MICRO cutter MIC
1 x DIL16W/SOIC16 ZIF 150mil
2 x Footswitch FS
1 x DIL20W/SOIC20 ZIF 300mil
1 x MICROMOT extension cord. 300cm.
1 x Grinding mop cylinder grit 80
1 x MICROMOT steel collet set
1 x DIL20/SOIC20 ZIF 300 mil
1 x Flexishaft MICROMOT 110/BF
1 x Grinding mop cylinder grit 240
1 x DIL28/PLCC32 ZIF EPROM
1 x Bottom PSOP44 NOR-2
3 x BGA-Bottom-101
1 x DIL24/QSOP24 ZIF 150mil
1 x DIL18W/SOIC18 ZIF 300mil
1 x DIL20/SOIC20 ZIF 200mil
1 x Flexishaft MICROMOT 110/P
1 x DIL28/PLCC28 ZIF-CS
1 x Spare cutting wire
1 x DIL24/TSSOP24 ZIF 170mil
1 x Protective device for hand-operated MICROMOT
1 x Three jaw chuck for the lathe DB 250
1 x Three-jaw steel drill chuck
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x Bottom PSOP44 NOR-3
1 x Grinding mop cylinder grit 120
1 x DIL20W/PLCC20 ZIF
1 x DIL24W/SOIC24 ZIF 300mil
1 x Diamond-coated cutting and roughing disc
1 x DIL16/SOIC16-1 ZIF 170mil
1 x DIL16W/SOIC16 ZIF 300mil
1 x Diamond-coated cutting disc for MIC
1 x Coarse-toothed (25 TPI per 25mm)
1 x Long neck straight drill/grinder LB/E
2 x BGA-Bottom-115
1 x MICROMOT 230/E
1 x Super-fine sanding discs grain 000
1 x Beeprog2C
1 x BGA-Bottom-194
1 x Tungsten carbide cutters set
2 x BGA-0245/0242
1 x Mill/Drill System BFW 40/E
1 x Precision drill grinder FBS 12/EF
1 x BGA-Bottom-207
1 x BGA-Bottom-198
2 x BGA-Bottom-10
1 x Sanding pads for OZI 220/E grit 80
1 x Super-fine sanding discs grain 400
1 x MICROMOT 50/EF
1 x BGA-Bottom-118
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x BeeHive204
1 x MICROMOT Mains Adapter NG 2/S
1 x Professional set for finish grinding and polishing
2 x BGA-Bottom-102
1 x BGA-Bottom-204
1 x BGA-Bottom-195
3 x BGA-Bottom-103
1 x Edge cutter with pin 6.4mm
1 x BGA-Bottom-199
1 x Slot cutter 6.5mm
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x BGA-Bottom-212
1 x Super-fine sanding discs grain 2000
1 x Sanding pads for OZI 220/E grit 150
1 x Coarse-toothed (18 TPI per 25mm)
1 x Replacement glue sticks for HKP 220
1 x Rebating cutter 6.4mm
1 x MICROMOT Mains Adapter NG 5/E
1 x sanding belts for BBS/s Grit 150
1 x BGA-Bottom-20
2 x BGA-0245/0243
1 x BGA-Bottom-211
1 x Microfibre cloth
2 x BGA-0246/0243
1 x Coarse-toothed (10 TPI per 25mm)
1 x Sanding pads for OZI 220/E grit 240
1 x BGA-Bottom-196
2 x BGA-Bottom-108
1 x HSS immersion saw blades for OZI
3 x BGA-Bottom-11
1 x BGA-Bottom-208
1 x BGA-Bottom-214
1 x Blade holders for DS 460
1 x MICROMOT 50/E
1 x Half round cutter 13mm
1 x BGA-Bottom-209
2 x BGA-0246/0244
2 x BGA-Bottom-106
1 x MICRO Miller MF 70
2 x BGA-Bottom-111
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x BGA-Bottom-125
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x BGA-0245/0241
1 x Professional Drill/Grinder IBS/E
1 x HSS immersion saw blades for OZI
1 x Rounding over cutter 6.4mm
1 x BGA-Bottom-202
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x BGA-Bottom-2
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x BGA-Bottom-191
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Diamond cutting blade for OZI
1 x Precision steel vice PM 40
1 x Machine Vice MS 4
1 x BGA-Bottom-215
1 x Combi cutter 6.5/2.5mm
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Precision Drill/Grinder FBS 240/E
1 x BGA-Bottom-21
1 x sanding belts for BBS/s Grit 240
1 x Slot cutter 3.2mm
1 x Lambswool polishing disc
1 x V-slot cutter 6.5mm
1 x Step clamps made of steel
1 x MICROMOT 50
1 x sanding belts for BBS/s Grit 80
1 x BeeHive208S
1 x Slot cutter 5.0mm
1 x Core box bit 3.2mm
1 x HSS cutting blade for OZI
1 x Professional polishing sponge
1 x BGA-Bottom-192
1 x MICRO Miller FF 230
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x MICRO Miller FF 500
1 x BGA-Bottom-201
1 x Chuck for TBM 220
1 x BGA-Bottom-105
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Polishing felt, medium hard
1 x Fine dust paper filter for CW-matic
1 x Glass fibre contact cleaner brush
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
€35,954.87
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Professional set for finish grinding and polishing
Professional set for finish grinding and polishing
€27.56
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online