€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Universal and oil siphoning pump AP 12
1 x	Grinding mop cylinder grit 120
2 x	Flap Wheels
1 x	Four Jaw Chuck
1 x	Half round cutter 13mm
1 x	Flap Wheels
2 x	Grinding and Polishing Machine SP/E
2 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/P
2 x	Flexible silicon discs
1 x	High quality corundum grinding bits
1 x	Flexible polishing pad set
1 x	Flexible polishing pad set
1 x	Flexishaft MICROMOT 110/BF
1 x	Gear Chuck
2 x	Flexible silicon discs
2 x	Fluted filter for CW-matic
1 x	Grinding mop cylinder grit 240
1 x	Grinding mop cylinder grit 120
1 x	Corundum sanding discs for LWS
1 x	Core box bit 3.2mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cotton polishers
1 x	Cylinder shaped milling cutters
1 x	Corundum grinding disc for LWS
1 x	Conjunto de três brocas de ponto
1 x	Corundum grinding disc for LWS
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cotton polishers
1 x	Cut off/mitre saw KGS 80
2 x	Cups brushes
2 x	Crosscut 'Super-Cut' blade
1 x	Corundum fan sander for LWS
1 x	Corundum fan sander for LWS
1 x	Corundum sanding discs for LWS
1 x	Steel wheels
1 x	Fixed Steady
1 x	Sanding pads for OZI 220/E grit 150
2 x	Bench drill press TBH
1 x	Backing disc for LWS
1 x	Stainless steel cups
1 x	Stainless steel wheels
1 x	Stainless steel brushes
1 x	Brass brushes
2 x	Spare cutting wire
1 x	Wheels brushes
2 x	MICROMOT extension cord. 300cm.
1 x	Sanding pads for OZI 220/E grit 240
2 x	MICROFLAM gas soldering set MGS
1 x	Steel cups
2 x	Radius Cutting Attachment, complete with pointed tool
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Steel brushes
1 x	Professional polishing sponge
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	BGA-Bottom-125
1 x	MICROMOT 50/E
3 x	BGA-Bottom-105
1 x	Replacement belts for BSL 220/E
1 x	sanding belts for BBS/s Grit 240
1 x	Blade for Wood and Plastics
3 x	BGA-0245/0241
1 x	Super-fine sanding discs grain 400
2 x	Beeprog2C
3 x	BGA-Bottom-106
1 x	BGA-Bottom-118
3 x	BGA-Bottom-103
3 x	BGA-Bottom-108
1 x	MICROMOT glue gun HKP 220
1 x	Diamond blade for MBS 240/E
3 x	BGA-Bottom-11
2 x	BGA-0246/0244
1 x	MICROMOT drill stand MB 200
1 x	sanding belts for BBS/s Grit 80
1 x	Tungsten Carbide Tipped (TCT)
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Coarse-toothed (25 TPI per 25mm)
3 x	BGA-Bottom-10
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	BeeHive204
1 x	Rounding over cutter 6.4mm
1 x	HSS immersion saw blades for OZI
1 x	Mill/Drill Unit BFB 2000.
3 x	BGA-0246/0243
1 x	Flexible silicon discs
1 x	MICROMOT steel collet set
1 x	Solid carbide saw blade
1 x	Replacement belts for BSL 220/E
5 x	BeeProg2
1 x	Blade for Steel and brass
3 x	BGA-Bottom-111
1 x	MICROMOT Mains Adapter NG 2/E
3 x	BGA-Bottom-115
1 x	MICROMOT 50/EF
3 x	BeeHive208S
3 x	BGA-Bottom-1
1 x	Sanding fleece for LWS
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Mill/Drill System BFW 40/E
1 x	Replacement glue sticks for HKP 220
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT tool holder
2 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Super-Cut
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Sanding fleece for LWS
1 x	MICROFLAME burner MFB/E
1 x	Sanding bands 14x13mm
1 x	MICRO-screwdrivers
1 x	Super-fine sanding discs grain 000
3 x	BGA-Bottom-102
1 x	Rebating cutter 6.4mm
1 x	Microfibre cloth
2 x	BGA-0245/0243
3 x	BGA-0245/0242
1 x	Lambswool polishing disc
1 x	Replacement carving blades for MSG
1 x	Diamond blade
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Replacement belts for BSL 220/E
1 x	Diamond cutting blade for OZI
1 x	MICRO woodturning lathe DB 250
1 x	2-speed scroll saw DSH
1 x	Router base OFV
1 x	Corundum bound cutting disc for LWS
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Sanding bands 14x13mm
1 x	MICROMOT 50
1 x	sanding belts for BBS/s Grit 150
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Supercut jig saw blades of special steel
1 x	Jig saw blades made of HSS
1 x	Cutting disc, with reinforcement
1 x	HSS immersion saw blades for OZI
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Saw blade made of high-alloy special steel
1 x	Sanding Discs
1 x	MICROMOT 230/E
1 x	Diamond Cutting Discs
1 x	Protective device for hand-operated MICROMOT
1 x	Super-fine sanding discs grain 2000

€51,631.61