€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	Three-jaw steel drill chuck
1 x	Aluminium Die-Cast
1 x	IC Test clip 20 pins
1 x	Protective device for hand-operated MICROMOT
1 x	MICROMOT extension cord. 300cm.
1 x	MICROMOT steel collet set
1 x	Footswitch FS
1 x	Pinça SOIC de 8 pinos
1 x	MICROMOT drill stand MB 200
1 x	Dividing attachment TA 230 for PF 250
1 x	Mill/Drill Unit BFB 2000.
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	End side cutters EUROline-Conductive
2 x	Mini side cutters EUROline-Conductive
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Collet Set for accurate use on round components
2 x	sandpaper for PS 13 Grit 400
1 x	Mini side cutters EUROline-Conductive
1 x	sandpaper for PS 13 Grit 240
1 x	sanding belts for BBS/s Grit 240
1 x	End side cutters 45º EUROline-Conductive
2 x	sandpaper for PS 13 Grot 180
1 x	Side cutters EUROline-Conductive
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Centre Turning Attachment
1 x	Replacement glue sticks for HKP 220
1 x	Vacum SAA 901
2 x	Mini side cutters EUROline-Conductive
1 x	Gear Chuck
1 x	Four Jaw Chuck
1 x	14-piece parallel supports set
1 x	sanding belts for BBS/s Grit 150
1 x	BGA-0245/0242
1 x	6-piece set of ESD/EGB tweezers
1 x	BGA-Bottom-153
1 x	BGA-Bottom-15
1 x	BGA-Bottom-192
1 x	BGA-Bottom-125
1 x	BGA-Bottom-140
1 x	BGA-Bottom-222
1 x	BGA-Bottom-18
1 x	ACCENT SERVICE TOOLS SET
1 x	BGA-Bottom-157
1 x	BGA-Bottom-22
1 x	BGA-Bottom-180
1 x	Inspector mirror
1 x	BGA-0245/0241
1 x	BGA-Bottom-170
2 x	BGA-Bottom-115
1 x	BGA-Bottom-218
1 x	BGA-Bottom-135
1 x	Brass contact cleaner brush
1 x	BGA-Bottom-145
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	BGA-Bottom-14
1 x	BGA-Bottom-147
2 x	BGA-0246/0244
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	BGA-Bottom-19
1 x	Diamond-coated cutting disc for MIC
1 x	BGA-Bottom-132
1 x	BGA-Bottom-88
1 x	BGA-Bottom-216
1 x	BGA-Bottom-8
1 x	Glass fibre contact cleaner brush
1 x	IC tweezers
1 x	BGA-Bottom-191
1 x	BGA-Bottom-221
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	6-piece wrench key set ESD
1 x	Glass fibre contact cleaner brush
1 x	BGA-Bottom-224
1 x	BGA-Bottom-144
1 x	BGA-Bottom-177
1 x	BGA-Bottom-217
1 x	BGA-Bottom-174
1 x	BGA-Top-132 ZIF-CS
1 x	BGA-Bottom-16
1 x	BGA-Bottom-165
2 x	BGA-Bottom-1
1 x	BGA-Bottom-127
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x	BGA-0246/0243
1 x	BGA-Bottom-102
1 x	BGA-Bottom-138
1 x	Hand Magnifier 2-293
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-139
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	BGA-Top-3 ZIF-CS
2 x	Blade holders for DS 460
1 x	BGA-Bottom-164
1 x	BGA-Bottom-171
1 x	BGA-Bottom-105
1 x	BGA-Bottom-13
1 x	BGA-Bottom-5
2 x	BGA-Bottom-106
1 x	BGA-Bottom-150
1 x	BGA-Bottom-151
1 x	BGA-Bottom-9
1 x	BGA-Bottom-169
1 x	BGA-Bottom-126
1 x	EUROline-Conductive set of pliers
1 x	Floor cover ESD
2 x	BGA-Bottom-111
1 x	Hand magnifier with LED light 3X
1 x	BGA-Bottom-108
1 x	Inpection mirror 1-978
1 x	BGA-Bottom-223
1 x	BGA-Bottom-231
1 x	BGA-Bottom-146
1 x	BGA-Bottom-187
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BeeHive204
1 x	BGA-Bottom-131
2 x	BGA-Bottom-118
1 x	6-piece TORX-screwdriver-set ESD
1 x	Grinding mop cylinder grit 80
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-Bottom-141
1 x	BGA-Bottom-101
1 x	BGA-Bottom-103
1 x	BGA-Bottom-149
1 x	BGA-Bottom-166
1 x	BGA-Bottom-225
1 x	BGA-Bottom-167
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-173
1 x	Bottom PSOP44 NOR-1
1 x	BGA-Bottom-154
1 x	BGA-Bottom-10
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	BeeHive208S
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Solid carbide saw blade
1 x	Diamond blade
1 x	Saw blade made of high-alloy special steel

€25,675.82