€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	Silicon-Carbide.
1 x	Special Fused Alumina (Hardness N).
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Three-jaw steel drill chuck
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT steel collet set
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Supercut jig saw blades of special steel
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Micro Compound Table KT 70
1 x	End side cutters EUROline-Conductive
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	End side cutters 45º EUROline-Conductive
1 x	Independent four jaw chuck for the DB 250
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/BF
1 x	Polishing Set
1 x	Mini side cutters EUROline-Conductive
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	14-piece parallel supports set
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/P
1 x	Side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICROMOT extension cord. 300cm.
1 x	Mill/Drill Unit BFB 2000.
1 x	Blade holders for DS 460
2 x	BeeHive204
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Dividing attachment TA 230 for PF 250
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	MICROMOT tool holder
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	BGA-Bottom-180
1 x	BGA-Bottom-154
1 x	Grinding mop cylinder grit 240
1 x	BGA-Bottom-108
1 x	BGA-Bottom-139
1 x	BGA-Bottom-146
1 x	BGA-0246/0244
1 x	BGA-Bottom-111
1 x	BGA-Bottom-187
1 x	BGA-Bottom-165
1 x	BGA-Bottom-149
1 x	BeeHive208S
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BGA-Bottom-145
1 x	BGA-0245/0241
1 x	BGA-Bottom-132
1 x	Lathe System PD 400
1 x	BGA-0245/0242
1 x	Grinding mop cylinder grit 120
1 x	Wood Lathe DB900
1 x	Super-fine sanding discs grain 000
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Precision steel vice PM 40
1 x	BGA-Bottom-13
1 x	Beeprog2C
1 x	BGA-Bottom-105
1 x	BGA-Bottom-177
1 x	BGA-Bottom-164
1 x	Corundum fan sander for LWS
1 x	BGA-Bottom-15
1 x	Three piece thread cutting set
1 x	BGA-Bottom-157
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	BGA-Bottom-125
1 x	BGA-Bottom-18
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	BGA-Bottom-10
1 x	BGA-Bottom-140
1 x	BGA-Bottom-115
1 x	BGA-Bottom-127
1 x	Step clamps made of steel
1 x	Precision lathe PD 250/E
1 x	BGA-Bottom-174
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Machine Vice MS 4
1 x	BGA-0245/0243
1 x	BGA-Bottom-14
1 x	BGA-Bottom-103
1 x	BGA-0246/0243
1 x	BeeProg2
1 x	BGA-Bottom-173
1 x	Professional set for finish grinding and polishing
1 x	BGA-Bottom-170
1 x	BGA-Bottom-106
1 x	Grinding mop cylinder grit 80
1 x	BGA-Bottom-169
1 x	BGA-Bottom-101
1 x	Tungsten carbide cutters set
1 x	BGA-Bottom-167
1 x	6-piece screwdriver and cross-recess set
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	BGA-Bottom-144
1 x	Five piece HSS chisel set
1 x	BGA-Bottom-131
1 x	Three jaw chuck for the lathe DB 250
1 x	BGA-Bottom-11
1 x	BGA-Bottom-19
1 x	BGA-Bottom-171
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	BGA-Bottom-126
1 x	Wood Lathe DB450
1 x	BGA-Bottom-148
1 x	Cylinder sander WAS/E

€26,706.87