€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	sanding belts for BBS/s Grit 80
3 x	DIL20/PLCC20 ZIF-CS
3 x	DIL40/PLCC28 ZIF AWM-1
2 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1mm
1 x	High quality corundum grinding bits
1 x	Ball-shaped diamond coated 3.2mm
1 x	Replacement belts for BSL 220/E
1 x	High quality corundum grinding bits
1 x	Ball-shaped diamond coated 2.2mm
1 x	High quality corundum grinding bits
1 x	Motor-driven carving device MSG
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	Diamond Cutting Discs
1 x	MICRO shaper MP 400
2 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
3 x	DIL44/MLF44-1 ZIF-CS
1 x	High quality corundum grinding bits
1 x	Scroll saw DS 230/E
1 x	Diamond Grinding Bits 1,8mm
2 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
2 x	DIL20W/PLCC20 ZIF
2 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 5mm
1 x	Diamond Twist Drills
3 x	DIL28/PLCC28 ZIF
1 x	DIL48/PLCC84 ZIF PLD-4
1 x	High quality corundum grinding bits
1 x	Ball-shaped diamond coated 1.2mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Multiform grindstone
1 x	Independent four jaw chuck for the DB 250
1 x	Set of special steel cutters
1 x	Diamond blade
1 x	Ball shaped milling cutters
1 x	Tungsten carbide cutter 3.0mm
1 x	Cone shaped milling cutter
2 x	Jig saw STS 12/E
1 x	Solid carbide stylus for engraving
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutters set
1 x	Set of precision cutters
1 x	Cylindrical cutters
1 x	Tungsten carbide cutter 1.0mm
1 x	Crosscut 'Super-Cut' blade
1 x	Saw blade made of high-alloy special steel
1 x	Tungsten carbide cutter 2.0mm
1 x	Cylinder shaped milling cutters
1 x	Disc cutters
1 x	DIL48/MQFP80 ZIF C500
1 x	Solid carbide stylus for engraving
1 x	Flame shaped milling cutters
1 x	Wolfram vanadium steel milling bits
1 x	Surface planer AH 80
1 x	DIL48/PLCC84 ZIF PLD-3
1 x	Flap Wheels
1 x	DIL48/PLCC68 ZIF PLD-1
1 x	Sanding Drums
1 x	DIL48/PLCC84 ZIF PLD-2
1 x	Milling cutter set (6 - 10mm)
1 x	Delta sander OZI/E
1 x	DIL48/PLCC84 ZIF H8-1
1 x	DIL48/PLCC68 ZIF MCS51-2
1 x	DIL44/PLCC44 ZIF
1 x	DIL48/PLCC84 ZIF MCS196-2
1 x	MICRO woodturning lathe DB 250
1 x	DIL40/PLCC84 ZIF PIC-1
1 x	DIL48/PLCC68 ZIF MCS51-1
1 x	DIL40/PLCC68 ZIF PIC-1
1 x	Milling cutter set (2 - 5mm)
1 x	Sanding Discs
1 x	DIL48/PLCC68 ZIF MCS196-1
1 x	Nylon Fleece Brushes
2 x	10-piece wood router cutter set
1 x	Sanding Drums
1 x	Sanding bands 14x13mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL40/PLCC68 ZIF PIC-2
1 x	DIL48/PLCC52 ZIF-CS 68HC05BX
1 x	Sanding Drums
1 x	DIL48/PLCC84 ZIF PLD-1
1 x	DIL48/PLCC68 ZIF 68HC11
1 x	Sanding Discs
1 x	DIL48/PLCC68 ZIF MCS196-2
1 x	Sanding bands 14x13mm
1 x	Flap Wheels
1 x	DIL48/PLCC84 ZIF 68HC11
1 x	DIL44/PLCC44 ZIF-CS
1 x	Sanding Drums
1 x	DIL48/PLCC52 ZIF MCS196-1
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Rebating cutter 6.4mm
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	Bottom PSOP44 NOR-3
1 x	Fibre-Cut Discs
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	Fibre-Cut Discs
1 x	Glass fibre contact cleaner brush
1 x	Half round cutter 13mm
1 x	Slot cutter 3.2mm
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	Slot cutter 6.5mm
1 x	Combi cutter 6.5/2.5mm
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	Slot cutter 5.0mm
1 x	Core box bit 3.2mm
1 x	DIL28/PLCC28 ZIF-CS
1 x	Angle cutter 45 °
1 x	DIL32/PLCC32 ZIF
1 x	Metal Cutting Blades
1 x	V-slot cutter 6.5mm
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	Fibre-Cut Discs
1 x	Rounding over cutter 6.4mm
1 x	Replacement belts for BSL 220/E
1 x	Fibre-Cut Discs
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	BGA-Bottom-115
1 x	DIL48/TQFP64-2 ZIF ST7-1
1 x	BGA-Bottom-103
1 x	HSS twist drill set to DIN 338
1 x	BGA-Bottom-10
1 x	Grinding mop cylinder grit 80
1 x	BeeHive208S
1 x	Bottom PSOP44 NOR-1
1 x	BGA-Bottom-8
1 x	BGA-Top-5 ZIF-CS
1 x	HSS drill bits 1.0mm
1 x	BGA-Top-132 ZIF-CS
1 x	Felt polishers
1 x	BGA-Bottom-217
1 x	BGA-Bottom-223
1 x	Tungsten carbide drills Ø2mm
1 x	Flexible silicon discs
1 x	BGA-Bottom-222
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-231
1 x	BGA-Bottom-229
1 x	Flexible silicon discs
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	Cotton polishers
1 x	BeeHive204
1 x	BGA-Bottom-22
2 x	BeeProg2
1 x	BGA-Bottom-5
1 x	HSS twist drill set with centring pin
1 x	Cotton polishers
1 x	Flexible silicon discs
1 x	BGA-Bottom-108
1 x	Tungsten carbide drills Ø1mm
1 x	BGA-Bottom-11
1 x	BGA-Bottom-106
1 x	DIL48/TQFP64-2 ZIF HC908-2
1 x	HSS drill bits 0.8mm
1 x	Felt polishers
1 x	Cotton polishers
1 x	BGA-Bottom-9
1 x	BGA-0245/0242
1 x	BGA-Bottom-102
1 x	BGA-Bottom-218
1 x	Replacement belts for BSL 220/E
1 x	BGA-0245/0241
1 x	Flexible polishing pad set
1 x	BGA-Top-4 ZIF-CS
1 x	Flexible polishing pad set
2 x	Beeprog2C
1 x	HSS drill bits 1.2mm
1 x	Felt polishers
1 x	BGA-0246/0243
1 x	Polishing paste
1 x	Conjunto de três brocas de ponto
1 x	DIL48/TQFP64-1 ZIF ST7-1
1 x	BGA-0245/0243
1 x	HSS drill bits 0.5mm
1 x	BGA-Bottom-225
1 x	Tungsten carbide drills Ø1,5mm
1 x	BGA-Bottom-111
1 x	BGA-Bottom-221
1 x	Insulation Resistance Tester MG125
1 x	DIL48/TQFP64 ZIF MSC1210
1 x	BGA-Bottom-88
1 x	BGA-Bottom-216
1 x	HSS drill bits 1.6mm
1 x	MICROMOT drill stand MB 200
1 x	14-piece parallel supports set
1 x	Footswitch FS
1 x	Insert CCGT060202-AK
1 x	Micro Compound Table KT 70
1 x	Three-jaw steel drill chuck
1 x	Aluminium Die-Cast
1 x	DCGT 070202F-AL
1 x	Insert CCGT120404-AK

€30,400.78