€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Three jaw chuck for the lathe DB 250
1 x	Professional set for finish grinding and polishing
1 x	Super-fine sanding discs grain 400
1 x	Replacement glue sticks for HKP 220
2 x	Professional polishing sponge
1 x	Super-fine sanding discs grain 2000
1 x	Backing disc for LWS
1 x	Chuck for TBM 220
1 x	Super-fine sanding discs grain 000
2 x	Five piece HSS chisel set
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Diamond-coated cutting and roughing disc
1 x	Grinding mop cylinder grit 240
1 x	Pinça SOIC de 8 pinos
1 x	Independent four jaw chuck for the DB 250
1 x	Lambswool polishing disc
1 x	Collet chuck ER25 for D250X550
1 x	Tool holder type D for SWH 1-A
1 x	Collet chuck ER32 for D250X550
1 x	Face clamping disc for D250X550
1 x	machine base with shelves for D250X550
1 x	Quick-action tool holder kit SWH AA
1 x	Tool holder type H for SWH 1-A
1 x	Follow rest for D250X550
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Steady rest for D250X550
1 x	Lathe chuck flange for D250X550
1 x	Universal and oil siphoning pump AP 12
1 x	Grinding mop cylinder grit 120
1 x	Super safety and specialty bit set, 75-piece
2 x	Replacement belts for BSL 220/E
1 x	BeeHive204
1 x	BGA-0246/0243
1 x	BGA-Bottom-101
2 x	Lathe tools 10mm pastilhados
1 x	BGA-0246/0244
1 x	BGA-0245/0242
1 x	BGA-Bottom-108
1 x	BGA-Bottom-102
1 x	BGA-0245/0241
1 x	BeeHive208S
1 x	BGA-Bottom-11
1 x	BGA-Bottom-105
1 x	BGA-0245/0243
1 x	Beeprog2C
1 x	BGA-Bottom-106
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	BGA-Bottom-111
1 x	BGA-Bottom-103
1 x	BGA-Bottom-153
1 x	High quality corundum grinding bits
1 x	Cups brushes
1 x	BGA-Bottom-167
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Wheels brushes
1 x	Stainless steel cups
1 x	BGA-Bottom-154
1 x	Rounding over cutter 6.4mm
1 x	Router base OFV
1 x	High quality corundum grinding bits
1 x	Stainless steel wheels
1 x	BGA-Bottom-187
1 x	BGA-Bottom-171
1 x	Brass brushes
1 x	Steel cups
1 x	Steel wheels
1 x	High quality corundum grinding bits
1 x	Spare cutting wire
1 x	BGA-Bottom-169
1 x	Rebating cutter 6.4mm
1 x	Footswitch FS
1 x	BGA-Bottom-165

€17,540.50