€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Grinding mop cylinder grit 80
1 x	Grinding mop cylinder grit 240
1 x	Precision Vice FMS 75
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Grinding mop cylinder grit 120
1 x	Precision steel vice PM 40
1 x	Precision Vice FMZ
1 x	Corundum fan sander for LWS
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Multipurpose Vices Primus100
1 x	Diamond-coated cutting and roughing disc
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Machine Vice MS 4
1 x	Multipurpose Vices Primus 75
1 x	surface planing and thicknessing ADH 200
1 x	Vacum SAA 901
1 x	Table Saw TKS 2500 SC
1 x	Steel brushes
1 x	Brass brushes
1 x	Stainless steel brushes
1 x	Earth wire with dummy Schunko-plug
1 x	Belt sander BBS/S
1 x	Steel wheels
1 x	Cups brushes
1 x	Wheels brushes
1 x	Table Sawr TKS 315 E
1 x	Steel cups
1 x	Stainless steel wheels
1 x	Stainless steel cups
1 x	Wood Lathe DB450
1 x	surface planing and thicknessing ADH 250
1 x	Wood Lathe DB900
2 x	Precision drill grinder FBS 12/EF
1 x	Polishing paste
1 x	HSS twist drill set with centring pin
2 x	Hot wire cutter THERMOCUT 650
1 x	Conjunto de três brocas de ponto
1 x	Cotton polishers
1 x	Diamond Cutting Discs
1 x	Tungsten carbide drills Ø2mm
1 x	Milling cutter set (6 - 10mm)
1 x	Mini side cutters EUROline-Conductive
1 x	Milling cutter set (2 - 5mm)
1 x	Fibre-Cut Discs
1 x	Earth wire
1 x	Flexible polishing pad set
2 x	Long neck straight drill/grinder LB/E
1 x	Fibre-Cut Discs
1 x	Mini side cutters EUROline-Conductive
1 x	HSS drill bits 0.8mm
1 x	End side cutters EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	HSS drill bits 0.5mm
1 x	Fibre-Cut Discs
1 x	HSS drill bits 1.0mm
2 x	MICRO Miller FF 500
1 x	HSS drill bits 1.6mm
2 x	MICROMOT 50/E
1 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	Tungsten carbide drills Ø1,5mm
1 x	Diamond Cutting Discs
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Tungsten carbide drills Ø1mm
2 x	MICROMOT 230/E
1 x	HSS twist drill set to DIN 338
1 x	Felt polishers
1 x	HSS drill bits 1.2mm
1 x	End side cutters 45º EUROline-Conductive
2 x	Precision Drill/Grinder FBS 240/E
1 x	Fibre-Cut Discs
1 x	Flexible silicon discs
1 x	Diamond Cutting Discs
1 x	Metal Cutting Blades
2 x	MICROMOT 50/EF
1 x	Fibre-Cut Discs
1 x	EUROline-Conductive set of pliers
1 x	Cotton polishers
1 x	Flexible polishing pad set
2 x	Mill/Drill System BFW 40/E
2 x	MICROMOT 50
1 x	Mini side cutters EUROline-Conductive
1 x	Flexible silicon discs
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	ESD Brushe
1 x	Felt polishers
1 x	Round nose pliers 45º EUROline-Conductive
2 x	Professional Drill/Grinder IBS/E
1 x	Cotton polishers
1 x	Felt polishers
4 x	Slot cutter 5.0mm
4 x	Rebating cutter 6.4mm
4 x	V-slot cutter 6.5mm
4 x	Slot cutter 6.5mm
2 x	Diamond blade
3 x	MICROMOT Mains Adapter NG 2/E
4 x	MICROMOT Mains Adapter NG 2/S
4 x	Core box bit 3.2mm
4 x	Edge cutter with pin 6.4mm
3 x	Super-fine sanding discs grain 2000
4 x	Rounding over cutter 6.4mm
3 x	Backing disc for LWS
3 x	Microfibre cloth
3 x	Lambswool polishing disc
2 x	Saw blade made of high-alloy special steel
3 x	Angle cutter 45 °
3 x	Professional set for finish grinding and polishing
3 x	Super-fine sanding discs grain 000
1 x	Corundum sanding discs for LWS
1 x	Long neck angle milling/drilling unit LWB 220/E
2 x	Crosscut 'Super-Cut' blade
3 x	Slot cutter 3.2mm
1 x	Set of special steel cutters
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Ball shaped milling cutters
1 x	Cylindrical cutters
1 x	PRECISION WIRE STRIPPER ESD-PLUS
3 x	Super-fine sanding discs grain 400
1 x	Cylinder shaped milling cutters
1 x	Disc cutters
2 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Tungsten tipped saw blade
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Solid carbide stylus for engraving
1 x	Broca de alta duração de 2.6mm
3 x	Professional polishing sponge
1 x	Broca de alta duração de 2.1mm
1 x	Conj 5 pinças ESD
1 x	Solid carbide stylus for engraving
1 x	Tungsten carbide cutter 3.0mm
1 x	Wolfram vanadium steel milling bits
1 x	Set of precision cutters
1 x	Broca de alta duração de 3.0mm
1 x	Broca de alta duração de 2.9mm
1 x	Broca de alta duração de 2.7mm
1 x	Wolfram vanadium steel milling bits
1 x	Combi cutter 6.5/2.5mm
1 x	Broca de alta duração de 2.4mm
1 x	Broca de alta duração de 2.3mm
1 x	Broca de alta duração de 2.2mm
1 x	Tungsten carbide cutter 1.0mm
1 x	Flame shaped milling cutters
1 x	Cone shaped milling cutter
1 x	Long neck angle grinder LHW
1 x	Half round cutter 13mm
1 x	Tungsten carbide cutters set
1 x	Tungsten carbide cutter 2.0mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Polishing felt, medium hard
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-115
1 x	BGA-Bottom-167
1 x	BGA-Bottom-166
1 x	BGA-Bottom-169
1 x	BGA-0245/0243
1 x	BGA-Bottom-173
1 x	BGA-Bottom-102
1 x	BGA-Bottom-11
1 x	BGA-Bottom-125
1 x	BGA-Bottom-157
1 x	BGA-Bottom-165
1 x	BGA-Bottom-106
1 x	BGA-Bottom-151
1 x	BeeHive208S
1 x	BGA-Bottom-164
1 x	BGA-Bottom-101
1 x	BGA-Bottom-103
1 x	BGA-Bottom-10
1 x	BGA-Bottom-18
1 x	BGA-Bottom-187
1 x	BGA-Bottom-108
1 x	BGA-0245/0241
1 x	BGA-Bottom-19
1 x	BGA-Bottom-150
1 x	BGA-Bottom-118
1 x	BGA-0246/0243
1 x	BGA-Bottom-105
1 x	BGA-Bottom-153
1 x	BGA-0245/0242
1 x	BGA-Bottom-177
1 x	BGA-Bottom-16
1 x	BGA-Bottom-180
1 x	BGA-Bottom-171
1 x	BGA-Bottom-174
1 x	BeeHive204
1 x	BGA-Bottom-1
1 x	BGA-0246/0244
1 x	BGA-Bottom-170
1 x	BGA-Bottom-154

€28,580.18