€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
eight independent universal programming modules (BeeProg2 based) in one unit
extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
powerful independent pin-driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
graphics control unit with touch screen
very low voltage support for the latest Flash memory chips
ESD protection on each pin of the sockets
no adapter required for any DIL devices
Windows XP Embedded driven control PC internal to the programmer
unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Universal polishing paste
1 x	Universal and oil siphoning pump AP 12
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Footswitch FS
2 x	PLCC Extractor
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	MICROMOT extension cord. 300cm.
2 x	Band knife of hardened spring band steel (without teeth)
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	Four Jaw Chuck
2 x	MICROMOT tool holder
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	Bench drill machine TBM 220
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	DIL28/PLCC28 ZIF
1 x	DIL48/QFP100 ZIF NEC-1
1 x	Half round cutter 13mm
2 x	Angle cutter 45 °
1 x	DIL20/PLCC20 ZIF-CS
1 x	Bottom PSOP44 NOR-2
2 x	Aluminium Die-Cast
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	Rebating cutter 6.4mm
1 x	DIL48/QFP100 ZIF PLD-1
1 x	Fixed Steady
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Combi cutter 6.5/2.5mm
1 x	Collet Set for accurate use on round components
1 x	DIL32/PLCC32 ZIF-CS
1 x	MICROMOT drill stand MB 200
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	DIL48/QFP100 ZIF NEC-2
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Blade holders for DS 460
1 x	DIL40/PLCC52 ZIF AWM-1
2 x	Mill/Drill Unit BFB 2000.
1 x	Slot cutter 6.5mm
1 x	Five piece HSS chisel set
1 x	Ball-shaped diamond coated 1.2mm
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
2 x	Three-jaw steel drill chuck
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Three jaw chuck for the lathe DB 250
1 x
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	DIL40/QFP144 ZIF H8S-1
2 x	10-piece wood router cutter set
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Slot cutter 5.0mm
1 x	Slot cutter 3.2mm
1 x	Dividing attachment TA 230 for PF 250
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	DIL28/PLCC28 ZIF-CS
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	Belt sander BS/E
1 x	DIL20W/PLCC20 ZIF
1 x	DIL48/QFP100 ZIF PLD-2
1 x	Belt sander BBS/S
2 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/P
2 x	MICROMOT steel collet set
1 x	Gear Chuck
1 x	Bench Circular Saw KS 230
1 x	DIL40/QFP144 ZIF LPC-1
1 x	Ball shaped milling cutters
1 x	Tool holder for rotary tools
1 x	DIL48/QFP100 ZIF PLD-3
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL40/QFP100 ZIF AVR-1
1 x	Backing disc for LWS
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	Ball-shaped diamond coated 2.2mm
1 x	DIL32/PLCC32 ZIF
2 x	Blade for Steel and brass
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Flexishaft MICROMOT 110/BF
1 x	DIL48/QFP100 ZIF PLD-4
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	DIL40/QFP80 ZIF M37702
1 x	14-piece parallel supports set
1 x	BeeHive204
1 x	BGA-Bottom-194
1 x	BGA-Bottom-125
1 x	BGA-Bottom-102
1 x	Screwdriver 2.0
1 x	Screwdriver 1.2
1 x	BGA-Bottom-217
1 x	BGA-Bottom-101
1 x	Diamond blade for MBS 240/E
1 x	BGA-Bottom-199
1 x	BGA-0245/0243
1 x	BGA-Bottom-108
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	BGA-Bottom-20
1 x	BGA-Bottom-211
1 x	Screwdriver 5.5
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	BGA-Bottom-204
1 x	BGA-Bottom-118
1 x	BGA-0245/0242
1 x	BGA-Bottom-2
1 x	BGA-Bottom-195
1 x	BGA-Bottom-115
1 x	BGA-Bottom-11
1 x	PLCC Puller
1 x	BGA-Bottom-196
1 x	Screwdriver 2.5
1 x	Fluted filter for CW-matic
1 x	Broca de alta duração de 2.3mm
1 x	BeeHive208S
1 x	Screwdriver 5.5
1 x	BGA-Bottom-209
1 x	BGA-Bottom-212
1 x	Screwdriver 3.0
1 x	BGA-Bottom-111
1 x	BGA-0246/0243
1 x	BGA-Bottom-1
1 x	BGA-0245/0241
1 x	BGA-Bottom-198
1 x	BGA-Bottom-202
1 x	Screwdriver 1.8
1 x	BGA-Bottom-201
1 x	ESD Brushe

€24,157.25