€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	Diamond-coated cutting and roughing disc
2 x	Nylon Fleece Brushes
2 x	Flap Wheels
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Flap Wheels
2 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Blade holders for DS 460
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
3 x	Fixed Steady
2 x	Supercut jig saw blades of special steel
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Tool holder for rotary tools
2 x	Sanding bands 14x13mm
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Felt polishers
2 x	Blade for Steel and brass
2 x	Jig saw blades made of HSS
2 x	Sanding Drums
2 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Band knife of hardened spring band steel (without teeth)
2 x	Coarse-toothed (10 TPI per 25mm)
2 x	Diamond blade for MBS 240/E
1 x	Precision caliper square
3 x	Fibre-Cut Discs
1 x	Felt polishers
1 x	Broca de ponto 8.00 x 3.15
1 x	Revolving center with replacement lathe centers
1 x	BGA-Bottom-141
1 x	BGA-Bottom-144
2 x	Steel brushes
5 x	BeeHive204
2 x	BGA-Bottom-192
1 x	BGA-Bottom-127
1 x	BGA-Bottom-204
1 x	BGA-Bottom-201
1 x	BGA-Bottom-211
1 x	BGA-Bottom-135
1 x	Broca de ponto 5.00 x 2.00
2 x	BGA-Bottom-191
1 x	BGA-Bottom-13
1 x	BGA-Bottom-15
1 x	BGA-Bottom-202
1 x	quantum revolving center CM1
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	BGA-Bottom-199
1 x	Broca de ponto 6.30 x 2.50
1 x	BGA-Bottom-20
1 x	BGA-Bottom-140
1 x	BGA-Bottom-21
1 x	Broca de ponto 3.15 x 1.00
1 x	MICRO Miller FF 230
2 x	quantum revolving center CM2
2 x	Cups brushes
1 x	BGA-Bottom-198
1 x	BGA-Bottom-139
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	BGA-Bottom-147
3 x	Fibre-Cut Discs
1 x	BGA-Bottom-215
1 x	BGA-Bottom-212
3 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	BGA-Bottom-149
1 x	BGA-Bottom-126
1 x	BGA-Bottom-131
1 x	BGA-Bottom-208
1 x	BGA-Bottom-138
1 x	BGA-Bottom-2
1 x	BGA-Bottom-132
3 x	BGA-Bottom-125
1 x	BGA-Bottom-214
1 x	BGA-Bottom-194
1 x	BGA-Bottom-209
2 x	Wheels brushes
3 x	Fibre-Cut Discs
1 x	BGA-Bottom-145
2 x	Stainless steel wheels
1 x	BGA-Bottom-196
1 x	BGA-Bottom-207
1 x	BGA-Bottom-195
3 x	Diamond Cutting Discs
1 x	BGA-Bottom-14
1 x	BGA-Bottom-146
1 x	Conjunto de três brocas de ponto
3 x	Diamond Cutting Discs
3 x	Fibre-Cut Discs
1 x	BGA-Bottom-148
1 x	Broca de ponto 3.15 x 1.25
2 x	Steel wheels
1 x	Stainless steel brushes
2 x	BGA-Bottom-111
1 x	Broca de alta duração de 2.1mm
3 x	TU 2004V
2 x	BGA-Bottom-102
3 x	BGA-Bottom-103
1 x	Broca de alta duração de 2.5mm
1 x	Broca de alta duração de 1.2mm
1 x	Corundum bound cutting disc for LWS
1 x	Broca de alta duração de 0.5mm
1 x	Broca de alta duração de 1.3mm
1 x	Broca de alta duração de 0.8mm
2 x	TU 1503V
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 2.4mm
1 x	Broca de alta duração de 1.1mm
2 x	Gear Chuck
3 x	BGA-Bottom-106
1 x	Beeprog2C
2 x	BGA-0245/0243
2 x	TU 2404
1 x	Broca de alta duração de 1.4mm
3 x	BGA-0246/0244
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 0.4mm
2 x	BGA-Bottom-115
1 x	broca de alta duração de 0,6mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Broca de alta duração de 2.3mm
1 x	Broca de alta duração de 0.7mm
1 x	Broca de alta duração de 1.5mm
3 x	BGA-Bottom-105
3 x	BGA-Bottom-11
3 x	BGA-0246/0243
1 x	Broca de alta duração de 2.0mm
1 x	BeeProg2
1 x	Broca de alta duração de 0.3mm
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	Four Jaw Chuck
1 x	broca de alta duração de 0,2mm
1 x	Scroll saw DS 230/E
1 x	Diamond Cutting Discs
3 x	BGA-Bottom-10
1 x	Blade guides separately
1 x	Insulation Resistance Tester MG500
2 x	Metal Cutting Blades
2 x	BGA-0245/0241
1 x	BGA-Bottom-8
1 x	BGA-Bottom-222
1 x	Spare cutting wire
1 x	BGA-Bottom-157
1 x	BGA-Bottom-167
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-171
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Grinding mop cylinder grit 80
1 x	BGA-Bottom-169
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	BGA-Bottom-9
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-165
1 x	BGA-Bottom-154
1 x	BGA-Bottom-180
1 x	BGA-Bottom-18
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	BGA-Bottom-19
1 x	BGA-Bottom-118
1 x	BGA-Bottom-217
1 x	BGA-Bottom-231
1 x	Diamond Cutting Discs
1 x	Fine dust paper filter for CW-matic
1 x	High quality corundum grinding bits
1 x	Fibre-Cut Discs
1 x	BGA-Bottom-229
1 x	Precision lathe PD 250/E
1 x	BGA-Bottom-173
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Top-132 ZIF-CS
1 x	BGA-Bottom-88
1 x	BGA-Top-4 ZIF-CS
2 x	BeeHive208S
1 x	Fibre-Cut Discs
1 x	BGA-Bottom-16
1 x	Centre Turning Attachment
1 x	BGA-Bottom-224
1 x	Three jaw chuck for the lathe DB 250
1 x	Fluted filter for CW-matic
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-1
1 x	BGA-Bottom-221
1 x	BGA-Bottom-216
1 x	BGA-Bottom-5
1 x	Collet Set for accurate use on round components
1 x	BGA-0245/0242
1 x	BGA-Bottom-108
1 x	BGA-Bottom-164
1 x	BGA-Bottom-22
1 x	Five piece HSS chisel set
1 x	BGA-Bottom-170
1 x	Footswitch FS
1 x	Lathe tools 10mm pastilhados

€63,910.93