€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

2 x	BGA-Bottom-105
1 x	Tungstein carbide rasp - and cutting disc
1 x	HSS boring tool set, 6 pieces
1 x	Three piece thread cutting set
1 x	Corundum fan sander for LWS
1 x	BeeHive204
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-125
1 x	BGA-Bottom-118
1 x	Angle polisher WP/E
1 x	Cotton polishers
1 x	BGA-0245/0242
1 x	BGA-0246/0243
1 x	Flap Wheels
1 x	Broca de alta duração de 0.8mm
1 x	2-speed scroll saw DSH
1 x	Cups brushes
2 x	BGA-Bottom-106
1 x	Angle cutter 45 °
1 x	BeeProg2
1 x	Grinding mop cylinder grit 120
1 x	Universal and oil siphoning pump AP 12
2 x	BGA-Bottom-102
1 x	Pensander PS 13
2 x	BGA-Bottom-103
2 x	BGA-0246/0244
2 x	BGA-Bottom-1
1 x	Bench Circular Saw KS 230
1 x	Precision lathe PD 250/E
1 x	sanding belts for BBS/s Grit 240
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	BGA-Bottom-111
1 x	Centre Turning Attachment
1 x	BGA-Bottom-127
1 x	broca de alta duração de 0,6mm
1 x	Cylinder shaped milling cutters
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Three jaw chuck for the lathe DB 250
1 x	Core box bit 3.2mm
1 x	BGA-Bottom-115
1 x	Chuck for TBM 220
1 x	Belt sander BS/E
1 x	BGA-0245/0243
1 x	Cutting disc, with reinforcement
1 x	Backing disc for LWS
1 x	Tungsten Carbide Tipped (TCT)
1 x	Corundum fan sander for LWS
2 x	BGA-Bottom-108
1 x	BGA-Bottom-126
1 x	Ball-shaped diamond coated 1.2mm
1 x	Step clamps made of steel
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Corundum sanding discs for LWS
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Blade for Steel and brass
1 x	Three-jaw steel drill chuck
1 x	Cut off/mitre saw KGS 80
2 x	BGA-Bottom-101
2 x	Lathe System PD 400
1 x	Engraving tool GG
1 x	Dividing attachment TA 230 for PF 250
2 x
1 x	Belt sander BBS/S
1 x	Corundum grinding disc for LWS

€15,222.08