€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Diamond Grinding Bits 1mm
2 x	Diamond Cutting Discs
3 x	sandpaper for PS 13 Grit 400
1 x	BGA-Bottom-145
2 x	Micro Compound Table KT 70
2 x	Diamond Cutting Discs
2 x	Diamond Cutting Discs
2 x	Sanding pads for OZI 220/E grit 240
1 x	Ball-shaped diamond coated 2.2mm
1 x	BGA-Bottom-131
3 x	Independent four jaw chuck for the DB 250
3 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Diamond Grinding Bits 1,8mm
1 x	BGA-Bottom-148
3 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Diamond Twist Drills
2 x	Chuck for TBM 220
1 x	Diamond Grinding Bits 5mm
1 x	Ball-shaped diamond coated 3.2mm
2 x	HSS immersion saw blades for OZI
1 x	BGA-Bottom-139
1 x	BGA-Bottom-144
1 x	Ball-shaped diamond coated 1.2mm
1 x	BGA-Bottom-13
1 x	BGA-Bottom-146
1 x	BGA-Bottom-132
1 x	BGA-Bottom-125
1 x	Delta sander OZI/E
1 x	BGA-Bottom-149
3 x	Bandsaw blade of bimetal for MBS 240/E
1 x	BGA-Bottom-118
1 x	BGA-Bottom-15
3 x	Blade for Steel and brass
2 x	HSS immersion saw blades for OZI
1 x	BGA-Bottom-127
3 x	Diamond blade for MBS 240/E
3 x	Blade for Wood and Plastics
2 x	Diamond Cutting Discs
1 x	BGA-Bottom-140
1 x	Polishing machine PM 100
1 x	Diamond Grinding Bits 1,8mm
2 x	Disc Sander TG 250/E
1 x	BGA-Bottom-138
1 x	BGA-Bottom-135
1 x	Belt sander BS/E
1 x	BGA-Bottom-147
1 x	BGA-Bottom-141
1 x	BGA-Bottom-14
1 x	BGA-Bottom-126
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	Set of special steel cutters
1 x	Felt polishers
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Fibre-Cut Discs
1 x	Wrench Keys 1.3
1 x	Tungsten carbide cutter 3.0mm
1 x	ESD-handling ser 9-361
1 x	Metal Cutting Blades
1 x	Felt polishers
1 x	Socket Wrenches 2.5
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Fibre-Cut Discs
1 x	ESD Tweezers 5-193
1 x	ESD Tweezers 5-192
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Solid carbide stylus for engraving
1 x	Ball shaped milling cutters
1 x	Wrench Keys 1.5
1 x	Tungsten carbide cutter 2.0mm
2 x	Blade guides separately
1 x	Flexible polishing pad set
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Socket Wrenches 3.2
1 x	Cylindrical cutters
1 x	Tungsten carbide cutter 1.0mm
1 x	High quality corundum grinding bits
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Fibre-Cut Discs
3 x	Silicon-Carbide.
1 x	High quality corundum grinding bits
1 x	ESD Brushe
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Crimping plier for BNC
1 x	Socket Wrenches 1.5
1 x	Cone shaped milling cutter
1 x	DIL28/PLCC28 ZIF
1 x	DIL28/PLCC28 ZIF-CS
1 x	Socket Wrenches 5.5
1 x	Bottom PSOP44 NOR-2
1 x	DIL20/PLCC20 ZIF-CS
1 x	Socket Wrenches 4.5
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Solid carbide stylus for engraving
1 x	Felt polishers
1 x	Disc cutters
1 x	Wrench Keys 0.9
1 x	DIL24/QSOP24 ZIF 150mil
1 x	High quality corundum grinding bits
1 x	ESD Brushe
3 x	Grinding mop cylinder grit 120
1 x	Cotton polishers
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Socket Wrenches 2.0
1 x	Conj 5 pinças ESD
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Flexible silicon discs
1 x	Fibre-Cut Discs
1 x	Bottom PSOP44 NOR-3
1 x	Fibre-Cut Discs
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	Flexible polishing pad set
1 x	Flexible silicon discs
1 x	High quality corundum grinding bits
1 x	Fibre-Cut Discs
1 x	Flexible silicon discs
1 x	Wolfram vanadium steel milling bits
1 x	Flame shaped milling cutters
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Socket Wrenches 4.0
1 x	ESD Tweezers 5-195
1 x	Cylinder shaped milling cutters
1 x	Polishing paste
1 x	DIL20W/PLCC20 ZIF
1 x	High quality corundum grinding bits
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	Cotton polishers
1 x	End side cutters EUROline-Conductive
1 x	Socket Wrenches 5.0
1 x	Set of precision cutters
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Wrench Keys 0.7
1 x	Felt polishers
1 x	Cotton polishers
1 x	Contact bracelet with spiral cord
1 x	Tungsten carbide cutters set
3 x	Special Fused Alumina (Hardness N).
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Socket Wrenches 3.5
1 x	Wolfram vanadium steel milling bits
1 x	ESD Tweezers 5-191
1 x	High quality corundum grinding bits
1 x	MICROMOT Mains Adapter NG 2/E
1 x	ESD Tweezers 5-194
2 x	BeeProg2
1 x	ESD-handling set
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Socket Wrenches 3.0
2 x	Gear Chuck
2 x	Corundum fan sander for LWS
2 x	Grinding mop cylinder grit 120
2 x	Fixed Steady
2 x	Tool holder for rotary tools
2 x	Precision Vice FMS 75
1 x	Multipurpose Vices Primus 75
1 x	Wheels brushes
1 x	Replacement carving blades for MSG
2 x	Precision Vice FMZ
2 x	Tungstein carbide rasp - and cutting disc
2 x	Professional set for finish grinding and polishing
1 x	Precision lathe PD 250/E
1 x	Stainless steel brushes
1 x	Brass brushes
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	Stainless steel wheels
2 x	Polishing Set
1 x	Sanding pads for OZI 220/E grit 80
1 x	Stainless steel cups
1 x	Precision steel vice PM 40
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Diamond-coated cutting and roughing disc
1 x	Milling cutter set (6 - 10mm)
1 x	Milling cutter set (2 - 5mm)
1 x	Steel brushes
1 x	Collet Set for accurate use on round components
1 x	Three jaw chuck for the lathe DB 250
2 x	Centre Turning Attachment
1 x	Five piece HSS chisel set
2 x	Machine Vice MS 4
1 x	Cups brushes
2 x	Grinding mop cylinder grit 80
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Grinding mop cylinder grit 240
1 x	Diamond cutting blade for OZI
1 x	Steel wheels
1 x	Steel cups
1 x	BGA-Bottom-204
1 x	BGA-Bottom-19
1 x	Nylon Fleece Brushes
1 x	BGA-Bottom-153
1 x	BGA-Bottom-16
1 x	MICROMOT Mains Adapter NG 2/S
1 x	BGA-Bottom-196
1 x	BGA-Bottom-167
1 x	BGA-Bottom-217
1 x	BGA-Bottom-164
1 x	Multipurpose Vices Primus100
1 x	BGA-Bottom-201
1 x	HSS drill bits 1.0mm
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Sanding Drums
1 x	BGA-Bottom-171
1 x	Flap Wheels
1 x	Sanding bands 14x13mm
1 x	Grinding and Polishing Machine SP/E
1 x	BGA-Bottom-173
1 x	BGA-Bottom-177
1 x	BGA-Bottom-170
1 x	HSS drill bits 0.8mm
1 x	BGA-Bottom-199
1 x	Sanding bands 14x13mm
1 x	BIT-SET
1 x	6-piece screwdriver set ESD
1 x	Four Jaw Chuck
1 x	BGA-Bottom-211
1 x	BGA-Bottom-18
1 x	BGA-Bottom-212
1 x	HSS drill bits 1.6mm
1 x	BGA-Bottom-154
1 x	Cutting disc, with reinforcement
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Conjunto de três brocas de ponto

€14,608.01