€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Shopping Cart

4 x	IC Test clip 20 pins
2 x	Precision caliper square
3 x	Pinça SOIC de 8 pinos
1 x	Crimping plier for BNC
3 x	Lambswool polishing disc
1 x	Glass fibre contact cleaner brush
1 x	IC tweezers
3 x	Microfibre cloth
3 x	Grinding mop cylinder grit 240
3 x	MICROMOT glue gun HKP 220
2 x	End side cutters 45º EUROline-Conductive
2 x	Side cutters EUROline-Conductive
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Glass fibre contact cleaner brush
1 x	Hand Magnifier 2-293
3 x	MICRO Heat gun MH 550
3 x	Super-fine sanding discs grain 2000
1 x	Three piece thread cutting set
1 x	Hand magnifier with LED light 3X
3 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	End side cutters EUROline-Conductive
3 x	Mini side cutters EUROline-Conductive
1 x	Inpection mirror 1-978
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x	Flat nose pliers 45º EUROline-Conductive
1 x	Inspector mirror
3 x	MICROFLAM gas soldering set MGS
2 x	Router base OFV
2 x	MICROFLAME burner MFB/E
2 x	Compact workshop vacuum cleaner CW-matic
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Universal holder UHZ
2 x	Professional polishing sponge
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Engraving tool GG
4 x	Super-fine sanding discs grain 000
2 x	BIT-SET
1 x	6-piece TORX-screwdriver-set ESD
1 x	Cross-recess Screwdrivers 0
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Mini side cutters EUROline-Conductive
1 x	ESD-handling ser 9-361
2 x	6-piece screwdriver set ESD
1 x	6-piece set of ESD/EGB tweezers
1 x	6-piece socket wrenches ESD
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Brass contact cleaner brush
1 x	Super-fine sanding discs grain 400
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	ESD-handling set
1 x	6-piece wrench key set ESD
1 x	Backing disc for LWS
1 x	Professional set for finish grinding and polishing
3 x	Footswitch FS
1 x	TU 2004V
2 x	Machine Vice MS 4
1 x	TU 2404
1 x	Dial gauge
3 x	MICRO Band Saw MBS 240/E
1 x	Lever Dial Indicator
1 x	TU 1503V
2 x	Hot wire cutter THERMOCUT 12/E
2 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	magnetic base 80kg
2 x	Bench Circular Saw KS 230
2 x	MICRO woodturning lathe DB 250
1 x	Precision Vice FMS 75
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	sanding belts for BBS/s Grit 80
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	Multiform grindstone
1 x	Thicknesser DH 40
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Table Saw FET
1 x	Surface planer AH 80
1 x	Precision steel vice PM 40
3 x	Floor cover ESD
1 x	MICRO shaper MP 400
1 x	DIL48/SSOP48 ZIF 300mil
1 x	Precision lathe PD 250/E
1 x	Lathe System PD 400
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Mini side cutters EUROline-Conductive
1 x	Solid carbide saw blade
2 x	Diamond blade
1 x	Saw blade made of high-alloy special steel
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Tungsten tipped saw blade
1 x	MICROMOT drill stand MB 200
1 x	MICROMOT Mains Adapter NG 2/S
1 x	BGA-Bottom-214
1 x	BGA-Bottom-195
1 x	BGA-Bottom-216
1 x	BGA-Bottom-212
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	BGA-Bottom-196
1 x	BGA-Bottom-217
1 x	BGA-Bottom-208
1 x	BGA-Bottom-207
1 x	BGA-Bottom-204

€15,399.95