€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	4-jaw chuck individually clamping 100mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Bench Circular Saw KS 230
2 x	Corundum bound cutting disc for LWS
1 x	CM2 - B16 - M10
1 x	Broca de alta duração de 1.5mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	3-jaw chuck centrically clamping 100mm
1 x	Blade holders for DS 460
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Morse taper MT2 - B16
1 x	4-jaw chuck individually clamping 80mm
1 x	Polishing felt, medium hard
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	3-jaw chuck centrically clamping 80mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	MICROMOT drill stand MB 200
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	3-jaw chuck centrically clamping 160mm
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	centrically clamping 125mm
1 x	Diamond Cutting Discs
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Felt polishers
1 x	centrically clamping 100mm
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	TOP-PIN 200ml
1 x	Special Fused Alumina (Hardness N).
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Jig saw STS 12/E
1 x	Tungsten Carbide Tipped (TCT)
1 x	4-jaw chuck individually clamping 125mm
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	VASELINE 200ml
2 x	Diamond Cutting Discs
2 x	Fibre-Cut Discs
1 x	Router base OFV
1 x	Diamond Cutting Discs
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	SCREEN 200ml
1 x	Three piece thread cutting set
1 x	Three jaw chuck for the lathe DB 250
1 x	Fibre-Cut Discs
1 x	Warding files set, 6pcs
1 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
1 x	Machine Vice MS 4
1 x	Metal Cutting Blades
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
3 x	BGA-0245/0243
1 x	DIL48/MQFP80 ZIF C500
2 x	DIL32/SDIP32 ZIF 400mil
1 x	BGA-Bottom-2
1 x	BGA-Bottom-211
1 x	Screwdriver 4.0
2 x	DIL42/SDIP42 ZIF 600mil
1 x	BGA-Bottom-209
1 x	BGA-Bottom-201
3 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	BGA-Bottom-191
2 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
2 x	BGA-0246/0244
1 x	BGA-Bottom-20
1 x	BGA-Bottom-212
2 x	DIL40/MQFP52 ZIF ADuC812
1 x	Solid carbide stylus for engraving
1 x	BGA-Bottom-202
1 x	BGA-Bottom-196
1 x	BGA-Bottom-195
1 x	Steel tape measure
1 x	BGA-Bottom-199
1 x	Screwdriver 1.2
1 x	BGA-Bottom-194
1 x	BGA-Bottom-215
1 x	DIL32/SDIP64 ZIF H8-1
1 x	BGA-Bottom-125
3 x	DIL40/SDIP52 ZIF 55x
1 x	BGA-Bottom-204
1 x	Corundum grinding disc for LWS
2 x	BGA-0245/0241
1 x	DIL48/MQFP80 ZIF C164
3 x	BGA-0245/0242
1 x	Bench drill machine TBM 220
1 x	Screwdriver 1.8
2 x	BGA-Bottom-111
1 x	BGA-Bottom-192
1 x	EUROline-Conductive set of pliers
1 x	Screwdriver 0.8
1 x	Screwdriver 2.0
1 x	Screwdriver 5.5
3 x	BGA-Bottom-1
1 x	BGA-Bottom-118
1 x	BGA-Bottom-207
1 x	Flexishaft MICROMOT 110/P
1 x	PRINTER 200ml
1 x	BGA-Bottom-105
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-Bottom-148
1 x	BGA-Bottom-167
1 x	BGA-Bottom-171
1 x	BGA-Bottom-127
1 x	BGA-Bottom-138
1 x	BGA-Bottom-10
1 x	BGA-Bottom-187
2 x	TORX-screwdrivers T4
1 x	BGA-Bottom-146
1 x	Bottom PSOP44 NOR-1
1 x	Bottom PSOP44 NOR-3
1 x	Beeprog2C
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	BGA-Bottom-166
1 x	BGA-Bottom-13
1 x	BGA-Bottom-145
1 x	BGA-Bottom-229
1 x	BGA-Bottom-164
2 x	BeeHive204
1 x	BGA-Bottom-14
1 x	TORX-screwdrivers T7
1 x	BGA-Bottom-132
1 x	Half round cutter 13mm
1 x	BGA-Bottom-15
1 x	BGA-Bottom-149
1 x	BGA-0246/0243
2 x	BGA-Bottom-151
1 x	BGA-Bottom-150
1 x	BGA-Bottom-16
1 x	BGA-Bottom-222
1 x	BGA-Bottom-140
1 x	BGA-Bottom-18
1 x	TORX-screwdrivers T6
1 x	BGA-Bottom-224
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-147
1 x	TORX-screwdrivers T5
2 x	TORX-screwdrivers T8
1 x	BGA-Bottom-102
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)

€23,573.51