€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Cutter head for copy and surface milling MT2
1 x	Sanding Discs
1 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
1 x	Flap Wheels
1 x	Fibre-Cut Discs
1 x	Sanding Drums
1 x	Sanding Drums
1 x	Tungsten carbide cutters set
1 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	Sanding Drums
1 x	Sanding Discs
1 x	Fibre-Cut Discs
2 x	End milling cutter kit HSS 12 pcs
1 x	Flap Wheels
1 x	Metal Cutting Blades
1 x	Nylon Fleece Brushes
1 x	Sanding bands 14x13mm
1 x	End milling cutter kit HSS 20 pcs
1 x	Diamond Cutting Discs
1 x	Diamond Cutting Discs
1 x	DIL16/SOIC16 ZIF 200 mil
2 x	Lathe tools 10mm pastilhados
1 x	Wolfram vanadium steel milling bits
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	Set of special steel cutters
1 x	lathe tools 12mm
1 x	DIL28W/SOIC28 ZIF 300mil
2 x	SPRAYOIL 200ml
2 x	Tungsten carbide cutter 1.0mm
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL44/SOIC44 ZIF-CS
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Brass contact cleaner brush
1 x	Socket Wrenches 3.2
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Socket Wrenches 2.0
2 x	VASELINE 200ml
1 x	DIL40/SOIC16 ZIF MB-1
1 x	Morse taper MT3 - B16
1 x	Disc cutters
1 x	Cylinder shaped milling cutters
2 x	Socket Wrenches 5.5
1 x	DIL16W/SOIC16 ZIF 150mil
2 x	DIL20/SOIC20 ZIF 200mil
1 x	Socket Wrenches 2.5
2 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	End mill for aluminium 4mm
3 x	Cutting tool HM 20 mm
1 x	Tungsten carbide cutter 3.0mm
1 x	Solid carbide stylus for engraving
1 x	Screwdriver bit set. 49-piece.
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	Ball shaped milling cutters
1 x	Universal and oil siphoning pump AP 12
1 x	MICRO Miller FF 230
1 x	SILICONE 200ml
1 x	DIL32/SOIC32 ZIF 445mil
1 x	Milling cutter set (2 - 5mm)
1 x	Socket Wrenches 4.0
2 x	lathe tools 10mm
1 x	Wolfram vanadium steel milling bits
1 x	DIL3/SOT23-3 ZIF-CS
1 x	Cylindrical cutters
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	Socket Wrenches 1.5
2 x	Cutting tool 16 mm
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Socket Wrenches 5.0
1 x	Socket Wrenches 3.0
1 x	End mill for aluminium 6mm
1 x	Cutting tool 10 mm
1 x	Set of precision cutters
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	6-piece screwdriver set ESD
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL28/PLCC28 ZIF
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	DIL44/QFN44-2 ZIF-CS
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Bottom PSOP44 NOR-2
1 x	TORX-screwdrivers T7
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	Replacement belts for BSL 220/E
2 x	PROLUB 200ml
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL32/SDIP64 ZIF H8-1
2 x	TORX-screwdrivers T8
2 x	BeeProg2
2 x	DIL28/PLCC32 ZIF EPROM
1 x	Lever Dial Indicator
2 x	TORX-screwdrivers T6
2 x	TORX-screwdrivers T9
1 x	Fine dust paper filter for CW-matic
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	DIL48/QFN48 ZIF-CS
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	DIL8/QFN8-1 ZIF-CS
2 x	TORX-screwdrivers T20
1 x	Top PSOP44 ZIF 600mil
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL42/SDIP42 ZIF 600mil
1 x	DIL32/PLCC32 ZIF
1 x	SPRAYFLON 200ml
2 x	TORX-screwdrivers T15
2 x	TORX-screwdrivers T10
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	DIL28/QFN28-2 ZIF-CS
1 x	TORX-screwdrivers T10
2 x	ANTISTATIC 200ml
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	PROTECTION 200ml
2 x	DIL20W/PLCC20 ZIF
1 x	DIL32/SDIP32 ZIF 400mil
2 x	Cutting tool 8 mm
1 x	Precision caliper square
1 x	ESD Tweezers 5-193
1 x	TOP-PIN 200ml
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL28/PLCC28 ZIF-CS
1 x	Five piece HSS chisel set
2 x	Cross-recess Screwdrivers 2
1 x	HSS immersion saw blades for OZI
1 x	Wrench Keys 2.0
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-215
1 x	BGA-Bottom-207
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cross-recess Screwdrivers 000
1 x	SCREEN 200ml
1 x	Dial gauge
1 x	Wrench Keys 2.5
1 x	DIL24/QSOP24 ZIF 150mil
1 x	BGA-Bottom-209
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Morse taper MT2 - B16
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BGA-Bottom-204
1 x	Independent four jaw chuck for the DB 250
1 x	Wrench Keys 1.5
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-212
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Cross-recess Screwdrivers 1
1 x	Collet Set for accurate use on round components
1 x	Wrench Keys 0.7
1 x	Cross-recess Screwdrivers 2
1 x	BGA-Bottom-198
1 x	Cross-recess Screwdrivers 1
1 x	Tool holder for rotary tools
1 x	BGA-Bottom-211
1 x	HSS cutting blade for OZI

€14,449.22