Top » Catalog » Programmers and acessories » Universal programmers » 60-0059

€859.00 + VAT

Beeprog2C
[60-0059]

Very fast universal USB/LPT interfaced programmer.

If you re focused to maximal speed of programing, see please at extremely fast BeeProg2C programmer.

Short description:

supported devices from manufactures
extremely fast programming, one of the fastest programmers in this category. Sustainable programming speed greater than 5 MBytes per second. Programs 2 GB eMMC NAND Flash in less than 365 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10 (32-bit and 64-bit*)
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
made in Slovakia
warranty - 3 years

More Information here: http://www.elnec.com/products/universal-programmers/beeprog2c/

Reviews

Customers who bought this product also purchased

BGA-Top-5 ZIF-CS

BGA-Bottom-88

DIL44/PSOP44 ZIF 600 mil

Shopping Cart

1 x	Tool holder for rotary tools
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Jig saw blades made of HSS
1 x	4-jaw chuck individually clamping 100mm
1 x	Centre Turning Attachment
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Gear Chuck
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Fluted filter for CW-matic
1 x	Cutter head for copy and surface milling MT3
2 x	Wood Lathe DB900
1 x	Fine dust paper filter for CW-matic
1 x	Diamond Coated
1 x	Beeprog2C
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	3-jaw chuck centrically clamping 100mm
1 x	Step clamps made of steel
1 x	Cutting tool 10 mm
1 x	Diamond cutting blade for OZI
1 x	DCMT070204
1 x	Sanding pads for OZI 220/E grit 150
1 x	CM2 - B16 - M10
1 x	Four Jaw Chuck
1 x	Cutting tool HM 20 mm
1 x	Machine Vice MS 4
1 x	Supercut jig saw blades of special steel
1 x	Cutting disc, with reinforcement
1 x	centrically clamping 100mm
1 x	Blade holders for DS 460
1 x	3-jaw chuck centrically clamping 80mm
1 x	Dial gauge
1 x	HSS immersion saw blades for OZI
2 x	Tungsten Carbide Tipped (TCT)
1 x	3-jaw chuck centrically clamping 160mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cutting tool 16 mm
1 x	Fixed Steady
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	HSS cutting blade for OZI
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	4-jaw chuck individually clamping 80mm
1 x	Cutting tool 8 mm
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Sanding pads for OZI 220/E grit 80
1 x	3-jaw chuck centrically clamping 125mm
1 x	Super-Cut
1 x	4-jaw chuck individually clamping 125mm
1 x	End milling cutter kit HSS 12 pcs
1 x	Cutter head for copy and surface milling MT2
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Sanding pads for OZI 220/E grit 240
1 x	Collet Set for accurate use on round components
1 x	Tungsten carbide cutters set
1 x	Hot wire cutter THERMOCUT 650
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 230/E
1 x	centrically clamping 125mm
1 x	Precision steel vice PM 40
1 x	HSS immersion saw blades for OZI
1 x	Grinding mop cylinder grit 80
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Diamond-coated cutting disc for MIC
1 x	Three-jaw steel drill chuck
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Footswitch FS
1 x	sanding belts for BBS/s Grit 150
1 x	MICROMOT extension cord. 300cm.
1 x	Flexishaft MICROMOT 110/P
1 x	MICROMOT steel collet set
1 x	Grinding mop cylinder grit 240
1 x	Grinding mop cylinder grit 120
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Dividing attachment TA 230 for PF 250
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Aluminium Die-Cast
1 x	Grinding mop cylinder grit 120
1 x	Mill/Drill Unit BFB 2000.
1 x	MICROMOT Mains Adapter NG 5/E
1 x	MICROMOT tool holder
1 x	Flexishaft MICROMOT 110/BF
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	MICROMOT drill stand MB 200
1 x	Universal polishing paste
1 x	Protective device for hand-operated MICROMOT

€6,630.17