Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
eight independent universal programming modules (BeeProg2 based) in one unit
extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
powerful independent pin-driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
graphics control unit with touch screen
very low voltage support for the latest Flash memory chips
ESD protection on each pin of the sockets
no adapter required for any DIL devices
Windows XP Embedded driven control PC internal to the programmer
unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Broca de alta duração de 2.1mm
1 x	broca de alta duração de 0,2mm
1 x	Broca de ponto 3.15 x 1.00
1 x	Broca de alta duração de 1.2mm
1 x	Super safety and specialty bit set, 75-piece
2 x	Diamond Coated
2 x	Footswitch FS
1 x	Half round cutter 13mm
1 x	Flexible silicon discs
1 x	Grinding and Polishing Machine SP/E
1 x	Grinding mop cylinder grit 120
1 x	Crimping plier for BNC
1 x	Broca de alta duração de 2.2mm
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Broca de alta duração de 2.3mm
1 x	High quality corundum grinding bits
2 x	Warding files set, 6pcs
1 x	Grinding mop cylinder grit 120
1 x	Broca de alta duração de 1.5mm
1 x	Flexishaft MICROMOT 110/BF
1 x	Broca de alta duração de 0.7mm
2 x	Flexishaft MICROMOT 110/P
1 x	Broca de alta duração de 0.3mm
1 x	Professional set for finish grinding and polishing
1 x	Broca de alta duração de 1.0mm
1 x	Flexible polishing pad set
1 x	Gear Chuck
1 x	Broca de ponto 3.15 x 1.25
1 x	Corundum sanding discs for LWS
1 x	Flap Wheels
1 x	Corundum fan sander for LWS
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Diamond Cutting Discs
1 x	Polishing Set
1 x	Corundum grinding disc for LWS
1 x	Grinding mop cylinder grit 80
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 2.4mm
1 x	Backing disc for LWS
1 x	Corundum fan sander for LWS
1 x	Corundum grinding disc for LWS
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 0.4mm
1 x	Diamond-coated cutting disc for MIC
1 x	Diamond Cutting Discs
1 x	Broca de ponto 6.30 x 2.50
1 x	Flexible silicon discs
1 x	Broca de ponto 8.00 x 3.15
1 x	Fluted filter for CW-matic
1 x	Thicknesser DH 40
1 x	Diamond Cutting Discs
1 x	Flap Wheels
1 x	Flexible polishing pad set
1 x	broca de alta duração de 0,6mm
2 x	Conjunto de três brocas de ponto
1 x	Broca de alta duração de 1.3mm
1 x	Hot wire cutter THERMOCUT 650
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 0.5mm
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Earthing module
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cut off/mitre saw KGS 80
1 x	MICRO Miller FF 230
1 x	MICRO cutter MIC
1 x	ESD Tweezers 5-193
1 x	OPTI BF16 Vario
1 x	TIP SPT-4
1 x	Precision caliper square
1 x	Chuck for TBM 220
1 x	Motor-driven carving device MSG
1 x	Lever Dial Indicator
1 x	Bench Circular Saw KS 230
1 x	MICROMOT drill stand MB 200
1 x	ESD Tweezers 5-192
1 x	Precision lathe PD 250/E
1 x	Jig saw STS 12/E
1 x	Blade holders for DS 460
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Table Saw FET
1 x	Scroll saw DS 230/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	BeeHive208S
1 x	2-speed scroll saw DSH
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	6-piece set of ESD/EGB tweezers
1 x	Lathe System PD 400
1 x	Dividing attachment TA 230 for PF 250
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	TIP SPT-6
1 x	Contact bracelet with spiral cord
1 x	Super-Cut
1 x	magnetic base 80kg
1 x	MICROMOT tool holder
1 x	Surface planer AH 80
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	TIP SPT-3
1 x	Steel tape measure
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Crocodile clip
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	TIP SPT-9
1 x	OPTI BF20L VARIO
1 x	Digital caliper gauge 300 mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Earth wire
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	MICRO Miller MF 70
1 x	BeeHive204
1 x	Super jig saw STS/E
1 x	ESD Tweezers 5-191
1 x	Conj 5 pinças ESD
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	TIP SPT-10
1 x	MICROMOT extension cord. 300cm.
1 x	TIP SPT-2
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	ESD Tweezers 5-194
1 x	Three piece thread cutting set

€21,275.35