€3,320.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews
Manufacturers
1 x DIL32/SDIP32 ZIF 400mil
1 x DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x DIL40/PLCC52 ZIF DS87C530
1 x DIL48/SDIP56 ZIF 68HC05Bx
1 x DIL40/PLCC28 ZIF AWM-1
1 x DIL32/SDIP64 ZIF H8-1
1 x DIL32/PLCC84 ZIF HS3334ESCF1H
1 x Tungsten carbide cutters set
1 x DIL42/SDIP42 ZIF 600mil
1 x DIL40/PLCC52 ZIF AWM-1
1 x DIL40/PLCC52 ZIF AWM-2
1 x DIL40/SDIP52 ZIF 55x
1 x DIL40/PLCC44 ZIF PIC-1
1 x DIL40/PLCC44 ZIF AWM-1
1 x BGA-Bottom-118
1 x DIL40/PLCC52 ZIF MCS51-2
4 x Replacement glue sticks for HKP 220
1 x DIL20/PLCC20 ZIF-CS
3 x BGA-0245/0243
2 x sanding belts for BBS/s Grit 150
1 x DIL28/PLCC28 ZIF-CS
1 x DIL20W/PLCC20 ZIF
2 x BGA-0246/0244
2 x sanding belts for BBS/s Grit 80
1 x DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x Beeprog2C
1 x DIL32/PLCC32 ZIF-CS NOR-1
1 x DIL32/PLCC32 ZIF
1 x DIL40/PLCC68 ZIF DS87C550
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x DIL28/PLCC28 ZIF
1 x DIL32/PLCC32 ZIF-CS
1 x DIL28/PLCC32 ZIF EPROM
1 x BeeProg2
2 x Four Jaw Chuck
2 x Gear Chuck
1 x PRECISION WIRE STRIPPER ESD-PLUS
2 x ACCENT SERVICE TOOLS SET
2 x Centre Turning Attachment
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x 6-piece wrench key set ESD
2 x 6-piece TORX-screwdriver-set ESD
1 x DIL44/MLF44-1 ZIF-CS
1 x Mini side cutters EUROline-Conductive
1 x Round nose pliers 45º EUROline-Conductive
2 x 6-piece screwdriver set ESD
1 x surface planing and thicknessing ADH 250
1 x DIL48/LQFP64 ZIF M16C/Tiny
2 x Mini side cutters EUROline-Conductive
2 x Fixed Steady
1 x Plastic magnifying glass
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x BGA-Bottom-1
1 x Solid carbide saw blade
1 x DIL48/LQFP64 ZIF M38039/M39049
2 x 6-piece set of ESD/EGB tweezers
1 x ESD Tweezers 5-191
2 x Collet Set for accurate use on round components
1 x PLCC Extractor
1 x Tungsten tipped saw blade
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x DIL32/MLF32-1 ZIF
1 x Side cutters EUROline-Conductive
3 x Universal polishing paste
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x DIL40/MLF64 ZIF-CS AVR-1
1 x End side cutters EUROline-Conductive
1 x CRIMPING PLIERS/WIRE STRIPPER
3 x 
1 x ESD Brushe
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x DIL24/QSOP24 ZIF 150mil
2 x Diamond-coated cutting disc for MIC
1 x Diamond blade
1 x End side cutters 45º EUROline-Conductive
1 x DIL8/SOT23-6 ZIF-CS PIC
1 x Tungstein carbide rasp - and cutting disc
1 x PLCC Puller
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Saw blade made of high-alloy special steel
1 x Mini side cutters EUROline-Conductive
2 x Tool holder for rotary tools
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Crosscut 'Super-Cut' blade
2 x 6-piece socket wrenches ESD
1 x Precision caliper square
1 x DIL48/PQFP100 ZIF PLD-1
1 x DIL28/TSSOP28 ZIF 170mil
1 x DIL24/TSSOP24 ZIF 170mil
1 x Screwdriver 2.0
2 x Felt cloth polishing disc (100 x 15mm)
1 x DIL48/PQFP100 ZIF ST10-1
1 x DIL48/PQFP144 ZIF ST10-1
1 x Replacement cutting disc for MICRO cutter MIC
1 x Cross-recess Screwdrivers 000
1 x DIL48/QFN48 ZIF-CS
1 x Screwdriver 1.5
1 x Screwdriver 0.8
1 x DIL8/QFN8-1 ZIF-CS
1 x Cross-recess Screwdrivers 2
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Cross-recess Screwdrivers 1
1 x DIL48/PQFP100 ZIF ST92Fxxx
1 x sanding belts for BBS/s Grit 240
1 x Cross-recess Screwdrivers 00
1 x DIL44/QFN44-2 ZIF-CS
1 x DIL40/VQFP64 ZIF AWM-1
1 x Cross-recess Screwdrivers 1
1 x Screwdriver 1.8
1 x DIL48/PQFP80 ZIF M58BW-1
1 x Screwdriver 1.2
1 x DIL28/QFN28-2 ZIF-CS
1 x Cross-recess Screwdrivers 2
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x DIL40/QFP64-3 ZIF NEC-1
1 x Radius Cutting Attachment, complete with pointed tool
€15,661.13
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook