€7,540.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Flexible silicon discs
1 x Footswitch FS
1 x Broca de alta duração de 2.2mm
1 x ACCENT SERVICE TOOLS SET
1 x Cross-recess Screwdrivers 2
3 x Blade for Wood and Plastics
1 x Boring Bar for CCMT
1 x Cross-recess Screwdrivers 00
1 x Half round cutter 13mm
1 x Pensander PS 13
1 x Cross-recess Screwdrivers 1
1 x Grinding mop cylinder grit 120
1 x Floor cover ESD
1 x Boring Bar for DCMT 10mm
1 x 6-piece screwdriver and cross-recess set ESD
1 x Grinding mop cylinder grit 120
1 x 6-piece screwdriver set ESD
2 x Boring Bar for CCMT 16mm
1 x Flexishaft MICROMOT 110/P
1 x Mini side cutters EUROline-Conductive
1 x Cross-recess Screwdrivers 1
1 x Table Sawr TKS 315 E
1 x Flexible polishing pad set
1 x SCLCR1010E06
1 x sclcr2525M12
1 x End side cutters 45º EUROline-Conductive
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Fluted filter for CW-matic
1 x 6-piece socket wrenches ESD
1 x Flap Wheels
1 x Flap Wheels
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Cross-recess Screwdrivers 2
1 x Earth wire
1 x Cross-recess Screwdrivers 0
1 x Earth wire
1 x Four Jaw Chuck
1 x Flexible silicon discs
1 x Morse taper MT3 - B16
1 x Cross-recess Screwdrivers Pozidriv 1
1 x Grinding and Polishing Machine SP/E
1 x 6-piece wrench key set ESD
1 x Earth wire with dummy Schunko-plug
1 x Flexishaft MICROMOT 110/BF
1 x Cross-recess Screwdrivers 000
1 x 6-piece TORX-screwdriver-set ESD
1 x Crocodile clip
1 x Precision quick-action drill chuck 0-16mm B16
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Blade guides separately
1 x Flexible silicon discs
1 x Gear Chuck
2 x 6-piece set of ESD/EGB tweezers
1 x Boring Bar for CCMT 8mm
1 x Cross-recess Screwdrivers Pozidriv 2
1 x Grinding mop cylinder grit 80
1 x Earthing module
1 x Grinding mop cylinder grit 240
2 x Band knife of hardened spring band steel (without teeth)
1 x High quality corundum grinding bits
2 x Extra narrow bandsaw blade (3.5mm) for tight radii
2 x Diamond blade for MBS 240/E
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Disc Sander TG 250/E
1 x ESD Tweezers 5-192
1 x Diamond Coated
1 x Disc Sander TG 125/E
1 x Felt polishers
1 x Collet Set for accurate use on round components
1 x Combi cutter 6.5/2.5mm
1 x High quality corundum grinding bits
1 x ESD Tweezers 5-193
1 x Brass brushes
1 x Blade for Steel and brass
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x High quality corundum grinding bits
1 x Compact workshop vacuum cleaner CW-matic
1 x Diamond Grinding Bits 1,8mm
1 x High quality corundum grinding bits
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x ESD Tweezers 5-194
1 x Tool holder for rotary tools
1 x Coarse-toothed (25 TPI per 25mm)
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Diamond blade
1 x Cylindrical cutters
€3,483.83
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook