€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
1 x Face clamping disc for D250X550
1 x Tool holder type H for SWH 1-A
1 x 3-jaw chuck centrically clamping 125mm
1 x Quick-action tool holder kit SWH AA
3 x Round nose pliers 160mm
3 x Side cutters 160mm
2 x Wire strippers 160mm
2 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Telephon pliers straight 160mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x Telephon pliers straight 200mm
2 x Flat nose pliers 160mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x Side cutters 180mm
3 x Combination pliers 185mm
1 x CM2 - B16 - M10
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Coarse-toothed (25 TPI per 25mm)
2 x Combination pliers 160mm
1 x EUROline set of pliers
1 x Blade holders for DS 460
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x EUROline side cutter rounded head
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Three jaw chuck for the lathe DB 250
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Collet Set for accurate use on round components
1 x Universal and oil siphoning pump AP 12
2 x Flap Wheels
1 x Engraving tool GG
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Gear Chuck
1 x Compact workshop vacuum cleaner CW-matic
1 x Jig saw blades made of HSS
1 x Four Jaw Chuck
2 x Angle cutter 45 °
1 x Drill chuck with sliding sleeve for the tailstock
1 x Combi cutter 6.5/2.5mm
1 x Plastic magnifying glass
1 x Precision lathe PD 250/E
1 x Crimping plier for BNC
1 x Replacement belts for BSL 220/E
1 x Tool holder for rotary tools
1 x Five piece HSS chisel set
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Router base OFV
1 x Core box bit 3.2mm
1 x Supercut jig saw blades of special steel
1 x Felt cloth polishing disc (100 x 15mm)
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Independent four jaw chuck for the DB 250
1 x V-slot cutter 6.5mm
1 x Chuck for TBM 220
2 x Replacement belts for BSL 220/E
1 x Pensander PS 13
1 x Three-jaw steel drill chuck
1 x Fine dust paper filter for CW-matic
2 x Lathe System PD 400
1 x Slot cutter 5.0mm
1 x Dividing attachment TA 230 for PF 250
1 x 
1 x Special Fused Alumina (Hardness N).
1 x Replacement belts for BSL 220/E
1 x Slot cutter 6.5mm
1 x Silicon-Carbide.
1 x Telephone pliers straight 205mm
1 x Centre Turning Attachment
1 x HSS twist drill set with centring pin
1 x Tungsten Carbide Tipped (TCT)
1 x Sanding Drums
1 x HSS drill bits 1.2mm
1 x Rounding over cutter 6.4mm
1 x Revolving center with replacement lathe centers
1 x Tungsten carbide drills Ø1mm
1 x Sanding bands 14x13mm
1 x Sanding bands 14x13mm
1 x HSS drill bits 0.5mm
1 x High quality corundum grinding bits
1 x 10-piece wood router cutter set
1 x High quality corundum grinding bits
1 x Slot cutter 3.2mm
1 x Edge cutter with pin 6.4mm
1 x Diamond Coated
1 x MICROMOT Mains Adapter NG 5/E
1 x Half round cutter 13mm
1 x Rebating cutter 6.4mm
1 x quantum revolving center CM1
1 x HSS drill bits 1.6mm
1 x HSS twist drill set to DIN 338
1 x MICROMOT Mains Adapter NG 2/S
1 x High quality corundum grinding bits
€7,830.53
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook