Top » Catalog » Programmers and acessories » GANG programmers » 60-0053

€2,950.00 + VAT

BeeHive204
[60-0053]

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
four independent universal programming modules (BeeProg2 based) in one unit
two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
powerful independent pin driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
Very low voltage support for latest Flash memory chips
ESD protection on each pin of the sockets
USB (up to 480 Mbit/s) interface to PC
comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
approved by CE laboratory to meet CE requirements
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Blade for Steel and brass
1 x	14-piece parallel supports set
1 x	Flexishaft MICROMOT 110/P
1 x	Aluminium Die-Cast
1 x	Mill/Drill Unit BFB 2000.
1 x	Three-jaw steel drill chuck
1 x	Flexishaft MICROMOT 110/BF
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	MICROMOT extension cord. 300cm.
1 x	Footswitch FS
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Dividing attachment TA 230 for PF 250
1 x	Ceramic tweezers 5-082
1 x	Blade for Wood and Plastics
1 x	MICROMOT drill stand MB 200
1 x	Blade guides separately
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	MICROMOT steel collet set
1 x	Diamond blade for MBS 240/E
1 x	Ceramic tweezers 5-081
1 x	MICROMOT tool holder
1 x	Band knife of hardened spring band steel (without teeth)
1 x	SMD Tweezers 5-071
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Lathe System PD 400
1 x	SMD Tweezers 5-062
1 x	Tweezer teflon-coated 5-021-9
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Three piece thread cutting set
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Precision lathe PD 250/E
1 x	SMD Tweezers 5-052
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Tweezer teflon-coated 5-107-9
1 x	HSS boring tool set, 6 pieces
1 x	SMD Tweezers 5-053
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Fluted filter for CW-matic
2 x	Insulation Resistance Tester MG125
1 x	Fine dust paper filter for CW-matic
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Insulation Resistance Tester MG500
1 x	SMD Tweezers 5-054
1 x	Glass fibre contact cleaner brush
1 x	SMD Tweezers 5-058
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	SMD Tweezers 5-075
1 x	Tweezer teflon-coated 5-117-9
1 x	SMD Tweezers 5-057
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	Side cutters 195mm
1 x	EUROline mini side cutter
1 x	Replacement belts for BSL 220/E
1 x	Replacement carving blades for MSG
1 x	Gear Chuck
1 x	Side cutters 180mm
1 x	EUROline mini side cutter
1 x	End side cutters 45º EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	PVC-insulated tweezers 5-121-6
1 x	Supercut jig saw blades of special steel
1 x	EUROline side cutter pointed head
1 x	Side cutters 160mm
1 x	PVC-insulated tweezers 5-117-6
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	EUROline mini side cutter
1 x	EUROline mini side cutter
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Side cutters 160mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Multiform grindstone
1 x	Collet Set for accurate use on round components
1 x	Mini side cutters EUROline-Conductive
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	sanding belts for BBS/s Grit 240
1 x	Replacement belts for BSL 220/E
1 x	sanding belts for BBS/s Grit 80
1 x	Side cutters EUROline-Conductive
1 x	Fixed Steady
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Tool holder for rotary tools
1 x	Side cutters 160mm
1 x	Mini side cutters EUROline-Conductive
1 x	sanding belts for BBS/s Grit 150
1 x	Centre Turning Attachment
1 x	Four Jaw Chuck
1 x	Super safety and specialty bit set, 75-piece
1 x	Universal and oil siphoning pump AP 12
1 x	Component tweezers 5-008
1 x	Cut off/mitre saw KGS 80
1 x	Sanding pads for OZI 220/E grit 80
1 x	MICRO woodturning lathe DB 250
1 x	Disc Sander TG 125/E
1 x	Cylinder sander WAS/E
1 x	Diamond cutting blade for OZI
1 x	Scroll saw DS 230/E
1 x	Angle polisher WP/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Grinding and Polishing Machine SP/E
1 x	Disc Sander TG 250/E
1 x	MICRO Band Saw MBS 240/E
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Surface planer AH 80
1 x	Screwdriver bit set. 49-piece.
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Motor-driven carving device MSG
1 x	Component tweezers 5-007
1 x	Micro Compound Table KT 70
1 x	MICRO cutter MIC
1 x	Bench Circular Saw KS 230
1 x	Component tweezers 5-009
1 x	Belt sander BS/E
1 x	Special Fused Alumina (Hardness N).
1 x	Delta sander OZI/E
1 x	HSS immersion saw blades for OZI
1 x	Long neck angle grinder LHW
1 x	HSS immersion saw blades for OZI
1 x	HSS cutting blade for OZI
1 x	Super jig saw STS/E
1 x	Table Saw FET
1 x	Component tweezers 5-006
1 x	MICRO shaper MP 400
1 x	Thicknesser DH 40
1 x	Sanding pads for OZI 220/E grit 150
1 x	Belt sander BBS/S
1 x	Polishing Set
1 x	Chuck for TBM 220
1 x	Sanding pads for OZI 220/E grit 240
1 x	Component tweezers 5-013
1 x	Polishing machine PM 100
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	2-speed scroll saw DSH
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Silicon-Carbide.
1 x	Pensander PS 13
1 x	Five piece HSS chisel set
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Complete Engraving Kit with trial glass
1 x	Diamond blade
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Three jaw chuck for the lathe DB 250
1 x	Antiallergical Tweezers 5-107-1
2 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	MICRO Heat gun MH 550
1 x	Hand Magnifier 2-293
1 x	Solid carbide saw blade
2 x	Hand magnifier with LED light 3X
1 x	Tungsten tipped saw blade
1 x	Independent four jaw chuck for the DB 250
1 x	Router base OFV
1 x	Antiallergical Tweezers 5-117-1
1 x	MICROMOT glue gun HKP 220
1 x	Universal holder UHZ
1 x	MICROFLAM gas soldering set MGS
1 x	Antiallergical Tweezers 5-155-1
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Engraving tool GG
1 x	Antiallergical Tweezers 5-121-1
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	MICRO-screwdrivers
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Crosscut 'Super-Cut' blade
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Saw blade made of high-alloy special steel
1 x	Plastic magnifying glass
1 x	Antiallergical Tweezers 5-125-1
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	ESD Brushe
1 x	BeeHive204
1 x	Glass fibre contact cleaner brush

€15,900.52

Quick Find

We Accept

Manufacturer Info


-	Elnec Homepage
-	Other products

What's New?

Grinding mop cylinder grit 240
€8.33

Languages

Share Product

€2,950.00 + VAT

BeeHive204[60-0053]

BeeHive204
[60-0053]