Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x Lathe tools 10mm pastilhados
1 x Broca de alta duração de 2.7mm
1 x lathe tools 12mm
1 x Cutting tool 8 mm
1 x lathe tools 10mm
1 x Broca de alta duração de 3.0mm
1 x Cutting tool 16 mm
1 x Lathe tools 8mm pastilhados
1 x Cutting tool HM 20 mm
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x TU 2404
3 x broca de alta duração de 0,6mm
3 x broca de alta duração de 0,2mm
1 x Fluted filter for CW-matic
3 x Broca de alta duração de 2.0mm
1 x Professional polishing sponge
1 x Edge cutter with pin 6.4mm
1 x V-slot cutter 6.5mm
2 x Broca de alta duração de 0.3mm
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Grinding mop cylinder grit 240
1 x Half round cutter 13mm
2 x Broca de alta duração de 0.9mm
3 x Broca de alta duração de 2.3mm
1 x Coarse-toothed (18 TPI per 25mm)
2 x Broca de alta duração de 2.4mm
1 x Super-fine sanding discs grain 2000
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x Broca de alta duração de 1.5mm
1 x Rounding over cutter 6.4mm
2 x Broca de alta duração de 2.1mm
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Combi cutter 6.5/2.5mm
1 x Grinding mop cylinder grit 120
2 x Broca de alta duração de 0.5mm
2 x Broca de alta duração de 0.4mm
1 x Grinding mop cylinder grit 80
3 x Broca de alta duração de 2.2mm
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Blade for Wood and Plastics
2 x Backing disc for LWS
1 x Slot cutter 5.0mm
3 x Broca de alta duração de 0.7mm
1 x TIP SPT-6
1 x Slot cutter 3.2mm
1 x Precision quick-action drill chuck 0-13mm B16
1 x Coarse-toothed (10 TPI per 25mm)
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x Broca de alta duração de 2.5mm
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Diamond blade for MBS 240/E
1 x Blade holders for DS 460
1 x Slot cutter 6.5mm
1 x Grinding mop cylinder grit 120
1 x Self-adhesive white corundum sanding discs for TG 250/E
2 x Broca de alta duração de 1.0mm
2 x Footswitch FS
1 x Professional set for finish grinding and polishing
1 x Broca de alta duração de 1.2mm
1 x Microfibre cloth
1 x Broca de alta duração de 0.8mm
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Rebating cutter 6.4mm
1 x Broca de alta duração de 1.4mm
1 x Core box bit 3.2mm
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Polishing felt, medium hard
1 x Blade for Steel and brass
1 x Super-fine sanding discs grain 000
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Lambswool polishing disc
1 x 10-piece wood router cutter set
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Super-fine sanding discs grain 400
1 x Coarse-toothed (25 TPI per 25mm)
1 x Blade guides separately
1 x Fine dust paper filter for CW-matic
1 x Micro Compound Table KT 70
1 x Silicon-Carbide.
1 x Sanding fleece for LWS
1 x Three-jaw steel drill chuck
1 x Sanding fleece for LWS
1 x Aluminium Die-Cast
1 x Replacement belts for BSL 220/E
1 x Five piece HSS chisel set
1 x Multiform grindstone
1 x Tungstein carbide rasp - and cutting disc
1 x Diamond-coated cutting disc for MIC
1 x MICROMOT extension cord. 300cm.
1 x Tungsten carbide cutters set
1 x Super-Cut
1 x Special Fused Alumina (Hardness N).
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Crimping plier for BNC
1 x Corundum fan sander for LWS
1 x Corundum bound cutting disc for LWS
1 x Corundum fan sander for LWS
1 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x Corundum grinding disc for LWS
1 x 14-piece parallel supports set
1 x Independent four jaw chuck for the DB 250
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Corundum sanding discs for LWS
1 x Mill/Drill Unit BFB 2000.
2 x Tungsten Carbide Tipped (TCT)
1 x Machine Vice MS 4
1 x Flexishaft MICROMOT 110/BF
1 x Replacement cutting disc for MICRO cutter MIC
1 x MICROMOT tool holder
1 x MICROMOT drill stand MB 200
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Precision steel vice PM 40
1 x Diamond blade
1 x Felt cloth polishing disc (100 x 15mm)
1 x Crosscut 'Super-Cut' blade
1 x MICROMOT steel collet set
1 x Universal polishing paste
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Tungsten tipped saw blade
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Cutting disc, with reinforcement
1 x Diamond-coated cutting and roughing disc
1 x Replacement belts for BSL 220/E
1 x sandpaper for PS 13 Grit 400
1 x Diamond Coated
1 x Step clamps made of steel
1 x Replacement belts for BSL 220/E
1 x Jig saw blades made of HSS
1 x 
1 x Dividing attachment TA 230 for PF 250
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Polishing Set
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Collet Set for accurate use on round components
1 x Hand Magnifier 2-293
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Gear Chuck
1 x Fixed Steady
1 x MICROMOT Mains Adapter NG 5/E
1 x MICROMOT Mains Adapter NG 2/S
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Tool holder for rotary tools
1 x Centre Turning Attachment
1 x MICROMOT Mains Adapter NG 2/E
1 x DUSTER-BR 200ml
1 x TUNER 200ml
€5,576.18
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Grinding mop cylinder grit 80
Grinding mop cylinder grit 80
€8.33
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online