Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	DIL34/SSOP34-1 ZIF-CS
2 x	Blade holders for DS 460
2 x	DIL40/MQFP52 ZIF ADuC812
1 x	Sanding Drums
2 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	Sanding Drums
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Sanding bands 14x13mm
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	Sanding Drums
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	Flap Wheels
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	Nylon Fleece Brushes
1 x	Hot wire cutter THERMOCUT 650
1 x	Sanding Discs
2 x	DIL48/SSOP90 ZIF Flash-1
1 x	Sanding Discs
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Sanding bands 14x13mm
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	Sanding Drums
1 x	Flap Wheels
1 x	Router base OFV
1 x	Metal Cutting Blades
2 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	DIL48/TQFP64-2 ZIF HC908-2
2 x	Diamond Cutting Discs
1 x	DIL48/TQFP64 ZIF HC908-2
1 x	DIL48/TQFP64-1 ZIF ST7-1
2 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
1 x	DIL48/TQFP64-2 ZIF ST7-1
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	DIL48/TQFP64 ZIF MSC1210
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	Milling cutter set (6 - 10mm)
1 x	Ball shaped milling cutters
1 x	DIL44/TQFP44-1 Zif
1 x	Set of special steel cutters
1 x	Tungsten carbide cutters set
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	Disc cutters
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	DIL40/TQFP52 ZIF EM652X
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	Tungsten carbide cutter 3.0mm
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL40/TQFP64 ZIF EM652X
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	Cone shaped milling cutter
1 x	Flame shaped milling cutters
1 x	Milling cutter set (2 - 5mm)
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	Wolfram vanadium steel milling bits
1 x	Set of precision cutters
1 x	Wolfram vanadium steel milling bits
1 x	Cylindrical cutters
1 x	Solid carbide stylus for engraving
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	Solid carbide stylus for engraving
1 x	DIL44/SSOP44 ZIF 240mil
1 x	Tungsten carbide cutter 2.0mm
1 x	DIL40/TQFP64 ZIF CC-1
1 x	Tungsten carbide cutter 1.0mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Cylinder shaped milling cutters
1 x	Ball-shaped diamond coated 3.2mm
1 x	DIL48/MQFP80 ZIF C164
1 x	Flexible polishing pad set
1 x	Flexible silicon discs
1 x	Cotton polishers
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	HSS drill bits 1.0mm
1 x	Flexible polishing pad set
1 x	Cotton polishers
1 x	Diamond Grinding Bits 1,8mm
1 x	Felt polishers
1 x	Felt polishers
1 x	Tungsten carbide drills Ø1mm
1 x	Edge cutter with pin 6.4mm
2 x	HSS twist drill set to DIN 338
1 x	Diamond Grinding Bits 5mm
1 x	Tungsten carbide drills Ø1,5mm
1 x	V-slot cutter 6.5mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	HSS drill bits 1.2mm
1 x	Diamond Twist Drills
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	Combi cutter 6.5/2.5mm
1 x	HSS twist drill set with centring pin
1 x	Rounding over cutter 6.4mm
1 x	HSS drill bits 0.8mm
1 x	Slot cutter 5.0mm
1 x	Felt polishers
1 x	Core box bit 3.2mm
1 x	Ball-shaped diamond coated 2.2mm
1 x	Rebating cutter 6.4mm
1 x	Slot cutter 3.2mm
1 x	Flexible silicon discs
1 x	DIL48/MQFP80 ZIF C500
1 x	Conjunto de três brocas de ponto
1 x	Half round cutter 13mm
1 x	Polishing paste
1 x	Flexible silicon discs
1 x	Angle cutter 45 °
1 x	Felt polishers
1 x	Slot cutter 6.5mm
1 x	HSS drill bits 0.5mm
1 x	Diamond Grinding Bits 1mm
1 x	HSS drill bits 1.6mm
1 x	Tungsten carbide drills Ø2mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	BGA-0245/0242
1 x	BGA-Bottom-101
1 x	BeeProg2
2 x	Cutting disc, with reinforcement

€12,023.15