€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Fresa de barra combinada 6.5/2.5mm
1 x	Fresa de ensamblar 6.4mm
2 x	Fresa em Tungsténio de 2 lâminas de 3.0mm
1 x	Torno Primus 100
1 x	Tupia de bancada MP 400
1 x	Interreptor de pé FS
1 x	Kit de fresas finas
1 x	Fresa em Tungsténio de 2 lâminas de 2.0mm
1 x	MICRO Miller FF 230
1 x	Kit de fresas pequenas
1 x	Torno Primus 75
1 x	Torno Mecânico PD 250/E
1 x	Fresa diamante esférica 1mm
1 x	MICRO chaves
1 x	Mini Drill de precisão FBS 240/E
1 x	Fresas esféricas
1 x	Lixas para PS 13 Grão 180
1 x	Micro mesa de cordenadas KT 70
1 x	Fresa diamante esférica 1.2mm
1 x	Transformador NG 5/E 12V-5A
1 x	Gear Chuck
1 x	10 Recargas para 2-166
1 x	Transformador NG 2/E 12V-2A
1 x	Fresa em Tungsténio de 2 lâminas de 1.0mm
1 x	Lixas para PS 13 Grão 240
1 x	Torno de precisão FMZ com grampo
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Mini berbequim de precisão FBS 12/EF - 12V
1 x	Lâmina com pastilhas em Tungsténio
1 x	Goiva eléctrica MSG
1 x	Micro engenho de furar TBM 220
1 x	MICROMOT 230/E (NOVO)
1 x	Mini Drill MICROMOT 50/E
1 x	Torno de precisão FMS 75 com ventosa
1 x	Mini Drill MICROMOT 50
1 x	Veio Flexível 110/P
1 x	Fresa diamante esférica 3.2mm
1 x	MICRO Miller MF 70
1 x	MICROFLAM maçarico MFB/E
1 x	BGA-0246/0243
1 x	BGA-Bottom-105
1 x	Boina de Polir em Musselina Tratada
1 x	BGA-0246/0244
1 x	BGA-Bottom-111
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	BGA-0245/0241
1 x	BGA-Bottom-11
1 x	BGA-0245/0243
1 x	ANTISTATIC 200ml
1 x	BGA-Bottom-103
1 x	DIL48/PQFP80 ZIF M58BW-1

€5,972.67