Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->
Torque Screwdriver

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Broca de alta duração de 2.9mm
1 x	DIL32/SOIC32 ZIF 445mil
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Broca de alta duração de 3.0mm
1 x	DIL48/SOIC20 ZIF LPC-1
1 x	Coarse-toothed (25 TPI per 25mm)
4 x	High quality corundum grinding bits
1 x	DIL3/SOT23-3 ZIF-CS
3 x	Broca de alta duração de 2.7mm
1 x	Blade holders for DS 460
1 x	Coarse-toothed (10 TPI per 25mm)
3 x	Broca de alta duração de 2.8mm
1 x	DIL20/SOIC20 ZIF 200mil
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
4 x	High quality corundum grinding bits
3 x	Broca de alta duração de 2.6mm
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	DIL8/SOIC8 ZIF 200mil
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
4 x	broca de alta duração de 0,6mm
1 x	Band knife of hardened spring band steel (without teeth)
4 x	Sanding bands 14x13mm
4 x	Conjunto de três brocas de ponto
5 x	Broca de alta duração de 2.4mm
3 x	Broca de alta duração de 0.7mm
3 x	Broca de alta duração de 0.9mm
4 x	Broca de alta duração de 2.0mm
3 x	Broca de alta duração de 1.1mm
2 x	Fibre-Cut Discs
2 x	Broca de alta duração de 2.2mm
3 x	Broca de alta duração de 0.4mm
1 x	Broca de ponto 8.00 x 3.15
2 x	Broca de alta duração de 2.3mm
4 x	Broca de alta duração de 2.5mm
2 x	Broca de alta duração de 0.8mm
3 x	Broca de alta duração de 0.5mm
3 x	Broca de alta duração de 1.2mm
3 x	Broca de alta duração de 1.0mm
3 x	Broca de alta duração de 2.1mm
3 x	Steel brushes
4 x	Broca de alta duração de 1.5mm
3 x	MICRO Miller FF 230
2 x	Tool holder type D for SWH 1-A
2 x	Broca de ponto 6.30 x 2.50
2 x	Broca de ponto 5.00 x 2.00
4 x	High quality corundum grinding bits
4 x	Broca de alta duração de 1.4mm
3 x	broca de alta duração de 0,2mm
2 x	HSS twist drill set to DIN 338
2 x	HSS drill bits 0.8mm
1 x	MICRO-screwdrivers
3 x	Broca de alta duração de 0.3mm
2 x	Tungsten carbide drills Ø1mm
3 x	Broca de alta duração de 1.3mm
1 x	HSS drill bits 1.2mm
1 x	Quick-action tool holder kit SWH AA
1 x	surface planing and thicknessing ADH 200
1 x	Collet chuck ER25 for D250X550
1 x	Tool holder type H for SWH 1-A
2 x	MICRO Miller FF 500
1 x	Follow rest for D250X550
1 x	Lathe chuck flange for D250X550
1 x	Steady rest for D250X550
1 x	machine base with shelves for D250X550
1 x	Collet chuck ER32 for D250X550
2 x	MICRO Miller MF 70
1 x	Face clamping disc for D250X550
1 x	DIL48/QFP100 ZIF NEC-1
1 x	DIL40/QFP100 ZIF AVR-1
1 x	Slot cutter 5.0mm
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	HSS twist drill set with centring pin
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL40/QFP144 ZIF H8S-1
3 x	Flap Wheels
1 x	Tungsten carbide drills Ø2mm
1 x	DIL40/QFP80 ZIF M37702
1 x	Combi cutter 6.5/2.5mm
1 x	DIL48/QFP100 ZIF PLD-3
3 x	Sanding bands 14x13mm
1 x	DIL48/QFP100 ZIF PLD-1
1 x	HSS drill bits 1.6mm
3 x	Sanding Drums
1 x	DIL48/QFP100 ZIF PLD-2
1 x	10-piece wood router cutter set
1 x	Cutting disc, with reinforcement
1 x	DIL48/QFP100 ZIF NEC-2
1 x	DIL40/QFP144 ZIF LPC-1
2 x	Slot cutter 3.2mm
1 x	HSS drill bits 1.0mm
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	Core box bit 3.2mm
1 x	Chuck for TBM 220
3 x	Sanding Drums
1 x	DIL48/QFP100 ZIF PLD-4
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL32/QFP64 ZIF H8-1
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	DIL28/QFP64 ZIF H8/3644
1 x	V-slot cutter 6.5mm
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	Tungsten carbide drills Ø1,5mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
3 x	End mill for aluminium 3mm
3 x	Flexible polishing pad set
3 x	High quality corundum grinding bits
1 x	Super-fine sanding discs grain 400
2 x	Milling cutter set (6 - 10mm)
2 x	Felt polishers
2 x	High quality corundum grinding bits
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	Flexible silicon discs
2 x	Felt polishers
2 x	Fibre-Cut Discs
1 x	End milling cutter kit HSS 20 pcs
2 x	Milling cutter set (2 - 5mm)
3 x	Polishing paste
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	DIL48/QFN48 ZIF-CS
1 x	sanding belts for BBS/s Grit 150
1 x	Diamond Cutting Discs
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL28/QFN28-2 ZIF-CS
2 x	Fibre-Cut Discs
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	Fibre-Cut Discs
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	High quality corundum grinding bits
2 x	Diamond Cutting Discs
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Tungsten carbide cutters set
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
3 x	Stainless steel wheels
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL44/QFN44-2 ZIF-CS
1 x	IC tweezers
2 x	Felt polishers
1 x	DIL8/QFN8-1 ZIF-CS
3 x	High quality corundum grinding bits
2 x	Flexible polishing pad set
1 x	Diamond Cutting Discs
2 x	Cotton polishers
2 x	Flexible silicon discs
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	sanding belts for BBS/s Grit 240
1 x	Mill/Drill Unit BFB 2000.
2 x	Steel cups
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
2 x	Fibre-Cut Discs
1 x	DIL44/TSOP44-II ZIF 400mil
2 x	Stainless steel cups
1 x	Fibre-Cut Discs
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	DIL32/MLF32-1 ZIF
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Top PSOP44 ZIF 600mil
1 x	DIL48/TQFP48-1 ZIF
2 x	Screwdriver 4.0
1 x	DIL48/PQFP100 ZIF ST10-1
2 x	Cotton polishers
1 x	DIL48/PQFP144 ZIF ST10-1
2 x	Sanding Discs
1 x	DIL40/TQFP64 ZIF EM652X
1 x	Bottom PSOP44 NOR-2
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	Steel wheels
1 x	DIL48/MQFP80 ZIF C500
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL44/TQFP44-1 Zif
1 x	Stainless steel brushes
1 x	Cutter head for copy and surface milling MT2
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	Bottom PSOP44 NOR-3
2 x	Flexible silicon discs
1 x	Sanding Drums
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL40/TQFP64 ZIF CC-1
2 x	Cotton polishers
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	Brass brushes
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	Bottom PSOP44 NOR-1
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	DIL48/MQFP80 ZIF C164
1 x	Cutter head for copy and surface milling MT3
1 x	Lathe tools 10mm pastilhados
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	BGA-Bottom-102
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	4-jaw chuck individually clamping 125mm
1 x	BGA-Bottom-126
1 x	BGA-Bottom-11
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	BGA-Bottom-125
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL8/SSOP8 ZIF 120mil
1 x	BGA-Bottom-106
1 x	BGA-Bottom-111
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	DIL48/SSOP48 ZIF 300mil
1 x	Felt polishers

€30,621.76